Peer-reviewed ISI-WoS journal papers-part3

30. M. Pouranvari, "Influence of welding parameters on peak load and energy absorption of dissimilar resistance spot welds of DP600 and AISI 1008 steels, Canadian Metallurgical Quarterly, 50 (2011), 381-388.
29. M. Pouranvari, S. P. H. Marashi, " Dissimilar Spot Welds of AISI 304/AISI 1008: Metallurgical and Mechanical Characterization ", Steel Research International, 82 (2011),1355-1361.
28. M. Pouranvari, S. P. H. Marashi, " Failure mode transition in AHSS resistance spot welds, Part I: controlling factors", Materials Science and Engineering A, 528 (2011), 8337-8343.
27. M. Pouranvari, S. P. H. Marashi, D. S. Safanama, " Failure mode transition in AHSS resistance spot welds. Part II: Experimental investigation and model validation, Materials Science and Engineering: A, 528(2011), 8344-8352.
26. M. Pouranvari, S. P. H. Marashi and S. M. Mousavizadeh, " Dissimilar resistance spot welding of DP600 dual phase and AISI 1008 low carbon steels: correlation between weld microstructure and mechanical properties ", Ironmaking and Steelmaking, 38 (2011), 471-480.
25. M. Pouranvari, S. P. H. Marashi, "Critical sheet thickness for weld nugget growth during resistance spot welding of three steel sheets", Science and Technology of Welding and Joining, 16 (2011), 162-165.
24. M. Pouranvari, S. M. Mousavizadeh, S. P. H. Marashi, M.Goodarzi, M. Ghorbani, " Influence of fusion zone size and failure mode on mechanical performance of dissimilar resistance spot welds of AISI 1008 low carbon and advanced high strength DP600 steels", Materials and Design, (2011) 1390–1398.
23. A. Tavasolizadeh, S.P.H Marashi, M. Pouranvari, "Mechanical performance of three thickness resistance spot welded low carbon steel", Materials Science and Technology, 27(2011), 219-224.
22. F. Nikoosohbat, SH. Kheirandish, M. Goodarzi, M. Pouranvari and S.P.H. Marashi, "Microstructure and Failure Behavior of Resistance Spot Welded DP980 Dual Phase Steel", Materials Science and Technology, 26 (2010), 738-744.
21. M. Pouranvari, S. P. H. Marashi, S. M. Mousavizadeh, "Failure mode transition and mechanical properties of similar and dissimilar resistance spot welds of DP600 and low carbon steels", Science and Technology of Welding and Joining, 15 (2010),625-631.
20. M. Masoumi, S.P.H. Marashi, M. Pouranvari, "Metallurgical and Mechanical characterization of laser spot welded low carbon steel sheets", Steel Research International, 81 (2010),1144-1150.
19. M. Pouranvari, S. P. H. Marashi, "Key factors influencing mechanical performance of dual phase steel resistance spot welds", Science and Technology of Welding and Joining, 15(2010), 149-155. (Most cited in STWJ)
18. M. Pouranvari and S. P. H. Marashi, "Minimum Fusion Zone Size Required to Ensure Pullout Failure Mode of Resistance Spot Welds During Tensile-Shear Test", Kovove Materialy, 48(2010), 197–202.
17. M. Pouranvari, S. P. H. Marashi, "On the failure of low carbon steel resistance spot welds in quasi-static tensile–shear loading", Materials and Design, 31 (2010) 3647–3652.
16. M. Pouranvari, "On the weldability of grey cast iron using nickel based filler metal", Materials and Design, 31 (2010) 3253–3258.
15. M. Pouranvari, S.P.H Marashi, "Factors affecting mechanical properties of resistance spot welds", Materials Science and Technology, 26 (2010), 1137-.1144.
14. S. P. H. Marashi, M. Pouranvari, M. Salehi, A. Abedi, S. Kaviani, "Overload Failure Behavior of Dissimilar Thickness Resistance Spot Welds during Tensile-Shear Test", Materials Science and Technology, 26 (2010), 1220-1225.
13. M. Pouranvari, S.P.H. Marashi, "Similar and dissimilar RSW of low carbon and austenitic stainless steels: effect of weld microstructure and hardness profile on failure mode", Materials Science and Technology, 25 (2009), 1411-1416.
12. M. Pouranvari, A. Ekrami, A. H. Kokabi, " Effect of bonding temperature on microstructure development during TLP bonding of a nickel base superalloy", Journal of Alloys and Compounds, 469 (2009),270-275.
11. P. Movahed, S. Kolahgar, S.P.H. Marashi, M. Pouranvari, N. Parvin, "The effect of intercritical heat treatment temperature on the tensile properties and work hardening behavior of ferrite–martensite dual phase steel sheets", Materials Science and Engineering A, 518 (2009), 1-6.
10. M. Goodarzi, S.P.H. Marashi, M. Pouranvari, "Dependence of overload performance on weld attributes for resistance spot welded galvanized low carbon steel", Journal of Materials Processing and Technology, 209(2009):4379-4384.
9. S. H. Hashemi, D. Mohammadyani, M. Pouranvari, S. M. Mousavizadeh, "On the relation of microstructure and impact toughness characteristics of SAW steel of grade API X70", Fatigue and Fracture of Engineering Materials and Structures, 32 (2009), 33-40.
8. R. Ashiri, B. Niroumand, F. Karimzadeh, M. Hamani, M. Pouranvari, "Effect of casting process on microstructure and tribological behavior of LM13 alloy", Journal of Alloys and Compounds, 475 (2009) pp. 321-327.
7. P. Marashi, M. Pouranvari, S. M. H. Sanaee, A. Abedi, H.Abootalebi, M. Goodarzi," Relationship between Failure Behavior and Weld Fusion Zone Attributes of Austenitic Stainless Steel Resistance Spot Welds" Material Science and Technology, 24 (2008), 1506-1512.
6. P. Marashi, M. Pouranvari, S. Amirabdollahian, A. Abedi, M. Goodarzi, "Microstructure and failure behaviour of dissimilar resistance spot welds between austenitic stainless and galvanized low carbon steels", Materials Science and Engineering A, 480 (2008),175-180.
5. M. Pouranvari, A. Ekrami, A. H. Kokabi, "Microstructure- Properties Relationship of TLP bonded GTD-111 Nickel Base Superalloy", Materials Science and Engineering A, 490(2008), 229-234.
4. M. Pouranvari, A. Ekrami, A. H. Kokabi, “Microstructure development during transient liquid phase bonding of GTD-111 nickel-based superalloy" Journal of alloys Compounds, 461(2008), 641-647.
3. M. Pouranvari, A. Abedi, P. Marashi, M. Goudarzi, "Effect of expulsion on peak load and energy absorption of low carbon resistance spot welds", Science and Technology of Weldingand Joining, 13(2008), 39-43.
2. M. Pouranvari, H. R. Asgari, S. M. Mosavizade, P. Marashi, M. Goudarzi, " Effect of weld nugget size on overload failure mode of resistance spot welds " Science and Technology of Welding and Joining, 12(2007),217-225. (Most cited in STWJ)
1. S. M. Mousavi zadeh Noughabi, K. Dehghani, M. Pouranvari, "Failure analysis of automatic coupler SA-3 in railway carriages" Engineering Failure Analyses, 14 (2007) 903–912.


Write a comment...

Name
E-mail
Comment