Journal Papers

A. English:

• K. Sadrnezhaad and J. F. Elliott, The Melting Rate of DRI Pellets in Steelmaking Slags, Iron and Steel International, 1980, pp 327-339.

• K. Sadrnezhaad, Continuous Melting of Metallized Ore Pellets, Iron and Steel International, 1981, pp 309-314.

• K. Sadrnezhaad, Designing a New System for Technical and Engineering Education, AEESCA Journal of Eng. Education, Vol. 1, No. 7, 1981, pp 71- 74.

• K. Sadrnezhaad, Role of Laboratories in Technical Education, AEESCA Journal of Engineering Education, Vol. 1, No. 7, 1981, pp 21-22.

• K. Sadrnezhaad, Sulfur Species in Particulates Emitted from Reducing Coal Combustion and Pyrometallurgical Furnaces, Journal of Engineering, I. R. Iran, Vol. 1, No. 1, 1988, pp 73-78.

• K. Sadrnezhaad, Direct Reduced Iron: An Advantageous Charge Material for Induction Furnaces, Journal of Engineering, I. R. Iran, Vol. 3, Nos. l&2, 1990, pp 37-47.

• K. Sadrnezhaad, Effect of Inoculation on Microstructure and Properties of C-Mn and Low Alloy Steels: Journal of Engineering, I. R. Iran, Vol. 4, Nos. l&2, 1991, pp 65-72.

• K. Sadrnezhaad, Thermodynamics and Kinetics of Vaporization of PbS from Complex Cu-Fe Mattes, Journal of Engineering, I. R. Iran, Vol. 8, No. 4, 1995, pp 199- 211.

• K. Sadrnezhaad, Effect of Impurities on Energy Requirements in Electric Steelmaking with DRI, Scientia Iranica, Vol. 3, Nos. 1,2&3, 1996, pp 113-119.

• F.M.H. Zarandi and K. Sadrnezhaad, Thermomechanical Study in Combustion Synthesized Ti-Ni Shape Memory Alloy, Materials and Manufacturing Processes, Vol. 12, No. 6, 1997, pp 1093-1105.

• K. Sadrnezhaad, F. Mashhadi and R. Sharghi, Heat Treatment of Ni-Ti Alloy for Improvement of Shape Memory Effect, Materials and Manufacturing Processes, Vol. 12, No. 1, 1997, pp 107-115.

• K. Sadrnezhaad and A. Simchi, Simulation of the Iron Smelting-Reduction Process, Journal of Materials Science and Technology, Vol. 15, No. 2, 1999, pp 121-127.

• E. Keshavarz Alamdari and S.K. Sadrnezhaad, Thermodynamics of Extraction of Mo0₄^2- from Aqueous Sulfuric Acid Media with TBP Dissolved in Kerosene, Hydrometallurgy, Vol. 55, 2000, pp 327-341.

• S.K. Sadrnezhaad and E. Keshavarz Alamdari, Thermodynamics of Extraction of ReO₄^- from Aqueous Sulfuric Acid Media with Tri-n-Butyl Phosphate Dissolved in Kerosene, Metallurgical and Materials Transactions B, Vol. 32B, No. 1, February 2001, pp 5-10.

• S.K. Sadrnezhaad, A. Gharavi and A. Namazi, Software for Kinetic Process Simulation, IJE Transactions A: Basics, Vol. 16, No. 1, 2003, pp 61-72.

• M. Monajjemi, F. Mollaamin, M. R. Gholami, H. Yoozbashizadeh, S.K. Sadrnezhaad and Hoda Passdar, Quantum Chemical Parameters of Some Organic Corrosion Inhibitors, Pyridine, 2-Picoline 4-Picoline and 2,4-Lutidine, Adsorption at Aluminum Surface in Hydrochloric and Nitric Acids and Comparison Between Two Acidic Media, Main Group Metal Chemistry, Vol. 26, No. 6, (2003), pp 349-361.

• Sadegh Badakhshan Raz and S.K. Sadrnezhaad, Effects of VIM Frequency on Chemical Composition, Homogeneity and Microstructure of NiTi Shape Memory Alloy, Materials Science and Technology, 2004, Vol. 20, No. 5, pp 593-598.

• S. K. Sadrnezhaad and A. R. Selahi, Effect of Mechanical Alloying and Sintering on Ni-Ti Powders, Materials and Manufacturing Processes, Vol. 19, No. 3, 2004, pp 475-486.

• S.K. Sadrnezhaad and E. Keshavarz Alamdari, Thermodynamics of Extraction of Zn²⁺ from Sulfuric Acid Media with a Mixture of Dehpa and Mehpa, IJE Transactions B: Applications, Vol. 17, No. 2B, 2004, pp 193-202.

• B. Hashemi, Z. A. Nemati and S.K. Sadrnezhaad, Oxidation Mechanisms in MgO-C Refractories, China's Refractories, Vol. 13, No. 2, 2004, 13-18.

• S.K. Sadrnezhaad and S. Badakhshan Raz, Interaction between Refractory Crucible Materials and the Melted NiTi Shape Memory Alloy, Metallurgical and Materials Transactions B, Vol. 36B, No. 3, June 2005, pp 395-403.

• D. Darvishi, D.F. Haghshenas, E. Keshavarz Alamdari, S.K. Sadrnezhaad and M. Halali, Synergistic Effect of Cyanex 272 or Cyanex 302 on Separation of Cobalt and Nickel by D2EHPA, Hydrometallurgy, Vol. 77, Issue 3-4, 2005, pp. 227-238.

• S.K. Sadrnezhaad and O. Lashkari, Property Change during Fixtured Sintering of NiTi Memory Alloy, Materials and Manufacturing Processes, Vol. 21, No. 1, January  2006, pp 87-96.

• S. Badakhshan Raz and S. K. Sadrnezhaad and, Microstructural Investigation of Hard Phases in As Cast Ni-Ti Memory Alloy, Praktische Metallurgraphie, 42, 9, 2005, pp 454-469.

• S. Sanjabi, S.K. Sadrnezhaad, K. Yates, Z. H. Barber, Growth and Characterization of Ti_xNi_1-x Shape Memory Thin Films Using Simultaneous Sputter Deposition From Separate Elemental Targets, Thin Solid Films, 491, 2005, pp 190-196.

• S. K. Sadrnezhaad and Sadegh Badakhshan Raz, Ingredient Losses during Melting Binary Ni-Ti Shape Memory Alloys, Journal of Materials Science and Technology, 2005, Vol. 21, No. 4, pp 484-488.

• E. Keshavarz Alamdari, S. K. Sadrnezhaad and Z. Mos-hefi Shabestari, Chloroform Aided Extraction Spectrophotometric Determination of Rhenium Using Thiocyanate Complexing Agent, J. Mater. Sci. Technol., Vol. 21, No. 2, 2005, pp 234-238.

• Z.A. Nemati,  S.K. Sadrnezhaad and H.R. Ahmadi Moghari, Effect of of Ferrosilicon, Silicon and Aluminum Antioxidants on Microstructure and Mechanical Properties of Magnesia-Graphite Refractory, Refractories Applications and News, Vol. 10,  2005, pp 2-9.

• Z.A. Nemati,  S.K. Sadrnezhaad and B. Hashemi, Behavior of ZrSiO₄ in a reducing atmosphere, Internationales Feuerfest-Kolloqium, No. 48, 2005, pp130-133.

• S.K. Sadrnezhaad, H. Arami, H. Keivan and R. Khalifezadeh,  Powder Metallurgical Fabrication and Characterization of Nanostructured Porous NiTi Shape Memory Alloy, Materials and Manufacturing Processes, Vol. 21, 2006, pp 727–735.

• S. Sanjabi, Y.Z. Cao, S.K. Sadrnezhaad and Z.H. Barber, Binary and ternary  NTi-based shape memory films deposited by simultaneous sputter deposition from elemental targets,  J. Vac. Sci. Technol. A, 23, (5), Sep/Oct 2005, pp 1425-1429.

• S.K. Sadrnezhaad, S. Mahshid, B. Hashemi and Z.A. Nemati, Oxidation Mechanism of C in MgO-C Refractory Bricks, Journal of the American Ceramic Society, 89, 4, 2006, pp 1308-1316.

• S. Sanjabi, S.K. Sadrnezhaad and Z.H. Barber, “Sputter alloying of Ni, Ti and Hf for fabrication of high temperature shape memory thin films,  Materials Science and Technology, Vol. 22, No. 2, (2006), 1-5.

• S.K. Sadrnezhaad and M.R. Vaezi, The effect of addition of Tiron as a surfactant on the microstructure of chemically deposited zinc oxide, Materials Science and Engineering B, 128, 2006, pp 53-57.

• M.R. Vaezi and S.K. Sadrnezhaad, Effects of substrate material and annealing temperature on morphology of zinc oxide films, Materials Science and Technology, Volume 22, Number 3, March 2006, pp 308-314(7).

• S. Espiari, F. Rashchi and S.K. Sadrnezhaad, Hydrometallurgical treatment of tailings with high zinc content, Hydrometallurgy, Vol. 82, No. 1, 2006, pp 54-62.

• M.R. Vaezi and S.K. Sadrnezhaad, Highly textured ZnO thin films: An economical fabrication, doping by Mn²⁺ and Sn²⁺ and approachment for optical devices, Materials and Design, Vol. 28, Issue 3, 2007, pp 1065-1070.

• S.K. Sadrnezhaad and S.H. Mirabolghasemi, Optimum temperature for recovery and recrystallization of 52Ni48Ti shape memory alloy, Materials and Design, Volume 28, Issue 6, 2007, pp 1945-1948.

• M. Mozammel, S.K. Sadrnezhaad, E. Badami and E. Ahmadi, Breakthrough curves for adsorption and elution of rhenium in a column ion exchange system,   Hydrometallurgy, 85, 2007, pp 17–23.

• S.K. Sadrnezhaad and M.R. Vaezi, Kinetics of TSCD zinc oxide nano-layer growth by modified diffuse-interface model,  Ceramics International, (In Press, Corrected Proof, Available online 12 September 2006).

• M. Mazloumi, R. Khalifehzadeh, S.K. Sadrnezhaad and H. Arami, Alumina Nanopowder Production from Synthetic Bayer Liquor, Journal of the American Ceramic Society, Vol. 89, No. 12, (2006), 3654–3657.

• M.R. Vaezi and S.K. Sadrnezhaad, Nanopowder synthesis of zinc oxide via solochemical processing, Materials & Design, Vol. 28, Issue 2, 2007, pp 515-519.

• M. Mazloumi, H. Arami, R. Khalifehzadeh and S.K. Sadrnezhaad, Studies on synthesis of alumina nanopowder from synthetic Bayer liquor, Materials Research Bulletin, (In Press, Corrected Proof, Available online 13 November 2006).

• S.K. Sadrnezhaad, E. Ahmadi and M. Mozammel, Kinetics of Silver Dissolution in Nitric Acid from Ag-Au_0.04-Cu_0.10 and Ag-Cu_0.23 Scraps, Journal of Materials Science and Technology, Volume 22, Number 5, September 2006, pp. 696-700.

• S.K. Sadrnezhaad, Z.A. Nemati, S. Mahshid, S. Hosseini and B. Hashemi, Effect of Al Antioxidant on the Rate of Oxidation of Carbon in MgO–C Refractory, Journal of the American Ceramic Society, 90, 2, 2007, pp 509–515.

• R. Khalifehzadeh, S. Forouzan, H. Arami and S.K. Sadrnezhaad, "Prediction of the effect of vacuum sintering conditions on porosity and hardness of porous NiTi shape memory alloy using ANFIS ", Computational Materials Science, In Press, Corrected Proof, Available online 13 March 2007.

• H. Arami, M. Mazloumi, R. Khalifezadeh and S.K. Sadrnezhaad,  "Sonochemical preparation of TiO₂ nanoparticles", Materials Letters, (Article in Press).

• Hamed Arami, Mahyar Mazloumi, Razieh Khalifehzadeh, Shahriar Hojjati Emami and S.K. Sadrnezhaad, "Polypyrrole/multiwall carbon nanotube nanocomposites electropolymerized on copper substrate", Materials Letters, Volume 61, Issue 22, September 2007, pp 4412-4415.

• M.R. Vaezi and S.K. Sadrnezhaad, “Gas sensing behavior of nanostructured sensors based on tin oxide synthesized with different method”, Materials Science and Engineering: B, Volume 140, Issues 1-2, 25 May 2007, pp 73-80.

• M.R. Vaezi and S.K. Sadrnezhaad, “Improving the conductance of chemical deposited zinc oxide thin films by doping with Sn”, Under review  for publication by Materials Science and Engineering B.

• M.R. Vaezi and S.K. Sadrnezhaad, “Effect of surface modification on the recovery time and stability of nanostructured tin oxide thick films gas sensors”, Submitted  for publication to Materials Science and Engineering B, Vol. ???, No. ??, 2007, pp ??-??.

• D. Darvishi, D.F. Haghshenas, S. Etemadi, E. Keshavarz Alamdari and S.K. Sadrnezhaad, "Water adsorption in the organic phase for the D2EHPA-kerosene/water and aqueous Zn²⁺, Co²⁺, Ni²⁺sulphate systems", Hydrometallurgy, Volume 88, Issues 1-4, August 2007, pp 92-97.

• M.R. Vaezi, S.K. Sadrnezhad, Tolou Shokuhfar and A. Shokuhfar, "Synthesis of zinc oxide nanopowder and nanolayer via chemical processing", Int. J. Nanomanufacturing, Vol. x, No. x, xxxx.

• M.R. Vaezi, A. Shokuhfar and S.K. Sadrnezhad, "SnO₂/ZnO double-layer thin films: a novel economical preparation and investigation of sensitivity and stability of double-layer gas sensors", Int. J. Nanomanufacturing, Vol. x, No. x, xxxx.

• H. Arami, M. Mazloumi, R. Khalifehzadeh and S.K. Sadrnezhaad, "Self assembled nanostructured ZnO hollow spheres with UVA luminescence", Advances in Applied Ceramics, Vol. ??, No. ??, 2007, pp 1-5.

• S. Shahandeh, H. Arami, S. K. Sadrnezhaad, "Interfacial Energy Determination of Nano-scale Precipitates by CALPHAD Description of Gibbs-Thomson Effect", Journal of Materials Science, Under Publication.

• M.R. Mohammadi, D.J. Fray, S.K. Sadrnezhaad and A.Mohammadi, "A simple particulate sol–gel route to synthesize nanostructural TiO2–Ta2O5 binary oxides and their characteristics", Materials Science and Engineering B, In Press, Corrected Proof, Available online 26 July 2007.

• M.R. Vaezi, S.K. Sadrnezhaad and L. Nikzad, "Electrodeposition of Ni- SiC nano- composite coatings and evaluation of wear and corrosion resistance and electroplating characteristics", Colloids and Surfaces A: Physicochemical and Engineering Aspects, In Press, Accepted Manuscript, Available online 2 August 2007.

• Hamed Arami, Mahyar Mazloumi, Razieh Khalifehzadeh and S.K. Sadrnezhaad, "Bundles of self assembled boehmite nanostrips from a surfactant free hydrothermal route", Journal of Alloys and Compounds, In Press, Accepted Manuscript, Available online 19 July 2007.

• M.R. Vaezi and S.K. Sadrnezhaad, "Improving the electrical conductance of chemically deposited zinc oxide thin films by Sn dopant", Materials Science and Engineering: B, In Press, Corrected Proof, Available online 19 June 2007.

 

 

B. Persian:

• K. Sadrnezhaad, How Sponge Iron Pellets Melt in Steelmaking Furnaces, Journal of the Faculty of Engineering, Tehran University, Vol. 45, 1362, 1983, pp 85-98.

• K. Sadrnezhaad, Research and University, Journal of Amirkabir, 1365, 1986, pp 80-83.

• K. Sadrnezhaad, Alloy Steel: Importance, Grades and Applications, Journal of the Faculty of Engineering, Tehran University, Vol. 48, 1366, 1987, pp 41-55.

• K. Sadrnezhaad, Nationwide Network for Scientific and Technical Information, Journal of Amirkabir, 1365, 1987, pp 46-47.

• K. Sadrnezhaad, New Topics for Research in Steel, Journal of Amirkabir, 1367, 1988, pp 22-31.

• K. Sadrnezhaad, Type, Shape and Influence of Sulfur Compounds in Steel, Scientific and Technical Journal of Ministry of Mining and Metals, 3, 1367, 1988, pp 26-33.

• K. Sadrnezhaad, F. Kashani and S. Heshmatimanesh, Production of V and V-Nb Microalloyed Steels by Plunging Technique and Investigation of their Properties, Journal of the Faculty of Engineering, Tehran University, 49, 1368, 1989, pp 45-60.

• K. Sadrnezhaad, J. Wahdati and M. R. Abutalebi, Use of Sponge Iron in Production of Cast Iron and Steel, Journal of the Faculty of Engineering, Tehran University, 49 1989, pp 33-44.

• K. Sadrnezhaad, Effect of Phosphorus on Properties of Steel, Journal of the Faculty of Engineering, Tehran University, 1990, pp 87-101.

• K. Sadrnezhaad, H. Jozani and F. Khomamizadeh, Effect of Physicochemical Conditions on Dephosphorization of Steel through Gas Injection with CaO, International Journal of Engineering Science, Iran University of Science and Technology, 1990, pp 41-55.

• K. Sadrnezhaad, H. Kabiri, H. Damavandi and M. Samadian, Roasting and Reduction of Molybdenite Concentrate Produced in Sar-Cheshmeh Copper Complex, Journal of Amirkabir, 1369, 1990, 119-126.

• K. Sadrnezhaad and A. Simchi, Simulation of Direct Smelting of Steel, Journal of the Faculty of Engineering, Tehran University, No. 56, 1374, 1995, pp 45-56.

• K. Sadrnezhaad and G. Nemati, Rate Controlling Mechanisms and Kinetic Co-relations for Desulfurization of Molten Iron with Different Desulfurizers, Journal of Engineering of Ferdowsi University of Mashhad, Vol. 7, No. 2, 1374, 1995, pp 27-51.

• K. Sadrnezhaad and A. Harati, Effect of Titanium Nitride, Carbonitride and Carbosulfide on Properties of Low Alloy Steel, Journal of the Faculty of Engineering, Tehran University, 1375, 1996, pp 38-56.

• K. Sadrnezhaad and A. Harati, Efficiency of Absorption of Titanium by Mild Carbon Steel, Journal of Amirkabir, Vol. 8, No. 32, 1375, 1996, pp 240-247.

• K. Sadrnezhaad and H. Ahmadi, Production of High Thick Ductile Cast Irons, Steel, Vol. 2, No. 19, 1375, 1996, pp 24-31.

• S.K. Sadrnezhaad, Role of Industrial Relationship in Higher Education Planning, Journal of Three Fold Congress, Amirkabir University, 1375, 1996, pp 15-19.

• A. Simchi and K. Sadrnezhaad, Optimization of Direct Reduction Process with Partially Oxidized Natural and Recovered Gas, Journal of Engineering of Ferdowsi University of Mashhad, Vol. 9, No. 2, 1376, 1376, 1997, pp 119-134.

• M. Farazpei and K. Sadrnezhaad, Morphology and Kinetics of Sulfidation of Low Carbon Steel with H₂S and SO₂ at 823 to 923K, International Journal of Engineering Science, Iran University of Science and Technology, Vol. 8, No. 2B, 1376, 1997, pp 57-72.

• K. Sadrnezhaad and H. Beigi, Effect of Phosphorous on Annealing-Texture and Deep Drawing capability of Steel Sheets used in Auto Industry, Steel, Vol. 4, No. 48, 1377, 1998, pp 24-31.

• K. Sadrnezhaad and M. Farazpei, Kinetics of Reaction of SO₂ with CaO at 1123K, Journal of the Faculty of Engineering, Tehran University, 1378, 1999, pp 59-64.

• K. Sadrnezhaad and H. Ahmadian,.Shape Memory Properties in Cu-Zn-Al Alloy, Journal of Esteghlal, Vol. 17, No. 2, 1377, 1999, pp 139-153.

• S. K. Sadrnezhaad and M. R. Saleh, Simulation of Kinetics of Corrosion Reactions, International Journal of Engineering Science, Iran University of Science and Technology, Vol. 11, No. 2, 1379, 2000, pp 73-86.

• K. Sadrnezhaad, H. Khorsand and A. Nangir, Effect of Thermal Cycling on Transformation Temperatures in 69.85 wt% Cu, 27.08 wt% Zn, 2.29 wt% Al, 0.05 wt% Ti Memory Alloy, Sharif, No. 19, 1380, 2001, pp 44-49.

• S.K. Sadrnezhaad and A. Barnush, Kinetics of Electrolytic Precipitation of Nickel from n-Butilamine in Anisol-Phenantren-TBABF₄ Aromatic Solvent, Journal of Modarres, No. 5, 1380, 2001, pp 19-31.

• S.K. Sadrnezhaad, A. Barnush and M. Ghorbani, Mechanism of Reduction of Copper Chloride from n-Butilamine Electrolyte in Molten Naphthalene, Journal of the Faculty of Engineering, Tehran University, Vol. 35, No. 3, 1380, 2001, pp 337-348.

• S.K. Sadrnezhaad and E. Najafi, Kinetic Processes Data Bank: KDM Software, International Journal of Engineering Science, Iran University of Science and Technology, Vol. 12, No. 3, Year 1380, 2001, pp 33-43.

• S.K. Sadrnezhaad, E. Keshavarz Alamdari, M. Salimi, Z. Moshefi Shabestri and M. Akbari, Solvent Extraction of Zinc from Aqueous Sulfuric Acid Media with Organo-Phosphoric Solvents, Metallurgical Engineering, Vol. 4, No. 11, 1380, 2001, pp 34-37.

• M. H. Noorbala, H. Fallah Huseini, R. Afzalzadeh, K. Sadrnezhaad, J. Bakhtiyary, A. Asgari, H. R. Naderian and M. Kavoli Haghighi, Planning and Fabrication of Experimental Artificial Electromechanical Sphincter of Urethral Using a Memory Shape Alloy for Urinary Incontinence, Hakim Research Journal, Vol. 4, No. 3, 1380, 2001, pp 155-162.

• A. O’hadizadeh, E. Keshavarz Alamdari, Z. Moshefi Shabestari, M. Akbari and S. K. Sadrnezhaad, Effect of TBP Modifier on Extraction Parameters of Nickel with D2EHPA, Metallurgical Engineering, Vol. 5, No. 13, 1381, 2002, pp 46-50.

• S.K. Sadrnezhaad, S. T. Naimi and A. Nuri, Measurement of Shape Memory Properties in Nitinol Cast Alloy and Effect of Thermal Cycling on Strain Recovery, Metallurgical Engineering Journal, No. 15, 1382, 2003, pp 29-36.

• S.K. Sadrnezhaad, S. T. Naimi, M. Fathi  and N. Hassanzadeh Nemati, Effect of Bending on Properties of  Memory Staples for Joining Bones, Metallurgical Engineering, Vol. 7, No. 18, 1383, 2004, pp 10-16.

• S.K. Sadrnezhaad, S. T. Naimi  and N. Hassanzadeh Nemati, Effect of Gaseous Impurities  on Microstructure and Hardness of Nitinol Shape Memory Alloy, Metallurgical Engineering, Vol. 8, No. 20, 1384, 2005, pp 56-63.

• S.K. Sadrnezhaad, A.H. Tavabi and S. Ghoraishi, Effect of Cold Deformation on Superelasticity and Morphology of Four Orthodontic Nitinol Wires, Iranian Journal of Biomedical Engineering, Vol. 1, No. 2, 1383, 2005, pp 181-192.

• M. Basafa, S.K. Sadrnezhaad and S. Ghoreishi, “Comparison of load-deflection characteristics of nickel-titanium orthodontic wires”, Journal of Dental School, Shahid Beheshti Medical Sciences University, Vol. 24, No. 2, 1385, 2006, p 6 and pp 171-179.

• S.K. Sadrnezhaad, N. Hassanzadeh Nemati, P. Bohluli and B. Eslami, "Biocompatibility of Iranian NiTi Alloy", Hakim Research Journal,  Vol. 9, No. 2, Summer 1385, 2006, pp 50-56.

• S.K. Sadrnezhaad, Mahmudian and Razavimanesh, "Re    ", Journal of Faculty of Engineering,

• A.H. Tavabi, S.K. Sadrnezhaad and S. Askari, "Microstructure and Transformation in Aged Ni-Ti Alloy",  Journal of Faculty of Engineering, Tehran University, Vol. 40, No. 7, pp 933-941.

• S.K. Sadrnezhaad and M.R. Shayegh, "Fabrication of various compositions of NiTi thin films by Electron Beam PVD on silicon wafers", Metallurgical Engineering Journal, No. ??, 1386, 2007, pp ??-??.

• A. Rasuli and K. Sadrnezhad, "Simulation of the Rate of Gas-Solid (Nonporous) by use of Mazet Model", Journal Department of Engineering of University of Tabriz, No. 39, pp 37-49.

 

 

MORE