| 
                	 
                           
                             Publications & Patents
                            
                              
                                Journal Papers:
								
								• 
								 M. 
								A. Razavi, Z. Nasiri-Gheidari and F. 
								Tootoonchian, "Proposal for Suppressing the 
								Influence of Rotary Transformer’s Leakage Flux 
								on the Accuracy of Wound-Rotor Synchro," in IEEE 
								Sensors Journal, doi: 10.1109/JSEN.2025.3612213. 
								
								•  M. 
								A. Razavi, Z. Nasiri-Gheidari and F. 
								Tootoonchian, "A Robust Wound-Rotor Synchro 
								Design with a Compensation Winding for 
								Fault-Tolerant Operation," in IEEE Sensors 
								Journal, doi: 10.1109/JSEN.2025.3614706 
								
								 • 
								  M. 
								Golzarzadeh , Z. Nasiri-Gheidari , H. Oraee and 
								B. Ganji, "Integrated Analytical Modeling to 
								Predict Performance Characteristics of Linear 
								Switched Reluctance Motor," Scientia Iranica, 
								(2025): -, doi: 10.24200/sci.2025.65140.9346 
								
								 • 
								 A. 
								Farhadi-Beiranvand, S. Hajmohammadi, R. 
								Alipour-Sarabi, F. Tootoonchian and Z. 
								Nasiri-Gheidari, "Optimizing Resolver 
								Excitation: A Rotary Transformer-Based Filter 
								for Sinusoidal Wave Generation from Square Wave 
								Input," in IEEE Transactions on Transportation 
								Electrification, doi: 10.1109/TTE.2025.3610153.  
								
								• 
								  
								M. R. Eesazadeh, Z. Nasiri-Gheidari, 
								“Facilitating Winding Design and Performance 
								Evaluation of WR Synchro”, IJEEE vol. 21, no. 4, 
								pp. 3792-3792, 2025, doi:
								
								10.22068/IJEEE.21.4.3792URL: http://ijeee.iust.ac.ir/article-1-3792-en.html
 
								
								• 
								  
								M. A. Razavi, F. Tootoonchian and, Z. 
								Nasiri-Gheidari " Mitigating the Effects of 
								Rotary Transformer Leakage Flux on Brushless 
								Synchro Accuracy," in IJEEE, early access.  
								
								• 
								  
								M. R. Soleimani, Z. Nasiri-Gheidari, F. 
								Tootoonchian and H. Oraee, "Optimization and 
								Performance Evaluation of a Multiturn, Outer 
								Rotor VR Resolver for Enhanced Accuracy and 
								Manufacturability," in IEEE Transactions on 
								Instrumentation and Measurement, vol. 74, pp. 
								1-8, 2025, Art no. 9535208, doi: 
								10.1109/TIM.2025.3609383.  
								
								  • 
								 S. 
								Hajmohammadi, Z. Nasiri-Gheidari and F. 
								Tootoonchian, "Proposal of an Integrated 
								Wound-Rotor PCB-Resolver with a PCB Rotary 
								Transformer," in IEEE Sensors Journal, vol. 25, 
								no. 13, pp. 23973-23980, 1 July1, 2025, doi: 
								10.1109/JSEN.2025.3569709.  
								
								  • 
								 F. 
								Zare and Z. Nasiri Gheidari, "Minimizing 
								Position Errors in Helical Motion Resolvers 
								Through Optimal Turn Function Design," 
								Electromechanical Energy Conversion Systems, 
								vol. 4, no. 2, pp. 35-41, 2025, doi: 
								10.30503/eecs.2025.494201.1067 
								
								  • 
								 F. 
								Zare, F. Tootoonchian and Z. Nasiri-Gheidari, "A 
								New Resilient Configuration of Wound Rotor 
								Resolver in Mechanical Fault Conditions," 
								in IEEE Sensors Journal, vol. 25, no. 11, pp. 
								19069-19076, 1 June1, 2025, doi: 
								10.1109/JSEN.2025.3562268. 
								
								  • 
								 A. 
								Zibarzani and Z. Nasiri Gheidari, "Performance 
								Comparison of BLDC Machines in Flywheel 
								Applications: Hybrid vs. Conventional Magnet 
								Arrays," Electromechanical Energy Conversion 
								Systems, vol. 4, no.1, pp. 42-47, 2025, doi: 
								10.30503/eecs.2025.494442.1068 
								
								   • 
								 A. 
								Namdar and Z. Nasiri-Gheidari, "Detection of 
								Stator Interturn Fault in Induction Motors Using 
								SNR Concept," in IEEE Sensors Journal, vol. 25, 
								no. 6, pp. 9925-9933, 15 March15, 2025, doi: 
								10.1109/JSEN.2025.3534900.  
								
								  • 
								 M. 
								R. Soleimani, Z. Nasiri-Gheidari, F. 
								Tootoonchian and H. Oraee, "Optimal Design of 
								Outer Rotor VR Resolver Based on MEC Model," 
								in IEEE Sensors Journal, vol. 25, no. 3, pp. 
								4440-4447, 1 Feb.1, 2025, doi: 
								10.1109/JSEN.2024.3520339. 
								
								• 
								  
								M. R. Eesazadeh, Z. Nasiri-Gheidari and F. 
								Tootoonchian, "Innovative Winding and Tooth-Pole 
								Configurations in the Development of Variable 
								Reluctance Synchro," in IEEE Sensors Journal, 
								vol. 25, no. 2, pp. 2494-2501, 15 Jan.15, 2025, 
								doi: 10.1109/JSEN.2024.3507935.  
								
								
								  
								• 
								 S. 
								A. Seyed-Bouzari, M. R. Eesazadeh, F. 
								Tootoonchian and Z. Nasiri-Gheidari, 
								"Development of a Multiturn Linear Variable 
								Reluctance Resolver With Integrated 
								Ferromagnetic Core," in IEEE 
								Sensors Journal, vol. 24, no. 19, pp. 
								29898-29905, 1 Oct.1, 2024, doi: 
								10.1109/JSEN.2024.3447232.  
								
								  •  G. 
								S. Moghaddam, Z. Nasiri-Gheidari and R. 
								Alipour-Sarabi, "Hybrid Excitation for a Wide 
								Speed Range Linear Sinusoidal Area Variable 
								Reluctance Resolver," in IEEE 
								Transactions on Instrumentation and Measurement, 
								vol. 73, pp. 1-7, 2024, Art no. 7507007, doi: 
								10.1109/TIM.2024.3406812. 
								
								
								  
								• 
								S. Hajmohammadi and Z. Nasiri-Gheidari, 
								"Proposal of a Wound-Rotor PCB-Resolver," in IEEE 
								Transactions on Industrial Electronics, 
								vol. 71, no. 11, pp. 15122-15129, Nov. 2024, doi: 
								10.1109/TIE.2024.3376807.  
								
								  •  G. 
								S. Moghaddam, Z. Nasiri-Gheidari and R. 
								Alipour-Sarabi, “Field Reconstruction Modeling 
								Method of a Linear Variable Area Resolver”, 
								Scientia Iranica, early access 
								 
								
								
								
								•  
								
								
								M. R. Eesazadeh and Z. Nasiri-Gheidari, "Winding 
								Selection for Wound-Rotor Synchro," in IEEE 
								Sensors Journal, vol. 24, no. 1, pp. 
								215-222, 1 Jan.1, 2024, doi: 
								10.1109/JSEN.2023.3332734.  
								
								
								  
								• 
								 H. 
								Lasjerdi, Z. Nasiri-Gheidari, “Improving the 
								Performance of Variable Reluctance Resolver 
								Against Short Circuit Using Physical 
								Parameters”, Scientia Iranica, 2023 
								
								•    M. 
								Ghaem-Maghami and Z. Nasiri-Gheidari, "Design 
								Optimization of Linear Variable-Reluctance 
								Resolver for Higher Accuracy and Smaller Size," 
								in IEEE Sensors Journal, vol. 23, no. 15, pp. 
								16764-16771, 1 Aug.1, 2023, doi: 
								10.1109/JSEN.2023.3288288. 
								
								
								  
								• 
								 A. 
								Ashouri-Zadeh, Z. Nasiri-Gheidari, “Force Ripple 
								Reduction Methods for Tubular Permanent Magnet 
								Linear Machines”, Scientia Iranica, 2023 
								
								
								  
								• 
								
								S. A. Seyed-Bouzari, H. Saneie and Z. 
								Nasiri-Gheidari, "Analysis and Compensation of 
								the Longitudinal End-Effect in Variable 
								Reluctance Linear Resolvers Using Magnetic 
								Equivalent Circuit Model," in IEEE Transactions 
								on Transportation Electrification, doi: 
								10.1109/TTE.2023.3239500. 
								
								•    M. 
								KhajueeZadeh, F. Zare and Z. Nasiri-Gheidari, 
								"Reliability Analysis of Two Resolver 
								Configurations Under Faulty Conditions in 2DOF 
								System," in IEEE Transactions on Instrumentation 
								and Measurement, vol. 72, pp. 1-8, 2023, Art no. 
								9000408, doi: 10.1109/TIM.2022.3229711, vol. 72, 
								2023 
								
								•    H. 
								Saneie, Z. Nasiri-Gheidari and A. Belahcen, "On 
								the Field-Reconstruction Method for 
								Electromagnetic Modeling of Resolvers," in IEEE 
								Transactions on Instrumentation and Measurement, 
								vol. 72, pp. 1-8, 2023, Art no. 9000608, doi: 
								10.1109/TIM.2022.3224527,vol. 72, 2023   
								 
								
								•    M.S. KhajueeZadeh, S. Feizhoseini, Z. 
								Nasiri-Gheidari, and M. Behzad “Analysis of 
								Torsional Vibrations on the Resolver under 
								Eccentricity in PMSM Drive System, IEEE Sensors 
								Journal, early access 
								
								•    A. 
								Keyvannia, and Z. Nasiri-Gheidari, " A 
								Comprehensive Winding Method for Linear 
								Variable-Reluctance Resolvers to Compensate for 
								the End Effects " in IEEE Transactions on 
								Industrial electronics, early access 
								
								•    F. 
								Zare and Z. Nasiri-Gheidari, “Improving 
								the performance of helical motion resolver based 
								on accurate modelling of longitudinal end effect”, 
								IET Electric Power Applications, vol. 16, no. 
								10, pp. 1212-1222, 2022 
								
								
								  
								• 
								
								A. Koushki, Z Nasiri Gheidari, “On 
								Performance Analysis of Coreless Permanent 
								Magnet Machine”, Electromechanical Energy 
								Conversion Systems, vol. 2, no.1, 2022 
								
								•    F. 
								Zare and Z. Nasiri-Gheidari, "Helical Motion 
								Wound-Rotor Resolver," in IEEE 
								Sensors Journal, vol. 22, no. 10, pp. 9371-9377, 
								15 May15, 2022, doi: 10.1109/JSEN.2022.3167427. 
								
								•    
								
								
								F. Zare and Z. Nasiri-Gheidari, "Magnetic 
								Equivalent Circuit Model for Predicting 
								Performance of 2DOF Wound Rotor Resolver," 
								in IEEE Sensors Journal, vol. 21, no. 19, pp. 
								21417-21424, 1 Oct.1, 2021, doi: 
								10.1109/JSEN.2021.3102068. 
								 
								
								•    F. 
								Zare A. Keyvannia, and Z. Nasiri-Gheidari, " 
								Presentation of a Novel Variable-Reluctance 
								Tubular Resolver," in IEEE Transactions on 
								Industrial electronics, early access 
								
								•    G. 
								Rezazadeh, F. Tahami, G. -A. Capolino, Z. 
								Nasiri-Gheidari, H. Henao and M. Sahebazamani, 
								"Improved Design of an Outer Rotor Six-Phase 
								Induction Motor with Variable Turn 
								Pseudo-Concentrated Windings," in IEEE 
								Transactions on Energy Conversion, doi: 
								10.1109/TEC.2021.3126538 
								
								•    G. 
								Rezazadeh, F. Tahami, G. Capolino, Z. 
								Nasiri-Gheidari, H. Henao and M. Sahebazamani, 
								"Improved design of a Six-Phase Squirrel Cage 
								Induction Motor with Pseudo-Concentrated 
								Windings," in IEEE Journal of Emerging and 
								Selected Topics in Industrial Electronics, doi: 
								10.1109/JESTIE.2021.3137056. 
									
									
									
									•   
									
									F. Zare and Z. Nasiri-Gheidari, "Winding 
									Function Model for Predicting Performance of 
									2-DOF Wound Rotor Resolver," in IEEE 
									Transactions on Transportation 
									Electrification, 
									vol. 8, no. 2, pp. 2062-2069, June 2022, doi: 
									10.1109/TTE.2021.3114210.
									
									
									•  A. 
									Moheyseni, Z. Nasiri-Gheidari and R. 
									Alipour-Sarabi, "Slotless Disk Type Resolver: 
									A Solution to Improve the Accuracy of 
									Multi-Speed Wound Rotor Resolvers," in IEEE 
									Transactions on Transportation 
									Electrification, doi: 
									10.1109/TTE.2021.3111702.
									
									
									
									•  F. 
									Zare and Z. Nasiri-Gheidari, "Magnetic 
									Equivalent Circuit Model for Predicting 
									Performance of 2DOF Wound Rotor Resolver," 
									in IEEE Sensors Journal, doi: 
									10.1109/JSEN.2021.3102068.
									
									
									
									•  M.S. 
									KhajueeZadeh, H. Saneie, and Z. 
									Nasiri-Gheidari, " Development of a Hybrid 
									Reference Model for Performance Evaluation 
									of Resolvers," in IEEE Transactions on 
									Instrumentation and Measurement, early 
									access.
									
									
									
									•  H. 
									Saneie and Z. Nasiri-Gheidari, "Generalized 
									Non-Overlapping Tooth Coil Winding Method 
									for Variable Reluctance Resolvers," in IEEE 
									Transactions on Industrial Electronics, doi: 
									10.1109/TIE.2021.3084157.
									
									
									
									•  F. 
									Zare and Z. Nasiri-Gheidari, "Proposal of a 
									2DOF Wound-Rotor Resolver," in IEEE Sensors 
									Journal, doi: 10.1109/JSEN.2021.3089540.
									
									
									
									•  A. 
									Paymozd, H. Saneie, A. Daniar and Z. 
									Nasiri-Gheidari, "Accurate and Fast 
									Subdomain Model for Electromagnetic Design 
									Purpose of Wound-Field Linear Resolver," in 
									IEEE Transactions on Instrumentation and 
									Measurement, vol. 70, pp. 1-8, 2021, Art no. 
									9003408, doi: 10.1109/TIM.2021.3080400.
									
									
									
									•  S. 
									Hajmohammadi, H. Saneie, Z. Nasiri-Gheidari 
									and F. Tootoonchian, "Optimal Design and 
									Performance Analysis of a Double-Sided 
									Multi-Turn Wound-Rotor Resolver," in IEEE/ASME 
									Transactions on Mechatronics, doi: 
									10.1109/TMECH.2021.3066815.
									
									
									
									•  H. 
									Saneie, A. Daniar, and Z. Nasiri-Gheidari, 
									“Design Optimization of a Low Speed Small 
									Scale Modular Axial Flux Permanent Magnet 
									Synchronous Generator for Urban Wind Turbine 
									Application”, Scientia Iranica, early access 
								
								
								• H. Lasjerdi, and Z. Nasiri-Gheidari, “A 
								Comprehensive Analysis of Short-Circuit Fault in 
								Wound-Rotor Resolvers”, IEEE Trans. On Vehicular 
								Technology, early access   
									
									
									
									
									•  H. Saneie, Z. Nasiri-Gheidari, F. 
									Tootoonchian, and A. Daniar “Simplified 
									Winding Arrangement for Integrated 
									Multi-Turn Resolvers”, IEEE Transactions on 
									Industrial Electronics, accepted for 
									publication 
								
								
								•  M. Bahari, Z. Nasiri-Gheidari, and F. 
								Tootoonhian, “Modeling, Performance Analyzing, 
								and Prototyping of Variable Reluctance Resolver 
								with Toroidal Winding”, IEEE Sensors Journal, 
								early access   
								
								
								•  H. Lasjerdi, Z. Nasiri-Gheidari, F. 
								Tootoonchian, “Static Eccentricity Fault 
								Diagnosis in Wound-Rotor Resolvers”, IEEE 
								Sensors Journal, vol. 21, no. 2, pp. 1424-1432, 
								2021   
								
								
								•   H. Saneie, and Z. Nasiri-Gheidari, “Performance 
								Analysis of Outer-Rotor Single-Phase Induction 
								Motor Based on Magnetic Equivalent Circuit (MEC)”, 
								IEEE Transactions on Industrial Electronics,
								
								
								vol. 68, 
								no. 2, pp. 1046-1054, 2021 
								  
								
								
								• M. Bahari, Z. Nasiri-Gheidari, “The 
								Comparative Analysis of AC-Flux and DC-Flux 
								Resolvers”, Scientia Iranica, , early access 
								  
								
								
								• A. Paymozd, H. Saneie, Z. Nasiri-Gheidari, F. 
								Tootoonchian, “Subdomain Model for Predicting 
								the Performance of Linear Resolver Considering 
								End Effect and Slotting Effect”, IEEE Sensors 
								Journal, 
								
								vol. 20, no. 24, pp. 14747-14755, 2020 
								  
								
								
								•  H. Lasjerdi, Z. Nasiri-Gheidari, F. 
								Tootoonchian, “Online 
								Static/Dynamic Eccentricity Fault Diagnosis in 
								Inverter-Driven Electrical Machines using 
								Resolver Signals”, IEEE Trans. On Energy 
								Conversion, 
								
								vol. 35, no. 4, pp. 1973-1980, 2020 
								  
								
								
								• G. Rezazadeh, F. Tahami, G. Capolino, S. 
								Vaschetto, Z. Nasiri-Gheidari, H. Henao, “Improvement 
								of Concentrated Winding Layouts for Six-Phase 
								Squirrel Cage Induction Motors”, IEEE Trans. 
								On Energy Conversion, 
								
								vol. 35, no. 4, pp. 1727-1735, 2020 
								  
								
								
								• H. 
								Saneie, Z. Nasiri-Gheidari and F. Tootoonchian, 
								“Structural Design and Analysis of a High 
								Reliability Multi-Turn Wound-Rotor Resolver for 
								Electric Vehicle”, IEEE Trans. on Vehicular 
								Technology, vol. 69, no. 5, pp. 4992-4999, 2020 
								  
								
								
								• S. Haj-Mohammadi, R. Alipour-Sarabi, Z. 
								Nasiri-Gheidari, and F. Tootoonchian, “Influence 
								of Different Installation Configurations on the 
								Position Error of a Multi-Turn Wound-Rotor 
								Resolver”, IEEE Sensors Journal, vol. 20, no. 
								11, pp. 5785 - 5792, June 2020 
								  
								
								
								 • H. Saneie, Z. Nasiri-Gheidari, and F. 
								Tootoonchian, “Design and Prototyping of a 
								Multi-Turn Sinusoidal Air-gap Length Resolver”, 
								IEEE Trans. on Energy Conversion, vol. 35, no. 
								1, pp. 271 – 278, March 2020   
								
								
								•  M. Bahari, A. Davoodi, H. Saneie, F. 
								Tootoonchian, and, Z Nasiri-Gheidari, “A New 
								Variable Reluctance PM-Resolver”, IEEE Sensors 
								Journal, 
								vol. 20, no. 1, pp. 135 – 142, Jan. 2020 
								
								   
								
								•   
								 R. 
								Alipour-Sarabi, Z. Nasiri-Gheidari, and H. Oraee, 
								“Development of a 3-D Magnetic Equivalent 
								Circuit Model for Axial Flux Machines”, IEEE 
								Transactions on Industrial Electronics, vol. 
								67, no. 7, pp. 5758 – 5767, July 2020 
								
								  
								
								 • 
								
								
								  S. 
									Tavakoli, and Z. Nasiri-Gheidari, “Static 
									Eccentricity Fault Diagnosis in a 
									Cylindrical Wound-Rotor Resolver”, 
									International Journal of Industrial 
									Electronics, Control and Optimization, 
								
								
								vol. 3, no.1, pp. 19-26, 2020 
									
									
									
									
									 •    M. Ghasemian, F. Tahami, 
									and Z. Nasiri-Gheidari, “Optimal design of a 
									flux reversal permanent magnet machine as a 
									wind turbine generator”, Turkish Journal of 
									Electrical and Computer Sciences, 
									
									vol. 28, pp. 693 – 707, 2020
									
									
									
									•   H. 
									Saneie, Z. Nasiri-Gheidari, and F. 
									Tootoonchian, “Accuracy Improvement in 
									Variable Reluctance Resolvers”, IEEE Trans. 
									on Energy Conversion, 
									vol. 34, no. 3, pp. 1563 – 1571, Sept. 2019
									
									
									
									 •   
									
									M. Bahari, R. 
									Alipour-Sarabi, Z. Nasiri-Gheidari, and F. 
									Tootoonchian, “Proposal of Winding Function 
									Model for Geometrical Optimization of Linear 
									Sinusoidal Area Resolver”, IEEE Sensors 
									Journal, 
									
									vol. 19 no. 14, pp. 5506 – 5513, July 2019 
									
									
									  
									
									
									 •  
									
									M. Mohammad-Yari, 
									M. Safari, R. Alipour-Sarabi, Z. 
									Nasiri-Gheidari, and F. Tootoonchian, 
									“Optimal Winding Selection for Wound-Rotor 
									Resolvers”, Scientia Iranica, early access 
									
									
									   
									
									
									 •  
									
									  M. 
									Rayati, S. Amirzadeh Goghari, Z. 
									Nasiri-Gheidari, A.M. Ranjbar, “An optimal 
									and decentralized transactive energy system 
									for electrical grids with high penetration 
									of renewable energy sources”, Electrical 
									Power and Energy Systems, vol.113, pp. 
									850–860, 2019
									
									
									
									 • 
									
									   
									M. Alemi-Rostami, R. Alipour-Sarabi, G. 
									Rezazadeh, Z. Nasiri-Gheidari, and H. Oraee, 
									“Design Optimization of a Double-Stage 
									Resolver”, IEEE Transactions on Vehicular 
									Technology, 
									
									vol. 68, no. 6, pp. 5407 – 5415, June 2019 
									
									
									  
									
									
									 •   
									
									R. 
									Alipour-Sarabi, Z. Nasiri-Gheidari, and H. 
									Oraee, “Misconception 
									of Total Harmonic Distortion in resolvers”,  
									Electromechanical Energy Conversion Systems 
									(EECS), vol. 1, no. 01, 38-43, 2019 
									
									    
									 
									
									 •   H. Lasjerdi, 
									Z. Nasiri-Gheidari, F. Tootoonchian, “A 
									Comprehensive Mathematical Model for 
									Analysis of WR-Resolvers under Stator Short 
									Circuit Fault”, Journal of Electrical and 
									Computer Engineering Innovations,
									vol. 7, no. 1, pp. 11-18, 2019 
									
									
									   
									
									
									 •  R. Alipour-Sarabi, Z. 
									Nasiri-Gheidari, F. Tootoonchian and H. 
									Oraee, “Improved Winding Proposal for Wound   Rotor Resolver Using Genetic Algorithm and 
									Winding Function Approach”, IEEE 
									Transactions on Industrial Electronic, vol. 
									66, no. 2, pp. 1325-1334, 2019
									
									
									
									•  F. Zare, Z. Nasiri-Gheidari, and F. 
									Tootoonchian, “The effect of winding 
									arrangements on measurement accuracy of 
									sinusoidal rotor resolver under fault 
									conditions”, Measurement, Elsevier, vol. 
									131, pp. 162-172, 2019
									
									
									
									 •  H. Saneie, R. Alipour-Sarabi, 
									Z. Nasiri-Gheidari, and F. Tootoonchian, 
									“Challenges of Finite Element Analysis of 
									Resolvers”, IEEE Trans. On Energy 
									Conversion, 
									
									vol. 34, no. 2, pp. 973-983, 2018
									
									
									
									  •  
									M. Ghods, Z. Nasiri-Gheidari, and H. Oraee, 
									“Performance Analysis of Permanent Magnet 
									Vernier Generator under Mechanical Faults”, 
									International Journal of Industrial 
									Electronics, Control and Optimization, vol. 
									1, no. 2, pp. 121-131, Sep. 2018
									
									
									
									  •  F. Abolqasemi Kharanaq, 
									R. Alipour-Sarabi, Z. Nasiri-Gheidari, and 
									F. Tootoonchian, “Magnetic Equivalent Circuit 
									Model for Wound Rotor Resolver without 
									Rotary Transformer’s Core”, IEEE Sensors J., 
									vol. 18, no. 21, pp. 8693-8700, 2018
									
									
									
									 • M. Rayati, S. Amirzadeh Goghari, Z. 
									Nasiri-Gheidari, and A. M. Ranjbar, “Robust 
									and Dynamic Transactive Energy System Using 
									Tsypkin-Polyak Theorem”, IET Smart Grid, 
									vol. 1, no. 2, pp. 57-65, 2018
									
									
									
									 • A Daniar, Z Nasiri-Gheidari, F 
									Tootoonchian, “Performance Analysis of 
									Linear Variable Reluctance Resolvers Based 
									on Improved Winding Function Approach”, IEEE 
									Energy Conversion, vol. 33, no. 3, pp. 
									1422-1430, SEPTEMBER 2018
									
									
									
									 • M. Ghods, Z. Nasiri-Gheidari, F. 
									Tootoonchian and H. Oraee, " Design 
									Improvement of a Small, Outer Rotor, 
									Permanent Magnet Vernier Generator for 
									Supplying Traffic Enforcement Camera”, IEEE 
									Energy Conversion, vol. 33, no. 3, pp. 
									1213-1221, SEPTEMBER 2018
									
									
									
									 • H. Saneie, Z. Nasiri-Gheidari, F. 
									Tootoonchian, “Design-Oriented Modeling of 
									Axial-flux Variable-reluctance Resolver 
									Based on Magnetic Equivalent Circuits and 
									Schwarz–Christoffel Mapping”, IEEE 
									Transactions on Industrial Electronic, vol. 
									65, no. 5, pp. 4322-4330, May 2018.
									
									
									
									 • R. Alipour-Sarabi, Z. 
									Nasiri-Gheidari, F. Tootoonchian and H. 
									Oraee, "Performance Analysis of Concentrated 
									Wound-Rotor Resolver for Its Applications in 
									High Pole Number Permanent Magnet Motors," 
									IEEE Sensors J., vol. 17, no. 23, pp. 
									7877-7885,Dec. 2017
									
									
									
									 • Z. Nasiri-Gheidari, “Design, Performance 
									Analysis, and Prototyping of Linear 
									Resolvers”, IEEE Energy Conversion, 
									Vol.  32, no. 4, pp. 1-10, Dec. 2017 
									
									
									  
									
									 • A 
									Daniar, Z Nasiri-Gheidari, F Tootoonchian, “Position 
									Error Calculation of Linear Resolver under 
									Mechanical Fault Conditions”, IET 
									Science, Measurement & Technology, 
									vol. 11, no. 7, pp. 948-954, 2017 
									  
									
									 • 
									 
									H. Saneie, 
									Z. Nasiri-Gheidari, F. Tootoonchian, “An 
									Analytical Model for Performance Prediction 
									of Linear 
									Resolver”, IET 
									Electric Power Applications, vol. 11, 
									no. 8, pp. 1457-1465, Sep. 2017
									
								• 
								R. Alipour-Sarabi, Z. 
									Nasiri-Gheidari, F. Tootoonchian, and H. 
									Oraee, “Analysis of Winding Configurations 
									and 
									Slot-Pole Combinations in Fractional-Slots 
									Resolvers”, IEEE Sensors Journal, 
								
								
								Vol. 17, no. 14, pp. 4420-4428, July 2017 
								• 
								Z. Nasiri-Gheidari, 
								R. Alipour-Sarabi, F. Tootoonchian, and F. Zare, 
								“Performance Evaluation of Disk Type Variable 
								Reluctance Resolvers”, IEEE Sensors Journal, 
								Vol. 17, no. 13, pp. 4037-4045, July 2017 
								  
								• 
								Z. Nasiri-Gheidari, F. Tootoonchian, “The 
								Influence of Mechanical Faults on the Position 
								Error of an Axial Flux Brushless Resolver 
								without Rotor Windings”, IET Electric Power 
								Applications, 
								Vol. 11, no. 4, pp. 613-621, 2017 
								  
								• 
								R. Alipour-Sarabi, Z. Nasiri-Gheidari, F. 
								Tootoonchian, and H. Oraee, “Effects of Physical 
								Parameters on the Accuracy of Axial Flux 
								Resolvers”, IEEE Transactions on Magnetics, Vol. 
								53, no. 4, pp. 1-11, April 2017, DOI: 
								10.1109/TMAG.2016.2645163 
								  
									
									
								
								•
								
								
								  Z. 
									Nasiri-Gheidari, “Design, Analysis, and 
									Prototyping of a New Wound-Rotor Axial Flux 
									Brushless Resolver”, IEEE Transaction on 
									Energy Conversion, Vol. 32, no. 1, pp. 
									276 - 283, 2017, DOI: 
									10.1109/TEC.2016.2604858 
								
								•
								
								
								 Z. 
								Nasiri-Gheidari, F. Tootoonchian, and F. Zare 
								“Design Oriented Technique for Mitigating 
								Position Error Due To Shaft Run-out in 
								Sinusoidal-Rotor Variable Reluctance Resolvers,” 
								IET Electric Power Applications, vol. 11, no. 1, 
								pp. 132 – 141, 2017, DOI: 
								10.1049/iet-epa.2016.0316 
								  
								
								•
								
								
								 F. 
								Tootoonchian, Z. Nasiri-Gheidari, “Twelve-slot 
								Two-Saliency Variable Reluctance Resolver with 
								Nonoverlapping Signal Windings and Axial Flux 
								Excitation”, IET Electric Power Applications, 
								Vol. 11, no. 1, pp. 49 – 62, 2017, DOI: 
								10.1049/iet-epa.2016.0252 
								  
								
								•
								
								
								F. Tootoonchian,
								
								Z. Nasiri-Gheidari, 
								“Cogging force mitigation techniques in a 
								modular linear permanent magnet motor”, IET 
								Electric Power Applications, Vol. 10, no. 7,8, 
								pp. 667-674, 2016 
								
								   
								
								• 
								F. Tootoonchian, Z. Nasiri-Gheidari, H. Lesani, 
								“Design, analysis, and implementation of extra 
								low air-gap single-phase axial-flux induction 
								motors for low-cost applications”, Int. Trans. 
								Electr. Energ. Syst., Vol. 26, no. 12, pp. 
								2516-2531,December 2016, DOI: 10.1002/etep.2217 
								
								  
								
								•
								
								Z. Nasiri-Gheidari, 
								F. Tootoonchian, “Electromagnetic Design 
								Optimization of a Modular Linear Flux-Reversal 
								Motor”, Electric Power Component and System, 
								Vol. 44, no. 18, pp. 2112-2120, Oct 2016  
								   
								
								• M.H. Ravanji, Z. Nasiri-Gheidari, "Design 
								optimization of a ladder secondary single-sided 
								linear induction motor for improved 
								performance", IEEE Transaction on Energy 
								Conversion, Vol.30 , no. 4 , 12 August 2015, pp. 
								1595 – 1603
 • Z. Nasiri-Gheidari, F. Tootoonchian, “Axial 
								flux resolver design techniques for minimizing 
								position error due to static eccentricities”, 
								IEEE Sensors Journal, vol. 15, Issue 7, pp. 4027 - 4034, 
								July 2015.
  
								   
								• Z. Nasiri-Gheidari, H. Lesani, “Optimal Design 
								of Adjustable Air-gap Two-speed Capacitor-run 
								Single phase Axial-flux Induction Motor”, IEEE 
								Transaction on Energy Conversion, vol. 28, Issue 
								3, pp. 543 - 552, Sept. 2013 .
 • Z. Nasiri-Gheidari, H. Lesani, “New Design 
								Solution for Static Eccentricity in Single 
								Stator-Single Rotor Axial Flux Induction 
								Motors”, IET Electric Power Applications, Vol. 7 
								, Issue 6, July 2013
 
 • Z. Nasiri-Gheidari, H. Lesani, “Investigation 
								of Characteristics of a Single-Phase Axial Flux 
								Induction Motor Using 3D FEM and d-q Model”, IET 
								Electric Power Applications, Vol. 7 , Issue 1, pp. 47 – 57, 
								Jan. 2013
 
 • C. Lucas, Z. Nasiri Gheidari, F. Tootoonchian, 
								“Application of an Imperialist Competitive 
								Algorithm to the Design of a Linear Induction 
								Motor”, Energy Conversion and Management, vol. 
								51, pp. 1407-1411, January 2010
 
 • Z. Nasiri-Gheidari, H. Lesani, “Using Stator 
								Discharge Current for the Parameter Estimation 
								of a Single-Phase Axial Flux Induction Motor” 
								Scientia Iranica, Transactions D - Electrical 
								Engineering, Vol. 19, Issue 6, 
								pp. 1794–1801, December 2012.
 
 • Z. Nasiri-Gheidari, H. Lesani, “A Survey on 
								Axial Flux Induction Motors”, PRZEGLĄD 
								ELEKTROTECHNICZNY (Electrical Review), ISSN 
								0033-2097, Vol. 88, no. 2, pp. 300-305, 2012
 
 • Z. Nasiri-Gheidari, H. Lesani, “Design 
								Optimization of a Single-Phase Axial Flux 
								Induction Motor with Low Torque Ripple”, 
								PRZEGLĄD ELEKTROTECHNICZNY (Electrical Review), 
								ISSN 0033-2097, Vol. 88, no. 3b, pp. 
								168-172, 2012
 
 • H. Lesani, A. Darabi, Z. Nasiri Gheidari, F. 
								Tootoonchian, “Very fast field oriented control 
								for permanent magnet hysteresis synchronous 
								motor”, Iranian Journal of Electrical & 
								Electronic Engineering, Vol. 2, No. 1,pp. 34-40, 
								January 2006.
 
 • D. A. Khaburi, F. Tootoonchian and Z. 
								Nasiri-Gheidari, “Parameter Identification of a 
								Brushless Resolver Using Discharge Response of 
								Stator Current”, Iranian Journal of Electrical & 
								Electronic Engineering, Vol. 3, No. 1 &2, pp. 
								42-52, Jan. 2007.
 
 • Z. Nasiri-Gheidari, H. Lesani and F. 
								Tootoonchian, “A New Hunting Control Method for 
								Permanent Magnet Hysteresis Motors”, Iranian 
								Journal of Electrical & Electronic Engineering, 
								Vol. 2, No. 3 &4, pp. 121-130, July 2006.
 
 • D. A. Khaburi, F. Tootoonchian and Z. 
								Nasiri-Gheidari, “Dynamic Performance Prediction 
								of Brushless Resolver”, Iranian Journal of 
								Electrical & Electronic Engineering, Vol. 4, No. 
								3,pp. 94-103, July 2008.
 
 • C. Lucas, F. Tootoonchian, Z. Nasiri-Gheidari, 
								"Multi-Objective Design Optimization of a Linear 
								Brushless Permanent Magnet Motor Using Particle 
								Swarm Optimization (PSO)", Iranian Journal of 
								Electrical & Electronic Engineering, vol. 6, no. 
								3, pp. 183–189, September 2010.
 
 • C. Lucas, Z. Nasiri-Gheidari, F. Tootoonchian, 
								"Using Modular Pole for Multi-objective Design 
								Optimization of a Linear Permanent Magnet 
								Synchronous Motor by Particle Swarm Optimization 
								(PSO)", Iranian Journal of Electrical & 
								Electronic Engineering, Vol. 6, No. 4, pp. 
								214-223, Dec. 2010.
  
								   
								• Z. Nasiri-Gheidari, H. Lesani, F. 
								Tootoonchian, “Performance Prediction of a 
								Single-Phase Capacitor-Run Axial Flux Induction 
								Motor under Static Eccentricity”, Australian 
								Journal of Electrical & Electronics Engineering, 
								vol. 11, no. 1, pp. 93, 2014
 • Z. Nasiri-Gheidari, H. Lesani, “Theoretical 
								Modeling of Axial Flux Squirrel Cage Induction 
								Motor Considering both Saturation and 
								Anisotropy”, European Transactions on Electrical 
								Power ( International Transactions on Electrical 
								Energy Systems), vol. 24, no. 3, pp. 335-346, 2014
 
  
								• زهرا نصيري قيداري، حميد لساني، احمد دارابي، 
								فريد توتونچيان، " کنترل برداری موتور هيسترزيس 
								سنکرون سه فاز با تفکیک متغیرهای d وq"، فصلنامه 
								فناوری و آموزش، سال اول، جلد اول، شماره 4، صص 175 تا
								 188، تابستان 1386
 • زهرا نصيري قيداري، حميد لساني، احمد دارابي، 
								فريد توتونچيان، " تحلیل ديناميکي موتور هيسترزيس 
								سنکرون آهنربای دائم با در نظر گرفتن اثر فوکو"، 
								فصلنامه فناوری و آموزش، سال دوم، جلد دوم، شماره 
								1، صص 27 تا 36، پاییز 1386.
 
 • حميد لساني، زهرا نصيري قيداري، فريد توتونچيان، 
								"یک روش جدید برای دینامومتری موتورهای القایی 
								تکفاز"، فصلنامه علمی پژوهشی انجمن مهندسی برق 
								ایران، سال پنجم، شماره اول، صص 68 تا 79 ، بهار و تابستان 
								1387
  
								   
								 • 
								
								زهرا نصيري قيداري، "
								
								
								بررسي تأثير شار نشتي ترانسفورماتور گردان روي 
								موقعيت خروجي ريزالورهاي بدون جاروبک شار محوري"،
								
								
								مجله مهندسی برق دانشگاه تبریز، دوره 47، شماره 2، 
								تابستان 1396، 
								
								صص 
								741-749  
								  
								 ا. 
								پایمزد، ح. صانعی و ز. نصیری قیداری، " مدل سازی 
								ریزالور خطی با در نظر گرفتن اثر انتهایی طولی "، 
								مجله علمی پژوهشی الکترومغناطیس کاربردی، مهر ماه
								
								
								99  
								   
								
							
 
                         
                                
                                    
									
									Conference 
									Papers: 
									  
									
									•  M. R. Eesazadeh and Z. 
									Nasiri-Gheidari, "A Fast and Accurate 
									Analytical Model for Performance Calculation 
									of WR Synchros Based on Field Reconstruction 
									Method," 2024 4th International Conference 
									on Electrical Machines and Drives (ICEMD), 
									Tehran, Iran, Islamic Republic of, 2024, pp. 
									1-6, doi: 10.1109/ICEMD64575.2024.10963647. 
									
									•  A. Zibarzani and Z. N. Gheidari, 
									"Effect of Slot and Pole Combination on the 
									Efficiency of a Permanent Magnet BLDC 
									Motor," 2024 4th International Conference on 
									Electrical Machines and Drives (ICEMD), 
									Tehran, Iran, Islamic Republic of, 2024, pp. 
									1-5, doi: 10.1109/ICEMD64575.2024.10963509. 
									
									•  S. Hajmohammadi and Z. 
									Nasiri-Gheidari, "Winding Selection for 
									Wound-Rotor Printed Circuit Board Resolver," 2024 
									4th International Conference on Electrical 
									Machines and Drives (ICEMD), Tehran, Iran, 
									Islamic Republic of, 2024, pp. 1-6, doi: 
									10.1109/ICEMD64575.2024.10963575. 
									
									•   R. Gholizadeh-Miankoh, Z. 
									Nasiri-Gheidari, F. Tootoonchian and H. 
									Oraee, "Performance Evaluation of Variable 
									Reluctance Linear Resolver Based on the 
									Hybrid Model Across a Wide Velocity 
									Range," 2024 4th International Conference on 
									Electrical Machines and Drives (ICEMD), 
									Tehran, Iran, Islamic Republic of, 2024, pp. 
									1-7, doi: 10.1109/ICEMD64575.2024.10963653. 
									
									•  M. A. Razavi, F. Tootoonchian and Z. 
									Nasiri-Gheidari, "Investigating the Impact 
									of the Rotary Transformer’s Leakage Flux on 
									the Accuracy of Brushless Synchros," 2024 
									4th International Conference on Electrical 
									Machines and Drives (ICEMD), Tehran, Iran, 
									Islamic Republic of, 2024, pp. 1-6, doi: 
									10.1109/ICEMD64575.2024.10963380. 
									  
									
									•  
									
									M. Nikzad and Z. Nasiri-Gheidari, 
									"Resolution Improvement of Hall Effect Gear 
									Tooth Magnetic Encoder," 2023 3rd 
									International Conference on Electrical 
									Machines and Drives (ICEMD), Tehran, Iran, 
									Islamic Republic of, 2023, pp. 1-5, doi: 
									10.1109/ICEMD60816.2023.10429119. 
									  
									.•  
									M. Soleimani, S. Hajmohammadi, Z. 
									Nasiri-Gheidari, D. Hemati and H. Oraee, 
									"Performance Analysis of the Outer Rotor 
									Variable Reluctance Resolver," 2023 3rd 
									International Conference on Electrical 
									Machines and Drives (ICEMD), Tehran, Iran, 
									Islamic Republic of, 2023, pp. 1-5, doi: 
									10.1109/ICEMD60816.2023.10429638. 
									  
									.•  
									M. R. Eesazadeh and Z. Nasiri-Gheidari, " 
									Proposal of Winding Arrangements for the WR 
									Synchros to Facilitate the 3-phase to 
									2-phase Conversion without Scott-T 
									Transformer," 2024 15th Power Electronics, 
									Drive Systems, and Technologies Conference (PEDSTC), 
									Tehran, Iran, Islamic Republic of, 2024, pp. 
									1-6 
									  
									
									•  H. Lasjerdi and Z. Nasiri-Gheidari, 
									"Fault Detection in Variable Air-gap 
									Resolver," 2023 14th Power Electronics, 
									Drive Systems, and Technologies Conference (PEDSTC), 
									Babol, Iran, Islamic Republic of, 2023, pp. 
									1-6, doi: 10.1109/PEDSTC57673.2023.10087148.   
									
									•  M. Nikzad, Z. Nasiri-Gheidari, “Hall 
									Effect Gear Tooth Magnetic Encoder”, The 
									Second International Conference on 
									Electrical Motors and Generators –ICEMG 
									2023, 1-2 March, 2023, Sabzevar, Iran. 
									  
									
									 •   M. KhajueeZadeh, M. 
									Emadaleslami and Z. Nasiri-Gheidari, "A 
									High-Accuracy Two-Stage Deep Learning-Based 
									Resolver to Digital Converter," 2022 13th 
									Power Electronics, Drive Systems, and 
									Technologies Conference (PEDSTC), 2022, pp. 
									71-75, doi: 
									10.1109/PEDSTC53976.2022.9767427.   
									
									 •  S. Samareh-TaheriNasab, M. 
									KhajueeZadeh, Z. Nasiri-Gheidari and S. 
									Sheikhaei, "A Low-Cost Linearized Analog 
									Resolver-To-DC Converter," 2022 30th 
									International Conference on Electrical 
									Engineering (ICEE), 2022, pp. 619-623, doi: 
									10.1109/ICEE55646.2022.9827090  
									 
									  
									
									 •  F. Zare, Z. Nasiri-Gheidari, and A. Daniar, 
									“A Reliable Integrated Resolver for High 
									Precision Radial-Linear Position 
									Measurement”, IEEE SDEMPED 2021, USA, 2021 
									  
									
									•     G. Rezazadeh, F. Tahami, G. Capolino, 
									Z. Nasiri-Gheidari, H. Henao, A. Yazidi, M. 
									Sahebazamani, “Design 
									of a Six-Phase Squirrel Cage Induction Motor 
									with Pseudo-Concentrated Windings”, 2020 
									International Conference on Electrical 
									Machines (ICEM), pp. 2097-2103, 23-26 Aug. 
									2020   
									
									•     H. Lasjerdi, Z. Nasiri-Gheidari, and 
									F. Tootoonchian “Condition Monitoring of 
									Wound Rotor Resolvers”, 28th Iranian 
									Conference on Electrical Engineering (ICEE), 
									2020, Tabriz, Iran 
									
									  
									
									•   M.S. KjajueeZadeh, Z. Nasiri-Gheidari, 
									and F. Tootoonchian “Study of Noise and 
									Vibration in Wound Rotor Resolvers”, 28th 
									Iranian Conference on Electrical Engineering 
									(ICEE), 2020, Tabriz, Iran 
									  
									
									• ف. 
									زارع، ز. نصيری قیداری، ف. توتونچيان، " بررسی 
									تاثیر تعداد قطب و نوع سیمپیچی بر عملکرد 
									ریزالور رلوکتانس متغیر رتور سینوسی "، اولين 
									کنفرانس بین المللی موتورها و ژنراتورهای 
									الکتريکی، سبزه وار، ايران 
									  
									 •  
									H. Lasjerdi, Z. Nasiri-Gheidari, and F. 
									Tootoonchian “Proposal of an Analytical 
									Model for Performance Evaluation of WR-Resolvers 
									under Short Circuit Fault”, 27th Iranian 
									Conference on Electrical Engineering (ICEE), 
									2019, Yazd, Iran, (selected as the Best 
									paper of conference)   
									 • 
									A. Farhadi-Biranvand, R. Alipour-Sarabi, Z. 
									Nasiri-Gheidari, and F. Tootoonchian, 
									“Selection of Excitation Signal Waveform for 
									Improved Performance of Wound-Rotor 
									Resolver”, PEDSTC 2019, Shiraz, Iran 
									
									  
									 • 
									S. Hajmohammadi, R. Alipour-Sarabi, Z. 
									Nasiri-Gheidari, and F. Tootoonchian, 
									“Design Considerations of Multi-Turn 
									Wound-Rotor Resolvers”, PEDSTC 2019, Shiraz, 
									Iran   
									 •
									G. Rezazadeh, S. Vaschetto, F. Tahami, GA. 
									Capolino, H. Henao, Z. Nasiri-Gheidari, 
									“Analysis of Six-Phase Induction Motor with 
									Distributed and Concentrated Windings by 
									Using the Winding Function Method” 2018 XIII 
									International Conference on Electrical 
									Machines (ICEM), pp. 2423-2429, 2018 
									  
									
									 • 
									M. Bahari, Z. Nasiri-Gheidari, “Longitudinal 
									End Effect in a Variable Area Linear 
									Resolver and its Compensating Methods”, 26th 
									Iranian Conference on Electrical Engineering 
									(ICEE), 2018, Mashhad, Iran 
									  
									
									 • 
									
									
									M. Ghods, Z. Nasiri-Gheidari, F. 
									Tootoonchian and A. Oraee, “Performance 
									Evaluation of Permanent Magnet Vernier 
									Generator Based on Modified Winding Function 
									Method”, 26th Iranian Conference on 
									Electrical Engineering (ICEE), 2018, 
									Mashhad, Iran 
									  
									
									 • 
									R. Alipour-Sarabi, Z. Nasiri-Gheidari, F. 
									Tootoonchian and A. Oraee, F. Zare, 
									“Linearized Resolver”, 26th Iranian 
									Conference on Electrical Engineering (ICEE), 
									2018, Mashhad, Iran, 
									 
									  
									
									 • 
									F. Abolqasemi Kharanaq, Z. Nasiri-Gheidari, 
									and F. Tootoonchian, “Analysis of Winding 
									Arrangement on Position Error of Axial Flux 
									Wound-Rotor Resolver”, PEDSTC 2018, Tehran, 
									Iran 
									  
									
									 • 
									G. Rezazadeh, M.Ghasemian, and Z. 
									Nasiri-Gheidari, “Ultra Low Vibration and 
									Low Acoustic Noise Multi-Stage Switched 
									Reluctance Machine”, PEDSTC 2018, Tehran, 
									Iran 
									  
									
									 •A. 
									Mradnouri, P. Elhamnia, M. Vakilian and Z. 
									Nasiri-Gheidari, “Comparison of Short 
									Circuit Force of a Symmetric Core versus a 
									Core Type 3-phaseTransformer”, PSC 2017, 
									Tehran, Iran 
									  
									
									 • 
									H. Saneie, Z. Nasiri-Gheidari, F. 
									Tootoonchian, “The influence of Winding’s 
									Pole Pairs on Position Error of Linear 
									Resolvers”, 25th Iranian Conference on 
									Electrical Engineering (ICEE), 2017, Tehran, 
									Iran 
									 
									  
									
									• 
									A. Daniar, Z. Nasiri-Gheidari, “The 
									Influence of Different Configurations on 
									Position Error of Linear Variable Reluctance 
									Resolvers”, 25th Iranian Conference on 
									Electrical Engineering (ICEE), 2017, Tehran, 
									Iran 
									  
									•   
									س. اميرزاده، م. رعيتی، ز. نصيری قيداری، ع. 
									رنجبر، " طراحی و کنترل کنندهی ثالثيه فرکانس 
									در سيستمهای قدرت با نفوذ بالای نيروگاه بادی 
									در حضور مکانيزم بازار پويا"، 25 امين کنفرانس 
									مهندسی برق ايران 
									  
									
									    • 
									Z. Nasiri-Gheidari, 
									F. Tootoonchian, “An Optimized Axial Flux 
									Variable Reluctance Resolver with Concentric 
									Windings”, 24th Iranian Conference on 
									Electrical Engineering (ICEE), 2016, Shiraz, 
									Iran, pp. 1284 - 1290, DOI: 
									10.1109/IranianCEE.2016.7585719 
									
									
									  
									• 
									J. Faiz, Z. Nasiri-Gheidari, M. Azizur 
									Rahman, “Performance Verification of 
									Saturated IPM Bearingless Motors Considering 
									Magnetic Pull Variation”, 17th IEEE-PEMC 
									conference, 25-30 Sep. 2016, Varna, Bulgaria 
									  
									• زهرا نصیری قیداری،" چگونه يك تلسكوپ 
									بسازيم"؛ كنفرانس دانش آموزي فيزيك ايران، 
									مرداد ماه 1376، اصفهان، (برنده لوح تقدیر 
									کنفرانس).
 • زهرا نصیری قیداری،" چگونه يك عدسي كاو 
									بسازيم"؛ كنفرانس دانش آموزي فيزيك ايران، 
									مرداد ماه 1377، كرمان، (برنده لوح تقدیر 
									کنفرانس)
 
									
 
									• S.Vaez-zadeh, Z. Nasiri-Gheidari, F. 
									Tootoonchian “Vector Control of IPM motor 
									with Maximum torque and efficiency”, 
									proceeding of 14th Iranian Conference on 
									Electrical Engineering, Amirkabir Univ. of 
									Tech., Tehran, Iran, 16-18 May, 2006.
 • H.Lesani, A. Darabi, Z.Nasiri Gheidari, 
									“Dynamic Performance Prediction of Poly 
									phase Hysteresis Motors With Considering 
									Eddy Current Effect”, 3rd International 
									Conference on “Technical and Physical 
									Problems in Power Engineering” (TPE-2006), 
									Gazi University, Ankara, TURKEY, pp. 138-142 
									, May 29-31, 2006.
 
 • H.Lesani, A. Darabi, Z.Nasiri Gheidari, “ 
									Starting & Synchronizing Of Conventional 
									Hysteresis Motors With Comparison of 
									Permanent Magnet Hysteresis Motors”, 3rd 
									International Conference on “Technical and 
									Physical Problems in Power Engineering” 
									(TPE-2006), Gazi University, Ankara, TURKEY, 
									pp. 222-226, May 29-31, 2006.
 
 • H.Lesani, Z.Nasiri Gheidari, F. 
									Tootoonchian “A Novel P.C. Base 
									Electromotor’s Dynamometery”, 3rd 
									International Conference on “Technical and 
									Physical Problems in Power Engineering” 
									(TPE-2006), Gazi University, Ankara, TURKEY, 
									pp. 222-226, May 29-31, 2006.
 
 • Z.Nasiri Gheidari , H. Lesani, A. Darabi, 
									“A Novel Optimized Eigenvalue Based Three 
									Phase Hysteresis Motors Hunting Control”, 
									IPEC conference, Philadelphia University, 
									Jordan, 19-21 September 2006.
 
									
 
									• زهرا نصيري قيداري، حميد لساني، احمد 
									دارابي، فريد توتونچيان، " مدل سازي ديناميکي 
									موتور هيسترزيس سنکرون با در نظر گرفتن اثر 
									فوکو"، ایران، همایش تخصصی کاربردی سامانه های 
									ناوبری NSRC2006، دی ماه 1385.
 • فريد توتونچيان، زهرا نصيري قيداري، " تعیین 
									زاویه بهینه پره های توربین بادی براساس 
									جايابي بهينه مقادير ویژه ژنراتور القایی"، 
									بیست و دومین کنفرانس بین المللی برق، 28 تا 
									30 آبان ماه سال 1386.
 
 • سعید افشارنیا، زهرا نصیری قیداری، " يک روش 
									ترکيبي جديد برای جبران بار در سيستم سه فاز 
									چهار سيمه در شرايط مختلف ولتاژ تغذيه"، 
									مجموعه مقالات هفدهمین کنفرانس مهندسی برق 
									ایران (ICEE2009)، دانشگاه علم وصنعت ایران، 
									جلد دوم، قدرت – سیستم، 22-24 اردیبهشت 1388، 
									صص. 557-563
 
 • امیرعباس شایگانی اکمل، زهرا نصیری قیداری، 
									" مطالعه مروري اندازه گيري تخليه جزئي"، 
									مجموعه مقالات هفدهمین کنفرانس مهندسی برق 
									ایران (ICEE2009)، دانشگاه علم وصنعت ایران، 
									جلد دوم، قدرت – سیستم، 22-24 اردیبهشت 1388، 
									صص. 213-218
 
									  
									• 
									فرید توتونچیان، زهرا نصیری قیداری، " تشخيص 
									خطاي ناهم محوري و اتصال كوتاه در ژنراتور 
									سنكرون در كاربرد همزمان آن به عنوان سنسور 
									موقعيت زاويه اي"، سی امین کنفرانس بین المللی 
									برق، 11 تا 13 آبان ماه سال 1394، تهران، 
									ایران 
									
									
									  
									
									   
  
                     
                                
                                    
									Patents:
									•  زهرا نصیری قیداری ،فرید توتونچیان، « 
									ریزالور دیسکی با رتور سیم پیچی شده با حذف 
									هسته ترانسفورماتور گردان»، اسفند 1394. 
									• فرید توتونچیان، زهرا نصیری قیداری، « 
									ریزالور شار محوری با رتور بدون سیم پیچی»،  
									اسفند 1394. 
									• فرید توتونچیان، زهرا نصیری قیداری، « سیستم 
									انتقال گشتاور بدون تماس»، مهرماه 1385. |