logo
  • Home
  • Research Interests

  • Courses
  • RASES Lab
  • Publications
  • CV
  • Contacts

Publications
  1. M. Ashouri, P. Rahmati, and Ali Hakkaki-Fard, “On the effect of corrugated conical frustum on pool boiling heat transfer", Experimental Thermal and Fluid Science, Vol. 130, 2022.
  2. A. Salari, Ali Hakkaki-Fard, and A. Jalalidil , “Hydrogen production performance of a photovoltaic thermal system coupled with a proton exchange membrane electrolysis cell", International Journal of Hydrogen Energy, 2021.
  3. Mahyar Ashouri, Ali Hakkaki-Fard, “Improving the performance of the finned absorber inclined rooftop solar chimney combined with composite PCM and PV module", Solar Energy, Vol. 228, 2021.
  4. Ali Salari, Mahyar Ashouri, Ali Hakkaki-Fard, “On the performance of inclined rooftop solar chimney integrated with photovoltaic module and phase change material: A numerical study", Solar Energy, Vol. 211, 2020.
  5. Mahyar Ashouri, Mohammad Mehdi Zarei, and Ali Hakkaki-Fard, “A Numerical Investigation on Natural Convection Heat Transfer in Annular-Finned Concentric Horizontal Annulus Using Nanofluids: A Parametric Study", Heat Transfer Engineering, Vol. 42, 2020.
  6. A. Sedaghat, M. Habibi, and A. Hakkaki-Fard, “A novel ground thermal recovery system for horizontal ground heat exchangers in a hot climate", Energy Conversion and Management, Vol. 224, 2020.
  7. S. Kavian, and A. Hakkaki-Fard, H.J. Mosleh, “Energy Performance and Economic Feasibility of Hot Spring-Based District Heating System–A Case Study", Energy, Vol. 211, 2020.
  8. M. Saffari Pour, A. Hakkaki-Fard, and B. Firoozabadi, “Numerical Investigation of a Portable Incinerator: A Parametric Study", Processes, Vol. 8, 2020.
  9. A. Amadeh, M. Habibi, and A. Hakkaki-Fard, “Numerical simulation of a ground-coupled heat pump system with vertical plate heat exchangers: A comprehensive parametric study", Geothermics, Vol. 88, 2020.
  10. A. Salari, A. Parcheforosh, A. Hakkaki-Fard, and A. Amadeh, “A numerical study on a photovoltaic thermal system integrated with a thermoelectric generator module", Renewable Energy, Vol. 153, pp. 1261-1271, 2020.
  11. M. Habibi, F. Aligolzadeh, and A. Hakkaki-Fard, “A Techno-Economic Analysis of Geothermal Ejector Cooling System", Energy, Vol. 193, 2020.
  12. A. Salari, A. Kazemian, T. Ma, A. Hakkaki-Fard, and J. Peng, “Nanofluid based photovoltaic thermal systems integrated with phase change materials: numerical simulation and thermodynamic analysis",Energy Conversion and Management, Vol. 205, 2020.
  13. B. Asgari, M. Habibi, and A. Hakkaki-Fard, “Assessment and comparison of different arrangements of horizontal ground heat exchangers for high energy required applications",Applied Thermal Engineering, Vol. 167, 2020.
  14. M. Habibi, A. Amadeh, and A. Hakkaki-Fard, “A numerical study on utilizing horizontal flat-panel ground heat exchangers in ground-coupled heat pumps", Renewable Energy, Vol. 147, pp. 996-1010, 2020.
  15. P. Rahmati, M. Ebrahimi-Dehshali, A. Hakkaki-Fard, “Enhancement of pool boiling heat transfer using ferromagnetic beads in a variable magnetic field", Applied Thermal Engineering, Vol. 164, 2020.
  16. H. Jafari Mosleh, A. Hakkaki-Fard, and M. DaqiqShirazi, “A year-round dynamic simulation of a solar combined, ejector cooling, heating and power generation system", Applied Thermal Engineering, Vol. 153, pp. 1-14, 2019.
  17. A. Salari, and Ali. Hakkaki-Fard, “A numerical study of dust deposition effects on photovoltaic modules and photovoltaic-thermal systems", Renewable Energy, Vol. 135, pp. 437-449, 2019.
  18. M. Habibi, and Ali. Hakkaki-Fard, “Long-term energy and exergy analysis of heat pumps with different types of ground and air heat exchangers", International Journal of Refrigeration, Vol. 100, pp. 414-433, 2019.
  19. F. Aligolzadeh, and Ali. Hakkaki-Fard, “A novel methodology for designing a multi-ejector refrigeration system", Applied Thermal Engineering, Vol. 151, pp. 26-37, 2019.
  20. E. Sedighi, A. Mazloom, and Ali. Hakkaki-Fard, “A novel methodology for designing a multi-ejector refrigeration systemUniform Cooling of a Flat Surface by an Optimized Array of Turbulent Impinging Air Jets", Heat Transfer Engineering, 2019.
  21. A. Kazemian, A Salari, A. Hakkaki-Fard, and T. Ma, “Numerical investigation and parametric analysis of a photovoltaic thermal system integrated with phase change material", Applied energy, Vol. 238, pp. 734-746, 2019.
  22. S. Kavian, M. Saffari Pour, and A. Hakkaki-Fard, “Optimized Design of the District Heating System by Considering the Techno-Economic Aspects and Future Weather Projection", Energies, Vol. 12, pp. 1733, 2019.
  23. M. Habibi, and A. Hakkaki-Fard, “Evaluation and improvement of the thermal performance of different types of horizontal ground heat exchangers based on techno-economic analysis", Energy Conversion and Management, Vol. 171, pp. 1177-1192, 2018.
  24. M. Ebrahimi Dehshali, S. Z. Najm Barzanji, and A. Hakkaki-Fard, “Pool Boiling Heat Transfer Enhancement by Twisted-Tape Fins", Applied Thermal Engineering, 2018.
  25. A. Hakkaki-Fard, Z. Aidoun, and M. Ouzzane, “A Computational Methodology for Ejector Design and Performance Maximisation", Energy Conversion and Management, Vol. 105, PP. 1291-1302, 2015.
  26. A. Hakkaki-Fard, P. Eslaminejad, Z. Aidoun, and M. Ouzzane, “A techno-economic comparison of a direct expansion ground-source and an air-source heat pump system in cold climates", Energy, Vol. 87, PP. 49-59, 2014.
  27. A. Hakkaki-Fard, Z. Aidoun, and M. Ouzzane, “Improving cold climate air-source heat pump performance with refrigerant mixtures", Applied Thermal Engineering, Vol. 78, PP. 695-703, 2015.
  28. A. Hakkaki-Fard, Z. Aidoun, and M. Ouzzane, “Applying refrigerant mixtures with thermal glide in cold climate air-source heat pumps", Applied Thermal Engineering, Vol. 62, No. 2, PP. 714-722, 2014.
  29. H. Kleine, E. Timofeev, A. Hakkaki-Fard and B. Skews, “The influence of Reynolds number on the triple point trajectories at shock reflection off cylindrical surfaces", JFM, Vol. 740, PP. 47-60, 2014.
  30. A. Hakkaki-Fard, and E. Timofeev, “On numerical techniques for determination of the sonic point in unsteady inviscid shock reflections", International Journal of Aerospace Innovations, Vol. 4, No. 1+2, pp. 41-52, 2012.
  31. H. Molavi, I. Pourshaban, A. Hakkaki-Fard, and M. Molavi, “Ablative materials' boundary condition simulation by applying inverse approach and Euler solver", AIAA journal of Thermophysics and Heat Transfer, Vol. 26, No. 1, pp. 47-56, 2012.
  32. H. Molavi, A. Hakkaki-Fard, M. Molavi, R. K. Rahmani, and A. Ayasofi, “Estimation of boundary conditions in the presence of unknown moving boundary caused by ablation", International Journal of Heat and Mass Transfer, Vol. 56, Issues 5-6, 2010.
  33. A. Hakkaki-Fard, F. Kowsary, A. Pourshaghaghy, M. Sefidgar, “Estimation of ablative parameters of ablative composites by nonlinear parameter estimation methods", Computational Thermal Sciences, Vol. 2, No. 4, pp. 371-379, 2010.
  34. H. Molavi, A. Hakkaki-Fard, and R.K. Rahmani, “A novel methodology for combined parameter and function estimation problems", ASME Journal of Heat Transfer, Vol. 132 (12), 2010.
  35. H. Molavi, R.K. Rahmani, A. Pourshaghaghy, E. Sharifi and A. Hakkaki-Fard, “Heat flux estimation in a nonlinear inverse heat conduction problem with moving boundary", ASME Journal of Heat Transfer, Vol. 132, No. 8, 2010.
  36. H. Molavi, I. Pourshaban, A. Hakkaki-Fard, M. Molavi, and R. K. Rahmani, “Inverse identification of thermal properties of charring ablators", Numerical Heat Transfer, Part B: Fundamentals, Vol. 56, No. 6, pp. 478-501, 2009.
  37. F. Kowsary, M. Sefidgar, A. Pourshaghaghy, A. Hakkaki-Fard, “Estimation of kinetic parameters of composite materials during the cure process using combined wavelet regularization method", Journal of Engineering Physics and Thermophysics (Springer-Verlag), Vol. 82, Issue 5, pp. 949-955, 2009.
  38. H. Molavi, A. Hakkaki-Fard, I. Pourshaban, M. Mahbubi Fard, and R. K. Rahmani, “Estimation of temperature-dependent thermophysical properties of non-charring ablators", AIAA journal of Thermophysics and Heat Transfer, Vol. 23, No. 1, pp. 50-58, 2009.
  39. S. Veiseh, N. Khodabandeh, A. Hakkaki-Fard, “Mathematical models for thermal conductivity-density relationship in fibrous thermal insulations for practical applications", Asian Journal of Civil Engineering (BUILDING & HOUSING), Vol. 10, No. 2, pp. 201-214, 2009.
  40. M. Sefidgar, A. Hakkaki-Fard, F. Kowsary, “Application of wavelet in highly ill-posed IHCP", Heat Transfer Engineering, Vol. 30, No. 6, pp. 516-527, 2009.
  41. S. Veiseh, A. Hakkaki-Fard, “Numerical modeling of combined radiation and conduction heat transfer in mineral wool insulations", Heat Transfer Engineering, Vol. 30, No. 6, pp. 477-486, 2009.
  42. S. Veiseh, A. Hakkaki-Fard, F. Kowsary, “Determining of the air/fiber conductivity of mineral wool insulations in building applications using parameter estimation methods”, Journal of Building physics, Vol. 32, No. 3, pp. 243-260, 2009.
  43. A. Hakkaki-Fard, F. Kowsary, “Heat flux estimation in a charring ablator”, Numerical Heat Transfer, Part A: Applications, Vol. 53, No. 5, pp. 543-560, 2008.
  44. H. Ahmadi-Noubari, A. Pourshaghaghy, F. Kowsary, A. Hakkaki-Fard, “Wavelet application for reduction of measurement noise effects in inverse boundary heat conduction problems”, International Journal of Numerical Methods for Heat and Fluid Flow, Vol. 18, Issue 2, pp. 217-236, 2008.
  45. M. Allahdadi-Mehrabadi, K. Sadeghy, A. Hakkaki-Fard, and M. Sefidgar, “On the use of inverse methods to parameter estimation in turbulent pipe flows of drag reducing polymers”, Journal of the Society of Rheology, Japan, Vol. 36, No. 5, pp. 241-251, 2008.
  46. A. Pourshaghaghy, A. Hakkaki-Fard, A. Mahdavi-Nejad, “Direct simulation of natural convection in a square porous enclosure”, Energy Conversion and Management, Vol. 48, Issue 5, pp. 1579-1589, 2007.
  47. S. Veiseh, M. M. Mirmohamadi, N. Khodabandeh, A. Hakkaki-Fard, “Assessment of parameters affecting compressive behavior of mineral wool insulations”, Asian Journal of Civil Engineering (BUILDING & HOUSING), Vol. 8, No. 4, pp. 359-373, 2007.
Selected Conference Papers
  1. F. Aligolzadeh, and A. Hakkaki-Fard, “Studying the effect of equation of state and turbulence modeling on numerical simulation of a supersonic ejector”, 17th Conference On Fluid Dynamics, fd2017, Aug., 27-29, Shahrood University of Technology, Shahrood, Iran, 2017.
  2. M. Habibi, and A. Hakkaki-Fard, “3-D simulation and performance evaluation of different types of vertical ground heat exchangers in order to determine their optimum installation distance”, 17th Conference On Fluid Dynamics, fd2017, Aug., 27-29, Shahrood University of Technology, Shahrood, Iran, 2017.
  3. A. Hakkaki-Fard, Z. Aidoun, and P. Eslami-Nejad, “Evaluation of Refrigerant Mixtures in Three Different Cold-Climate Residential Air-Source Heat Pumps”, ASHRAE Transactions, Vol. 122(2), 2016.
  4. P. Eslami-Nejad, A. Hakkaki-Fard, Z. Aidoun, and M. Ouzzane, “Technical Assessment of Ground-Source, Air-Source, and Hybrid Heat Pumps for Single-Family Buildings in Cold Climates”, ASHRAE Transactions, Vol. 122(2), 2016.
  5. A. Hakkaki-Fard, M. Poirier, Z. Aidoun, M. Ouzzane and D. Giguère, “An Experimental Study of Ejectors Supported by CFD", 24th IIR International Congress of Refrigeration ICR2015, Yokohama, Japan, August 2015.
  6. E. Timofeev, A. Hakkaki-Fard, H Kleine, and BW Skews, “On the Influence of Reynolds Number on the Mach Stem Height at Shock Reflection from a Circular Cylinder", 29th International Symposium on Shock Waves 2, PP. 1327-1332, 2015.
  7. A. Hakkaki-Fard, Z. Aidoun, and M. Ouzzane, “Assessment of refrigerant mixtures performance with thermal glide for cold climate air-source heat pumps", 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Orlando, Florida, 14-16 July, 2014.
  8. E. Timofeev, and A. Hakkaki-Fard, “On unsteady shock reflections from convex circular surfaces", 21st International Shock Interaction Symposium, Latvia, 2014.
  9. A. Hakkaki-Fard, Z. Aidoun, and M. Ouzzane, “Air-source heat pumps with refrigerant mixtures for cold climates", 11th International Energy Agency Heat Pump Conference, Montreal, May 12-16, 2014.
  10. H. Kleine, E. Timofeev, A. Hakkaki-Fard and B. Skews, “Shock reflection off cylindrical surfaces - influence of Reynolds number", 30th International Congress on High-Speed Imaging & Photonics, Pretoria, South Africa, 16 - 21 September, 2012.
  11. A. Hakkaki-Fard and E. Timofeev, “Determination of the sonic point in unsteady shock reflection using various techniques based on numerical flowfield analysis", 28th International Symposium on Shock Waves, Manchester, UK, 17-22 July, 2011.
  12. A. Hakkaki-Fard and E. Timofeev, “Numerical simulation of the weak perturbation technique for diagnostics of unsteady shock reflections", CFD Society of Canada 19th Annual Conference, Montreal, QC, 27-29 April, Canada, 2011.
  13. A. Hakkaki-Fard and E. Timofeev, “The effect of finite shock front thickness on the transition from regular to Mach reflection on a circular cylinder”, CFD Society of Canada 18th Annual Conference, London, Ontario, Canada, 17-19 May, 2010.
  14. E. Timofeev, A. Hakkaki-Fard, and Ying Yu Su, “Shock wave reflection from a circular cylinder”, 27th International Symposium on Shock Waves, 19-24 July, St. Petersburg, Russia, 2009.
  15. A. Hakkaki-Fard and E. Timofeev, “High resolution determination of sonic and detachment angles at shock wave reflection from a circular cylinder”, CFD Society of Canada 17th Annual Conference, Ottawa, Ontario, Canada, 3-5 May 2009.
  16. Ali Hakkaki-Fard, Ying Yu Su and E. Timofeev, “Numerical modeling of shock wave front structure using the Navier-Stokes equations and adaptive unstructured grids”, CFD Society of Canada 17th Annual Conference, Ottawa, Ontario, Canada, 3-5 May, 2009.
  17. A. Hakkaki-Fard, H. Molavi, and R. K. Rahmani, “A novel methodology for combined parameter and function estimation problems”, Proceedings of 2009 ASME Summer Heat Transfer Conference, July 19-23, 2009, San Francisco, Ca, USA.
  18. H. Molavi, A. Hakkaki-Fard, A. Pourshaghaghy, M. Molavi and R.K. Rahmani, “Heat flux estimation in a nonlinear inverse heat conduction problem with moving boundary”, Proceedings of 2009 ASME Summer Heat Transfer Conference, July 19-23, 2009, San Francisco, Ca, USA.
  19. H. Molavi, and A. Hakkaki-Fard, “Simultaneously estimation of thermal contact conductance and time dependent boundary heat flux”, FAME 2008, Sivakasi, Tamilnadu, India, December 11-13, 2008.
  20. A. Hakkaki-Fard, F. Kowsary, “Estimation of transient heat flux on a moving boundary, application: charring ablators”, 10th. UK Heat Transfer Conference, Edinburgh, Scotland, United Kingdom, September 10-12, 2007.
  21. M. Sefidgar, A. Hakkaki-Fard, F. Kowsary, “Neural network application in online heat flux estimation”, 15th. International Conference on Mechanical Engineering-ISME2007, Tehran, Iran, May 15-17, 2007.
Books
  1. S. Veiseh, N. Khodabandeh, and A. Hakkaki-Fard, “Properties of mineral wool insulation products including density, thermal conductivity and compressive stress”, BHRC Publication, No. R-506, 2009 (Available in Persian).
  2. S. Veiseh, N. Khodabandeh, A. Hakkaki-Fard, and H. Hakkaki-Fard, “Climatic conditions’ effect on the thermal insulation properties (polystyrene and mineral wool) and recommendations for their selection”, BHRC Publication, 978-600-113-091-5, 2011 (Available in Persian).