Reza Alizadeh
Assistant professor of Materials Science and Engineering
Publications Research group Updated at:  October 25,2021

 

Google Scholar Link:

https://scholar.google.com/citations?hl=en&user=LLLQNXoAAAAJ&view_op=list_works

 

ISI papers

1. E. Gerashi, R. Alizadeh, T.G. Langdon, Effect of crystallographic texture and twinning on the corrosion behavior of Mg alloys: A review, Journal of Magnesium and Alloys, 2021, https://doi.org/10.1016/j.jma.2021.09.009.

2. R. Alizadeh, J. Wang, J. LLorca, Precipitate strengthening of pyramidal slip in Mg-Zn alloys, Materials Science and Engineering A, 2021.

3. G. Esteban-Manzanares, R. Alizadeh, I. Papadimitriou, D. Dickel, C.D. Barrett, J. LLorca, Atomistic simulations of the interaction of basal dislocations with MgZn2 precipitates in Mg alloys, Materials Science and Engineering A, 2020, Vol. 788, pp. 13955.

4. R. Alizadeh, J. Llorca, Interactions between basal dislocations and  precipitates in Mg-4Zn alloy: Mechanisms and strengthening, Acta Materialia, 2020, Vol. 186, pp. 475-486.

5. R. Alizadeh, M. Peña-Ortega, T.R. Bieler, J. Llorca, A criterion for slip transfer at grain boundaries in Al, Scripta Materialia, 2020, Vol. 178, pp. 408-412.

6. S. Haouala, R. Alizadeh, T.R. Bieler, J. Segurado, J. LLorca, Effect of slip transmission at grain boundaries in Al bicrystals, International Journal of Plasticity, 2019, https://doi.org/10.1016/j.ijplas.2019.09.006.

7. J.-Y. Wang, N. Li. R. Alizadeh, M.A. Monclús, Y.W. Cuic, J.M. Molina-Aldareguía, J. LLorca, Effect of solute content and temperature on the deformation mechanisms and critical resolved shear stress in Mg-Al and Mg-Zn alloys, Acta Materialia, 2019, V. 170, pp. 155-165.

8. T.R. Bieler, R. Alizadeh, M. Peña-Ortega, J. LLorca, An analysis of (the lack of) slip transfer between near-cube oriented grains in pure Al, International Journal of Plasticity, 2019, Vol. 118, pp. 269-290.

9. M.J. Esfandyarpour, R. Alizadeh, R. Mahmudi, Applicability of shear punch testing to the evaluation of hot tensile deformation parameters and constitutive analyses, Journal of Materials Research and Technology, 2019, Vol. 8, pp. 996-1002.

10. S.A. Torbati-Sarrafa, Reza Alizadeh, R. Mahmudi, T.G. Langdon, “Evaluating the flow properties of a magnesium ZK60 alloy processed by high-pressure torsion: a comparison of two different miniature testing techniques”, Materials Science and Engineering A, 2017, Vol. 708, pp. 432-439.

11. A. Movahedi-Rad, R. Alizadeh, “Dependence of strain rate sensitivity on the slip system: A molecular dynamics simulation”, Journal of Materials Engineering and Performance, 2017, Vol. 26, pp.  5173-5179.

12. R. Alizadeh, R. Mahmudi, O.A. Ruano, A.H.W. Ngan, “Constitutive analysis and hot deformation behavior of fine-grained Mg-Gd-Y-Zr alloys”, Metallurgical and Materials Transactions A, 2017, Vol. 48, pp. 5699-5709.

13. R. Alizadeh, R. Mahmudi, A.H.W. Ngan, T.G. Langdon, “Microstructural evolution during hot shear deformation of an extruded fine-grained Mg-Gd-Y-Zr alloy”, Journal of Materials Science, 2017, Vol. 52, pp. 7843-7857.

14. R. Alizadeh, R. Mahmudi, P.H.R. Pereira, Y. Huang, T.G. Langdon, “Microstructural evolution and superplasticity in an Mg-Gd-Y-Zr alloy after processing by different SPD techniques”, Materials Science & Engineering A, 2017, Vol. 682, pp. 577-585.

15. R. Alizadeh, R. Mahmudi, A.H.W. Ngan, Y. Huang, T.G. Langdon, “Microstructure, texture and superplasticity of a fine-grained Mg-Gd-Zr alloy processed by equal channel angular pressing”, Metallurgical and Materials Transactions A, 2016, Vol. 47A, pp. 6056-6069.

16. R. Alizadeh, R. Mahmudi, A.H.W. Ngan, T. G. Langdon, “An unusual extrusion texture in Mg-Gd-Y-Zr alloys”, Advanced Engineering Materials, 2016,Vol. 18 (6), pp. 1044-1049.

17. R. Alizadeh, R. Mahmudi, A.H.W. Ngan, Y. Huang, T. G. Langdon, “Superplasticity of a nano-grained Mg-Gd-Y-Zr alloy processed by high-pressure torsion”, Materials Science and Engineering A, 2016, Vol. 651, pp. 786-794.

18. R. Alizadeh, R. Mahmudi, A.H.W. Ngan, T.G. Langdon, “Microstructural stability and grain growth kinetics in an extruded fine-grained Mg-Gd-Y-Zr alloy”, Journal of Materials Science, 2015, Vol. 50, pp. 4940-4951.

19. H.R. JafariNodooshan, Wencai Liu, Guohua Wu, R. Alizadeh, R. Mahmudi, Wenjiang Ding, “Microstructure characterization and high-temperature shear strength of the Mg-10Gd-3Y-1.2Zn-0.5Zr alloy in the as-cast and aged conditions”, Journal of Alloys and Compounds, 2015, Vol. 619, pp. 826-833.

20. R.  Alizadeh, R.  Mahmudi, T.G. Langdon, “Superplasticity of a fine-grained Mg-9Gd-4Y-0.4Zr alloy evaluated using shear punch testing”, Journal of Materials Research and Technology, 2014, Vol. 3(3), pp. 228-232.

21. R. Alizadeh, R.  Mahmudi, “Microstructural Characterization and High‐Temperature Mechanical Behavior of Cast Mg-4Zn-xSi Alloys”, Advanced Engineering Materials, 2014, Vol. 16, pp. 1160-1166.

22. R. Mahmudi, R. Alizadeh, Sh. Azhari, “Strain rate sensitivity of equal-channel angularly pressed Sn-5Sb alloy determined by shear punch test”, Materials Letters, 2013, Vol. 97, pp. 44-46.

23. R.  Alizadeh, R.  Mahmudi, T.G. Langdon, “Creep mechanisms in an Mg-4Zn alloy in the as-cast and aged conditions”, Materials Science and Engineering A, 2013, Vol. 546, pp. 423-430.

24. R. Alizadeh, F. Rashchi, E. Vahidi, “Recovery of zinc from leach residues with minimum iron dissolution using oxidative leaching”, Waste Management & Research, 2011, Vol. 29(2), pp. 165-171.

25. R. Alizadeh, R. Mahmudi, “Effects of Sb addition on the modification of Mg2Si particles and high-temperature mechanical properties of cast Mg-4Zn-2Si alloy”, Journal of alloys and compounds, 2011, Vol. 509, pp. 9195-9199.

26. R. Mahmudi, R. Alizadeh, A.R. Geranmayeh, “Enhanced superplasticity in equal-channel angularly pressed Sn-5Sb alloy”, Scripta Materialia, 2011, Vol. 64, pp. 521-524.

27. R. Alizadeh, R. Mahmudi, M.J. Esfandyarpour, “Shear punch creep test: A novel localized method for evaluating creep properties”, Scripta Materialia, 2011, Vol. 64, pp. 442-445.

28. R.  Alizadeh, R.  Mahmudi, “Effect of Sb additions on the microstructural stability and mechanical properties of cast Mg-4Zn alloy”, Materials Science and Engineering A, 2010, Vol. 527, pp. 5312-5317.

29. R. Alizadeh, R. Mahmudi, “Evaluating high-temperature mechanical behavior of cast Mg-4Zn-xSb magnesium alloys by shear punch testing”, Materials Science and Engineering A, 2010, Vol. 527, pp. 3975-3983.

 

  

International papers

1. Sh. Molaei, R. Alizadeh, M. Attarian, Y. Jaferian, A failure analysis study on the fractured connecting bolts of a filter press, Case Studies in Engineering Failure Analysis, 2015, Vol. 4, pp. 26-38.

2. A. Movahedi-Rad, R. Alizadeh, Simulating Grain Boundary Energy Using Molecular Dynamics, Journal of Modern Physics, 2014, Vol. 5, pp. 627-632.

 

International conferences

1.      T.R. Bieler, H. Phukan, Y. Su, C. Edge, M. Pen~a-Ortega, R. Alizadeh, S. Haouala, M.A. Crimp, P. Eisenlohr, C.J. Boehlert, J. Molina, J. Seguardo, J. Llorca, Comparison between experiments and modeling for slip transfer across grain boundaries, Materials Science and Technology (MS&T), September 2019, Oregano, USA. (Oral presentation)

2.      R. Alizadeh, T. Bieler, J. Llorca, Slip transfer at grain boundaries in pure Al, TMS, March 2019, USA. (Oral presentation)

3.      N. Li, J. Wang, R. Alizadeh, J. Llorca and J.M. Molina-Aldareguia, High-throughput investigation of strength and creep in Mg alloys through micromechanical testing, TMS, March 2019, USA. (Oral presentation)

4.      R. Alizadeh, J. Llorca, "Effect of precipitates on the critical resolved shear stress for basal slip in Mg-4 (wt. %) Zn alloy", SES, October 2018, Madrid, Spain. (Oral presentation)

5.      R. Alizadeh, S. Haouala, T. Bieler, J. Segurado, J. Molina-Aldareguia, J. Llorca, "Slip transfer at grain boundaries in Al: experimental analysis and numerical simulations", ESMC, July 2018, Bologna, Italy. (Oral presentation)

6.      A. Movahedi-Rad, R. Alizadeh, "Molecular dynamics simulation of the grain boundary energy", UFGNSM, 2013, Tehran, Iran. (Poster)

7.      R. Alizadeh, R. Mahmudi, T.G. Langdon, "Superplasticity of a fine-grained Mg-9Gd-4Y-0.4Zr alloy assessed using shear punch testing", UFGNSM, 2013, Tehran, Iran. (Oral presentation)

8.      R. Mahmudi, R. Alizadeh, Sh. Azhari, "Strain rate sensitivity of equal-channel angularly pressed Sn-5Sb alloy determined by shear punch test", UFGNSM, 2011, Tehran, Iran. (Oral presentation)

9.      R. Alizadeh, E. Vahidi, F. Rashchi, "Leaching optimization for using solvent extraction to recover zinc from zinc leach residues", Environmental and water resources, Thailand, 2009. (Oral presentation)

10.  R. Mahmudi, R. Alizadeh, A.R. Geranmayeh, Enhanced superplasticity in equal channel angularly pressed Sn-5Sb alloy, UFGNSM, 2009, Tehran, Iran. (Poster)

 

* The presenting authors are underlined.

 

Organization of international conferences

1.      SES, 2018, Madrid, Spain.