Journal papers

1- M. Askari, A. M. Cameron, J. Oakley," The determination of surface tension at elevated temperature by drop image analysis", High Temperature Technology, Vol 8, No 3, 1990, p. 201.

2- M. Askari, K. Ghanbari Ahari, A. M. Cameron," The surface tension of some sodium borosilicate glasses", Physical Chemistry of glasses, Vol 32, 1991, p. 32.

3- M. Askari, A. M. Cameron "Surface tension of some CaO-MgO-Al2O3++-SiO2 slags", Canadian Metallurgical Quarterly, Vol 30, 1991, p. 207.

4- M. Askari, M. H. Parsa and S.Kashaninejad, "Effect of thermal stress on damaging of refractories located around copper converter blowers", Journal of Iranian Metallurgical Engineering Society (Metallurgical Engineering), Vol. 2, winter 1998.

5- S. Kashaninejad, M. H. Parsa and M. Askari, "Simulation of gas injection into molten metal, part I computer simulation" Journal of Iranian Metallurgical Engineering Society (Metallurgical Engineering), Vol. 5, autumn 1999.

6- S.Kashaninejad, M. H. Parsa and M. Askari, "Simulation of gas injection into molten metal, part II cold model evaluation" Journal of Iranian Metallurgical Engineering Society (Metallurgical Engineering), Vol. 6, autumn 2000.

7- M. Askari, M. Sasani Ghamsari, "A New colloidal technique for the synthesis of lead sulfide nanoparticles", Scientia Iranica", Vol.10, No3, July2003.

8- E.Keshavarz Almdari, D.Moradkhani, D.Daravish, M.Askari., D.Rehnia,"Synergistic effect of MEHPA on Co- Extraction of Zinc and Cadmium with DEHPA , Minerals Engineering, Vol 17, Issue1, January 2004,pp89-92.

9- A.R.Mortazavi, M. Askari, "Degradation of ZnO varistor (Annealing Effects)", Engineering International Journal of IUST, 2004.

10- D.Moradkhani, M. Urbani, C.Y.Cheng, M.Askari, D.Bastani, "The separation of cadmium from Zinc with a synergistic mixture of nanylsalicylic acid & triisobutyl phosphine sulphide", Hydrometallurgy, Vol 78, issues 1-2, July 2005, pp 129-136.

11- M. Farahani, M. Askari, " Investigation of using DRI dust and fines in EAF", Payam Foolad Magazine, No 53, Oct 2005.

12- S. Mahshid, M. Askari, M Sasani Ghamsari, "Synthesis of TiO2 nanoparticles by hydrolysis and peptization of Titanium isopropoxide solution", Semiconductor Physics, Quantum Electronics & Optoelectronics, 2006. V. 9, N 2. P. 65-68.

13- S. Mahshid, M. Askari, M Sasani Ghamsari, "Synthesis of TiO2 nanoparticles by hydrolysis and peptization of Titanium isopropoxide solution", Journal of Materials Processing Technology, 189 (2007) 296-300 .

14- A. Hasanzadeh, M.Halali, M.Askari, M.T.Manzari, "Investigation & Modeling of splashing in the Pierce Smith Converter, Chemical Product & Process Modeling, Vol 3, issue1, 2008.

15- S. Mahshid, M. Askari, M Sasani Ghamsari, "Effect of Brookite presence on nanocrystalline anatase-rutile phase transformation", International Journal of Nanotechnology(IJNT), Vol 6, No 10, 2009, pp 961-972.

16- S. Mahshid, M. Askari, M. Sasani Ghamsari, N. Afshar, S. Lahuti, "Mixed -phase TiO2 nanoparticles preparation using sol-gel method" Journal of Alloys and Compounds, No 478, 2009, pp 586-589.

17- M. Nusheh, H. Yoozbashizadeh, M. Askari, N. Kuwata, J. Kawamura, J. Kano, F. Saito, H. Fukuyama, "Effect of mechanical milling on carbothermic reduction of magnesia", ISIJ International, Vol 50, No 5, 2010, pp 5-15.

18- H. Mehranpour, M. Askari, M. Sasani Ghamsari, H. Farzalibeik," Study on phase transformation kinetics of sol-gel drived TiO2 nanoparticles", J Nanoparticles, vol 2010, article ID 626978, 2010.

19- M. Nusheh, H. Yoozbashizadeh, M. Askari, H. Kubatake, H. Fukuyama, " Mechanically activated synthesis of single crystalline MgO Nanostructures" Journal of Alloys and Compounds, 506, 2010, pp. 715-720.

20- S. Mahshid, A. Dolati, M.Goodarzi, M. Askari, A. Ghahramanizadeh, " Self-organised titanium oxide nanotubes prepared in phosphate electrolytes: Effect of voltage and flourine concentration",R J of Electrochemistry, Vol 28, No 7, 2010, pp 67-74.

21- Sara. Mahshid, Sh. Lou, L.Young, S.S. Mahshid, M. Askari, A. Dolati," Carbon-Pt nanoparticles modified TiO2 nanotubes for simultaneous detection of Dopamine and Uric acid", Int J Nanoscience and Nanotechnology (IJNN), Vol 11, 2011, pp1-8.

22- S. Mahshid, Ch. Li,S. S. Mahshid, M. Askari, A. Dolati, L. Yang," sensitive determination of Dopamine in the presence of uric acid and ascorbic acid using TiO2 nanotubes modified with Pd, Pt and Au nanoparticles", Analyst, 2011. ".

23- M. Sasani Ghamsari, H. Mehranpour, M. Askari, H. Farzalibeik," Lamer theory approach to study the nucleation and growth of sol-gel derived TiO2 nanoparticles", submitted for publication in J. Colloid and Surface Science.


Annual Reports, Seminars & Congresses

1- M.Askari, "Copper lass Mechanism in Reverberatory-slag," SUT Annual Research Report, 1993.

2- M.Askari, " Recovery of copper from copper reverb slag", SUT Annual Research Report, 1994.

3- M.Askari, "Improvement of corrosion behavior of TBRC refractory lining - Part 1", SUT Annual Research Report, 1994.

4- M.Askari," The influence of main factors of lead loss in TBRC lead slags". First Iranian National Chemical Engineering Congress," Tarbiat Modarres University", Nov.1994.

5- M.Askari, "Surface tension role in pyrometallurgical processes". First Iranian National Chemical Engineering Congress ,Tarbiat Modarres University, Nov.1994.

6- M. Askari,"Refractory lining corrosion of furnaces in lead smelting", Second Iranian Ceramic Congress, Iran Science & Technology University, Nov.1994.

7- M.Askari Improvement of corrosion behavior of TBRC refractory lining - Part 2", SUT Annual Research Report, 1995.

8- M.Askari," Reduction roasting of low grade iron ore by carbon," SUT Annual Research Report, 1995.

9- M.Askari," Mechanism of metal losses in TBRC lead slags", First Iranian Seminar on nonferrous metals", Iran Copper Complex, Sarcheshrneh, Nov 1996.

10- M.Askari, "Magnetic Roasting of low grade iron ore by reducing gas," SUT Annual Research Report, 1996.

11- M.Askari, "Trouble-shooting & problem-solving in copper converter operation", SUT Annual Research Report, 1996.

12- M.Askari, "The Mechanism of Chemical Corrosion of TBRC linings" Fifth Iranian Corrosion Congress, Sept 1997, Tehran, Iran, PP387-389.

13- M.Askari, Sina Kashaninejad, M.H.Parsa, "Simulation of air injection in Converter", SUT Annual Research Report, 1997.

14- M.Askari, "Slag-Refractory interaction reactions in steelmaking", SUT Annual Research Report, 1997.

15- M.Askari, Sina Kashaninejad, M.H.Parsa, "Simulation of gas injection in Molten Metals part one: computer modeling," Second Congress of Metallurgy Engineers, SUT, Tehran, Oct 1998, PP 53-64.

16- M.Askari, Sina Kashaninejad, M.H. Parsa," Simulation of gas injection in molten metals - part two: Water Cold Model", Second Congress of Metallurgy Engineers, SUT, Tehran, Oct 1998, PP65-74.

17- M.Askari, Sina Kashaninejad, M.H.Parsa, " Simulation of gas presence in liquid under injection", The Fourth Iranian National Chemical Engineering Congress, Vol 1, P132, March 1998.

18- M. Askari, "Replacement of oxygen by Nitrogen in Molybdenite flotation of Sarcheshmeh copper complex," The Fourth Iranian National Chemical Engineering Congress". March 1998.

19- M.Askari, "Refractory-Slag interaction reactions in steelmaking- part two," SUT Annual Research Report, 1998.

20- M.Askari, "Back-attack in copper converter," SUT Annual Research Report, 1998.

21- M. Askari, M.H.Parsa, S. Kashaninejad, "Simulation of presence of gaseous phase in injected fluid", Fourth Conference of Iranian chemical Engineering, Sharif University of Technology, Tehran, Iran, April 1999, PP.132-137.

22- M.Askari, "Local corrosion of refractory around P-S converter tuyeres, The 6th National Corrosion Congress, Iran, April 1999.

23- M.Askari, "The role of back attack in steelmaking industries", Steel 78 Congress, April 1999, Isfahan.

24- M.Askari, "Feasibility study of struntium carbonate production from internal sources." SUT Annual Research Report, 1999.

25- M.Askari, Sina Kashaninejad, "Fluid flow profile of molten metal in copper Isasmelt process," The Second Iranian Non-ferrous Congress, Kerman University, April 2000.

26- M.Askari," Materials balance of P-S copper converter," The Second Iranian Non-ferrous Congress, Kerman University, April 2000.

27- M.Askari, "Impurities of Iran Celestine ores & their destructive effects," The Fourth Congress of Metallurgy Engineers, University of Tehran, Oct 2000.

28- M.Askari, M.Sasani Ghamsari," Production & characterization of PbS nanocrystal", The Fourth Congress of Metallurgy Engineers, University of Tehran, Oct 2000.

29- M.Askari, "Prefused Calcium aluminate Slags (LDSF)", Steel 79 Congress, 2000.

30- Z.A Nemati, A.R.Mortazavi, M.Askari, A.A. Rahimpoor," Properties stabilization in ceramic (ZnO) varistors", 16th International Power Congress", Tehran, Iran, 2001.

31- D.Moradkhani, E.K.Alamdari, M.Askari," Investigation of Interfacial tension of Water/H2SO4/DEHPA/Kerosene system", Bio-& Hydrometallurgy Conf., March 2002, South Africa

32- M.Sasani, M. Askari," Lead sulfide nanoparticles synthesized by new colloidal technique", 10th Foresight Conference on Molecular Nanotechnology, 11 to 13 October, Maryland, USA, 2002.

33- Z.A.Netnati, A.R.Mortazavi, M.Askari," Properties Stabilization in ZnO Varistor via Annealing...", 4th Iranian Ceramic Soc. Meeting, April 2002.

34- Z.A Nemati, A.R Mortazavi, M.Askari," The effect of Boron oxide on electrical property variations of Zinc Oxide varistor after annealing ",10th Int. Ceramics Congress at CIMTEC 2002 , Faenza , Italy, 14-18 July 2002 .

35- M.Askari, D.Moradkhani," Water Extraction & Determination of Interfacial tension of Water/H2SO4/DEHPA/Kerosene system by single drop technique," ...........

36- M.Askari, D.Moradkhani, "Materials Transfer in Water/H2SO4/DEHPA/Kerosene system by single drop technique," Iranian Congress of Chemistry & Chemical Engineering Soc,...............?

37- S.Kashaninejad, M.H.Parsa, M.Askari, "Study of Refractory lining Destruction around Tuyere line in Sareheshmeh copper smelter converters", 5th international conference, copper 2003, 30Nov-3 Dec,2003, Santiago, Chile.

38- S. Kashaninejad, M. Askari and M.H.Parsa, "Study of tuyere zone refractory destruction in the Sarcheshmeh converters", COM, Canada, August 2004.

39- M.Mokmeli, M.Askari, A.Dolati, "Tungsten Carbide recycling from Petroleum Drilling Bit Scraps", 8th Annual Congress of Iran Metallurgical Engineering Soc., Isfahan University of Technology, Oct 2004.

40- S. Mahshid, M. Askari, M Sasani Ghamsari,, "Synthesis of TiO2 nanoparticles in order to use in drug delivery", 1st Seminar in usage of nanotechnology in medical science, December 2004, University of Tehran, Tehran, Iran.

41- D. Moradkhani, D.Bastani, M.Askari, H.Angoraj, "Pilot plant demonstration of zinc solvent extraction at Iran Zinc Mines Development Company", Lead & Zinc 05, Oct 17-19, 2005, Kyoto, Japan.

42- S. Mahshid, M. Askari, M Sasani Ghamsari, "Effect of pH on TiO2 nano-particles size prepared via the hydrolysis method", 9th annual congress of metallurgical engineering society, November 2005, Shiraz University, Shiraz, Iran.

43- S. Mahshid, M. Askari, M Sasani Ghamsari, "Synthesis of TiO2 nanoparticles by hydrolysis and peptization of Titanium isopropoxide solution, 1st Nanostructure Workshop, kish university, March 2006

44- S. Mahshid, M. Askari, M Sasani Ghamsari, "Effect of reactants concentration ratio on the synthesis of TiO2 nanoparticles by hydrolysis of TTIP", 1st International congress on Nanoscience and Nanotechnology (ICNN2006), December 2006, University of Tehran, Tehran, Iran.

45- S. Mahshid, M. Askari, M Sasani Ghamsari, "Anatse-rutile phase transformation in TiO2 nanoparticles prepared from different pH solutions" 11th annual congress of metallurgical engineering society, May 2007, University of Tehran, Tehran, Iran.

46- S. Mahshid, M. Askari, M Sasani Ghamsari, "Effect of peptization on the synthesis of TiO2 nanoparticles by hydrolysis of TTIP", 6th conference of Iranian ceramic association, May 2007, Research Center of Material & Energy, Tehran, Iran.

47- S. Mahshid, M. Askari, M Sasani Ghamsari ,"Effect of Brookite presence on nanocrystalline anatase-rutile phase transformation", 2nd Conference on Nanostructures (NS2008), March 11-14, 2008, Kish University, Kish Island, Iran.

48- S. Mahshid, M. Askari, M Sasani Ghamsari, Nanocrystalline TiO2: parameters and effectiveness", 18th International Congress of Chemical and Process Engineering (CHISA2008), August 2008, Prague, Czech Republic.

49- S. Mahshid, M. Askari, M Sasani Ghamsari "Nucleation and growth process during heat treatment of TiO2 nanoparticles prepared from different pH solution, 2st International congress on Nanoscience and Nanotechnology ,ICNN2008, October 2008, University of Tabriz, Tabriz, Iran.

50- S. M. Hamedi, M. Askari " Fabrication of vertically oriented TiO2 nanotube arrays using Ethylene Glycol "2st International congress on Nanoscience and Nanotechnology, ICNN2008, (international conference), Tabriz, Oct 2008.

51- S. Mahshid, A. Dolati, M. Askari, A. Karimi, "Anodizing of TiO2 nanotubes in fluoride solution", Northern Area Eastern Conference on Minimizing Infrastructure Corrosion and International Symposium on Fundamental Corrosion Research In Progress, Westin Harbor Castle, 1 Harbor Square, Toronto, Ontario, Canada, October 2008.

52- A. Dolati, M. Askari, R. Mortazavi, S. Mahshid,, "Study on corrosion behavior in reinforced concrete at Persian gulf", Northern Area Eastern Conference on Minimizing Infrastructure Corrosion and International Symposium on Fundamental Corrosion Research In Progress, October 2008, Westin Harbor Castle, 1 Harbor Square, Toronto, Ontario, Canada

53- S. M. Hamedi, M. Askari," Fabrication of titanium oxide nanotube arrays by anodic oxidation in nonaqueous solutions", presented in The Second Joint conference of 12th Iranian Metallurgical society annual Congress and 20th Iranian Foundry Society Seminar , 18-19 Nov. 2008, Islamic Azad University- Karaj Branch, Iran.

54- S. Mahshid, A. Dolati, A.Karimi, M. Askari, " Electrochemical behaviour of TiO2 nanotubes fabricated by anodizing", Nanotech insight conference 2009, 29 Mar - 2 Apr, Barcelona, spain.

55- P.Darmani, M.Askari, D.Moradkhani, "Recovery of zinc from low grade oxide mineral of Angouran Mine by a counter- current extraction process", COM2008, May 4-7, Edmonton, Canada.

56- P.Darmani, M.Askari,l D.Moradkhani "Determine the proper conditions of extractant for separation of Zn & Cd by solvent extraction method", COM2008, May 4-7, Edmanton, Canada.

57- S.Mahshid, A.Dolati, A.Karimi, M.Askari, "Electrochemical behavior of TiO2 nanotubes fabricated by anodizing", Nanotech Insight Conference, Barcelona, Spain, Mar.2009.

58- A.Dolati, M.Askari,S.S.Mahshid, R.Mortazavi, S.Mahshid," Performace behavior of Rainforced Concrete in Persian Gulf Waters", The 11th annual national Iranian Corrosion Congress, Kerman, Iran, May 2009.

59- M.Nusheh, H.Yoozvashizadeh, M.Askari, H.Fukuyama, j.J.Kano, F.Satio," Particle size effect on Carbothermic Reduction of Magnesia, 158th ISIJ Meeting (CAMP-ISIJ), Kyoto university, Japan, Sept.2009.

60- S.Shahini, M.Askari, "Hydrothermal Synthesis of anatase Crystalline Structure of TiO2 nanoparticles", 3re joint conferecne of 13th Iranian Metallurgical Society annual Congress and 21th Iranian Foundry Society seminar, Bahonar University, Kerman, Iran, Nov.2009.

61- M.R.Tavakoli, M.Askari, M.Farahani, A.Shahahmadi, "Introduction to the new problem solving apprach for DRI", 3re joint conferecne of 13th Iranian Metallurgical Society annual Congress and 21th Iranian Foundry Society seminar, Bahonar University, Kerman, Iran, Nov.2009.

62- M.R.Tavakoli, M.Askari, M.Farahani, A.Shahahmadi," New aprooch of DRI oxidation protection (pilot plant tests), Steel symposium 88, yazd, Iran, March 2010.

63- S.Mahshid, M.Goodarzi, A.Dolati, M.Askari," A breif stydy on the tubular structure of anodic TiO2 prepared in phosphate-base and sulfhatebase electrolytes", The 3rd Conference on nanostructure (NS2010), Kish, Iran, March 2010.

64- S.M.Hamedi, M.Askari, "Titania nanotube arrays prepared in DMF?HF electrolytes", The 3rd Conference on nanostructure (NS2010), Kish, Iran, March 2010.

65- M.Naghibi Nezhad, A.Simchi, M.Askari, "Molecular dynamic simulation of surface growth of metal clusters in gas phase condensation processes", The 3rd Conference on nanostructure (NS2010), Kish, Iran, March 2010.

66- S. Mahshid, A. Dolati, M. Goodarzi, M. Askari, A. Ghahramaninezhad "Self-organized Titanium Oxide nanotubes prepared in phosphate electrolytes: effect of voltage and fluorine concentration", ECS Transactions - Vancouver, Canada" Volume 28, "Nanotechnology (General) - 217th ECS Meeting, Aug 2010..

67- H.Mehranpour, M.Askari, M.Sasani Ghamsari, M.Farzalibeik, "Application of Sugimoto model on particle size prediction of colloidal TiO2 nanotarticles Tech Connect World Conference and Expo 2010, Anaheim, Ca, USA, 21-25 June 2010.

68- A. Teymouri, M. Askari, M. Asadirad, " Fabrication of silica nanowire with various substrates and investigation of structural properties and their behavior", X international conference on nanostructured materials - NANO 2010", Rome, Italy, 13-17 September 2010.

69- M.R.Tavakoli, M.Askari, M.Farahani, A.Shahahmadi," Cold Briquetting of Sponge Iron (CBSI)," COM2010, Vancouver, BC, Canada, Oct 2010.

70- A.Teymouri, M. Askari, "The effect of time and annealing time on the size of the silicaNano rods fabricated by VLS technique", Presented in the 11th national seminars on surface engineering and ..... , Tehran, Iran, Oct 2010.

71- A. M. Dayaghi, M. Askari, "Co/Mn spinel thin film coating on stainless steel for solid oxide fuel cell interconnect prepared by sol-gel and dip coating techniques", Accepted in the 4th joint conference of 14th Iranian Metallurgical Society annual congress and 22nd Iranian Foundry Society seminar, Tehran, 17-19 Nov 2010.

72- A. Teymouri, M. Askari, "Silica nanowires growth on different substrates- characteristics and behavior", to be presented in the 4th joint conference of 14th Iranian Metallurgical Society annual congress and 22nd Iranian Foundry Society seminar, Tehran, 17-19 Nov 2010.

73- A.M. Dayaghi, M. Askari," Protective Co3O4 coating on Ferritic stainless steel in order to be applied to solid oxide fuel cell interconnects" Accepted in the fourth congress of Fuel Cell, Iran, 2010.