WELCOME

Sharif University of Technology

Department of Materials Science and Engineering

 

Dr. Mohsen Kazeminezhad

Professor

Address: Dept. of Materials Science and Engineering

Sharif University of Technology

Azadi Avenue,

P.O. Box: 11155-9466

Tehran, Iran

 E-mail: mkazemi@sharif.edu

                                                               Tel:  +98 21 66165227

                                                               Fax: +98 21 66005717

 

Education

·        Ph.D. in Materials Science and Engineering, Metal Forming, Sharif University of Technology, Tehran, Iran, 2002 -2006.

·        Visiting Fellow in School of Mechanics, Materials and Mechatronics, University of Wollongong, Wollongong, Australia, 2005 -2006.

·        M.Sc. in Materials Science and Engineering, Metal Forming, Sharif University of Technology, Tehran, Iran, 2000 -2002.

·        B.Sc. in Materials Science and Engineering, Metal Forming, Sharif University of Technology, Tehran, Iran, 1996 -2000.

 

Research Interests

·        Simulation and Analysis of Metal Forming Processes using Finite Element Method

·        Simulation of Microstructure/Nano-Structure using Monte Carlo Model

·        Severe Plastic Deformation (Microstructure/Nano-structure / Mechanical properties / modeling)

·        Thermomechanical

·        Strain Aging

 

Teaching courses

     (Computational Materials Science)

 

ISI Journal Papers

 

Modeling of the mutual effect of dynamic precipitation and dislocation density in age hardenable aluminum alloys

SK Moghanaki, M Kazeminezhad

Journal of Alloys and Compounds 683, 527-532, 2016

2016

Microstructural evolution during ultra-rapid annealing of severely deformed low-carbon steel: strain, temperature, and heating rate effects

MA Mostafaei, M Kazeminezhad

International Journal of Minerals, Metallurgy, and Materials 23 (7), 779-792, 2016

2016

Energy absorption of friction stir welded 1050 aluminum sheets through wedge tearing

M Amiri, M Kazeminezhad, AH Kokabi

Materials & Design 93, 216-223, 2016

2016

Effect of Starting Microstructure through Severe Plastic Deformation and UltraRapid Annealing of LowCarbon Steel

MA Mostafaei, M Kazeminezhad

steel research international, 2016

2016

Surrogate-based Pareto optimization of annealing parameters for severely deformed steel

H Ghiabakloo, K Lee, M Kazeminezhad, BS Kang

Materials & Design 92, 1062-1069, 2016

2016

Microstructure and mechanical properties improvement by ultra-rapid annealing of severely deformed low-carbon steel

MA Mostafaei, M Kazeminezhad

Materials Science and Engineering: A 655, 229-236, 2016

2016

Modelling the temperature rise effect through high-pressure torsion

H Parvin, M Kazeminezhad

Materials Science and Technology, 1-5, 2016

2016

The Correlation of Stir Zone Texture Development with Base Metal Texture and Tool-Induced Deformation in Friction Stir Processing of Severely Deformed Aluminum

MS Khorrami, M Kazeminezhad, Y Miyashita, AH Kokabi

Metallurgical and Materials Transactions A, 1-10, 2016

2016

Multi Directional Forging of 2024 Al Alloy After Different Heat Treatments: Microstructural and Mechanical Behavior

S Asadi, M Kazeminezhad

Transactions of the Indian Institute of Metals, 1-13, 2016

2016

Friction stir butt welding of Al-Cu bilayer laminated composites: analysis of force, torque, and temperature

R Beygi, M Kazeminezhad, MZ Mehrizi, A Loureiro

The International Journal of Advanced Manufacturing Technology, 1-8, 2016

2016

Dependency modeling of steady state grain size on the stacking fault energy through severe plastic deformation

H Parvin, M Kazeminezhad

Materials Letters 159, 410-412, 2015

2015

Two-internal variable thermodynamics modelling of severe plastic deformation: dislocation and flow stress evolutions

H Parvin, M Kazeminezhad

Materials Science and Technology 31 (14), 1788-1793, 2015

2015

Thermal stability of aluminum after friction stir processing with SiC nanoparticles

MS Khorrami, M Kazeminezhad, AH Kokabi

Materials & Design 80, 41-50, 2015

2015

Effects of heat input in friction stir welding on microstructure and mechanical properties of AA3003-H18 plates

B Abnar, M Kazeminezhad, AH Kokabi

Transactions of Nonferrous Metals Society of China 25 (7), 2147-2155, 2015

2015

Microstructure and mechanical properties of an Al–Mg–Si tube processed by severe plastic deformation and subsequent annealing

MH Farshidi, M Kazeminezhad, H Miyamoto

Materials Science and Engineering: A 640, 42-50, 2015

2015

Metallurgical characteristics and failure mode transition for dissimilar resistance spot welds between ultra-fine grained and coarse-grained low carbon steel sheets

F Khodabakhshi, M Kazeminezhad, AH Kokabi

Materials Science and Engineering: A 637, 12-22, 2015

2015

Friction Stir Welding of Al-Cu Bilayer Sheet by Tapered Threaded Pin: Microstructure, Material Flow, and Fracture Behavior

R Beygi, M Kazeminezhad, AH Kokabi, A Loureiro

Metallurgical and Materials Transactions A 46 (6), 2544-2553, 2015

2015

Influence of stored strain on fabricating of Al/SiC nanocomposite by friction stir processing

MS Khorrami, M Kazeminezhad, AH Kokabi

Metallurgical and Materials Transactions A 46 (5), 2021-2034, 2015

2015

The Effect of Premixed Al-Cu Powder on the Stir Zone in Friction Stir Welding of AA3003-H18

B Abnar, M Kazeminezhad, AH Kokabi

Journal of Materials Engineering and Performance 24 (2), 1086-1093, 2015

2015

The effects of die geometry in tube channel pressing: Severe plastic deformation

MH Farshidi, M Kazeminezhad

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of ..., 2015

2015

Development a dislocation density based model considering the effect of stacking fault energy: Severe plastic deformation

H Parvin, M Kazeminezhad

Computational Materials Science 95, 250-255, 2014

2014

Microstructrual evolution of aluminum 6061 alloy through tube channel pressing

MH Farshidi, M Kazeminezhad, H Miyamoto

Materials Science and Engineering: A 615, 139-147, 2014

2014

Static Strain Aging Behavior of Low Carbon Steel Drawn Wire

M Kazeminezhad, Y Khaledzadeh, A Karimi Taheri

Iranian Journal of Materials Forming 1, 44-51, 2014

2014

Effects of cold severe plastic deformation and heating on dendritic and non-dendritic structures: A356 alloy

A Dodangeh, M Kazeminezhad, H Aashuri

International Journal of Cast Metals Research 27 (5), 312-320, 2014

2014

Microstructure and mechanical properties in dissimilar butt friction stir welding of severely plastic deformed aluminum AA 1050 and commercially pure copper sheets

H Barekatain, M Kazeminezhad, AH Kokabi

Journal of Materials Science & Technology 30 (8), 826-834, 2014

2014

The Effect of Cu Powder During Friction Stir Welding on Microstructure and Mechanical Properties of AA3003-H18

B Abnar, M Kazeminezhad, AH Kokabi

Metallurgical and Materials Transactions A 45 (9), 3882-3891, 2014

2014

Differential scanning calorimetry study of constrained groove pressed low carbon steel: recovery, recrystallisation and ferrite to austenite phase transformation

F Khodabakhshi, M Kazeminezhad

Materials Science and Technology 30 (7), 765-773, 2014

2014

The effect of SiC nanoparticles on the friction stir processing of severely deformed aluminum

MS Khorrami, M Kazeminezhad, AH Kokabi

Materials Science and Engineering: A 602, 110-118, 2014

2014

Influence of Tool Geometry and Contact Condition on Friction Stir Welding of Al-Cu Laminated Composites

R Beygi, M Kazeminezhad, AH Kokabi, S Alvani, D Verdera, A Loureiro

Advanced Materials Research 856, 16-21, 2014

2014

On the failure behavior of highly cold worked low carbon steel resistance spot welds

F Khodabakhshi, M Kazeminezhad, AH Kokabi

Metallurgical and Materials Transactions A 45 (3), 1376-1389, 2014

2014

Modeling of dislocation density and strength on rheoforged A356 alloy during multi-directional forging

J Kavosi, M Saei, M Kazeminezhad, A Dodangeh

Computational Materials Science 81, 284-289, 2014

2014

Microstructural Evolution and Fracture Behavior of Friction-Stir-Welded Al-Cu Laminated Composites

R Beygi, M Kazeminezhad, AH Kokabi

Metallurgical and Materials Transactions A 45 (1), 361-370, 2014

2014

The effect of direct and cross-rolling on mechanical properties and microstructure of severely deformed aluminum

KR Mamaghani, M Kazeminezhad

Journal of materials engineering and performance 23 (1), 115-124, 2014

2014

Prediction of the mechanical properties of rods after cold forging and heat treatment

M Kazeminezhad

The International Journal of Advanced Manufacturing Technology 69 (9-12 ..., 2013

2013

On the natural aging behavior of Aluminum 6061 alloy after severe plastic deformation

MH Farshidi, M Kazeminezhad, H Miyamoto

Materials Science and Engineering: A 580, 202-208, 2013

2013

Thermal stability during annealing of friction stir welded aluminum sheet produced by constrained groove pressing

MS Khorrami, M Kazeminezhad, AH Kokabi

Materials & Design 45, 222-227, 2013

2013

Analyses on the flow stress of an Al-Mg alloy during dynamic recovery

MA Mostafaei, M Kazeminezhad

Journal of materials engineering and performance 22 (3), 700-705, 2013

2013

Dislocation density and flow stress modeling of nanostructured Al–SiC p composite during accumulative roll bonding

J Kavosi, M Saei, M Kazeminezhad

Computational Materials Science 67, 359-363, 2013

2013

Severe plastic deformation of 6061 aluminum alloy tube with pre and post heat treatments

MH Farshidi, M Kazeminezhad, H Miyamoto

Materials Science and Engineering: A 563, 60-67, 2013

2013

Butt joining of Al–Cu bilayer sheet through friction stir welding

R Beygi, M Kazeminezhad, AH Kokabi

Transactions of Nonferrous Metals Society of China 22 (12), 2925-2929, 2012

2012

Severe plastic deformation of rheoforged aluminum alloy A356

A Dodangeh, M Kazeminezhad, H Aashuri

Materials Science and Engineering: A 558, 371-376, 2012

2012

Deformation Behavior of 6061 Aluminum Alloy Through Tube Channel Pressing: Severe Plastic Deformation

MH Farshidi, M Kazeminezhad

Journal of materials engineering and performance 21 (10), 2099-2105, 2012

2012

Microstructure evolutions after friction stir welding of severely deformed aluminum sheets

MS Khorrami, M Kazeminezhad, AH Kokabi

Materials & Design 40, 364-372, 2012

2012

Resistance spot welding of ultra-fine grained steel sheets produced by constrained groove pressing: Optimization and characterization

F Khodabakhshi, M Kazeminezhad, AH Kokabi

Materials Characterization 69, 71-83, 2012

2012

Computation on new deformation routes of tube channel pressing considering back pressure and friction effects

A Zangiabadi, M Kazeminezhad

Computational Materials Science 59, 174-181, 2012

2012

Modeling of austenite to ferrite transformation

M Kazeminezhad

Bulletin of Materials Science 35 (3), 395-398, 2012

2012

A novel approach to find the kinetics of dynamic recovery based on hot flow curves

MA Mostafaei, M Kazeminezhad

Materials Science and Engineering: A 544, 88-91, 2012

2012

Mechanical properties of severely plastic deformed aluminum sheets joined by friction stir welding

MS Khorrami, M Kazeminezhad, AH Kokabi

Materials Science and Engineering: A 543, 243-248, 2012

2012

A modified model on solute alloying element effect in Al–Mg alloys: Mechanical properties and dislocation density evolutions

SS Firouzabadi, M Kazeminezhad

Materials & Design 36, 804-808, 2012

2012

Hot deformation behavior of hot extruded Al–6Mg alloy

MA Mostafaei, M Kazeminezhad

Materials Science and Engineering: A 535, 216-221, 2012

2012

Work hardening and mechanical properties of severely deformed AA3003 by constrained groove pressing

F Khakbaz, M Kazeminezhad

Journal of Manufacturing Processes 14 (1), 20-25, 2012

2012

Strain rate sensitivity and fracture behavior of severely deformed Al–Mn alloy sheets

F Khakbaz, M Kazeminezhad

Materials Science and Engineering: A 532, 26-30, 2012

2012

Microstructure evolutions after friction stir welding of severely deformed aluminum sheets

M Sarkari Khorrami, M Kazeminezhad, AH Kokabi

Materials and Design 40, 364, 2012

2012

Mechanical properties and microstructure of resistance spot welded severely deformed low carbon steel

F Khodabakhshi, M Kazeminezhad, AH Kokabi

Materials Science and Engineering: A 529, 237-245, 2011

2011

Tearing energy of an annealed bilayer sheet through multiple and single tensile tests

R Beygi, M Kazeminezhad

Materials Science and Engineering: A 528 (29), 8800-8803, 2011

2011

Microstructure generation of severely deformed materials using voronoi diagram in laguerre geometry: Full algorithm

R Jafari, M Kazeminezhad

Computational Materials Science 50 (9), 2698-2705, 2011

2011

The effect of constrained groove pressing on grain size, dislocation density and electrical resistivity of low carbon steel

F Khodabakhshi, M Kazeminezhad

Materials & Design 32 (6), 3280-3286, 2011

2011

The annealing phenomena and thermal stability of severely deformed steel sheet

F Khodabakhshi, M Kazeminezhad

Materials Science and Engineering: A 528 (15), 5212-5218, 2011

2011

Development of a novel severe plastic deformation method for tubular materials: Tube Channel Pressing (TCP)

A Zangiabadi, M Kazeminezhad

Materials Science and Engineering: A 528 (15), 5066-5072, 2011

2011

Implementation of a constitutive model in finite element method for intense deformation

E Hosseini, M Kazeminezhad

Materials & Design 32 (2), 487-494, 2011

2011

A new microstructural model based on dislocation generation and consumption mechanisms through severe plastic deformation

E Hosseini, M Kazeminezhad

Computational Materials Science 50 (3), 1123-1135, 2011

2011

Effect of Post Annealing Treatment on Nano-Structured Low Carbon Steel Sheets Processed by Constrained Groove Pressing

F Khodabakhshi, M Kazeminezhad, M Azarnush, SH Miran

Materials Science Forum 667, 1009-1014, 2011

2011

Energy absorption mechanism of Al–steel bilayer sheets produced by cold roll welding during wedge tearing

R Beygi, M Kazeminezhad

International Journal of Mechanical Sciences 52 (12), 1613-1619, 2010

2010

The effects of annealing phenomena on the energy absorption of roll-bonded Al–steel sheets during wedge tearing

R Beygi, M Kazeminezhad

Materials Science and Engineering: A 527 (27), 7329-7333, 2010

2010

Constrained groove pressing of low carbon steel: nano-structure and mechanical properties

F Khodabakhshi, M Kazeminezhad, AH Kokabi

Materials Science and Engineering: A 527 (16), 4043-4049, 2010

2010

Modeling of induced empirical constitutive relations on materials with FCC, BCC, and HCP crystalline structures: severe plastic deformation

M Kazeminezhad, E Hosseini

The International Journal of Advanced Manufacturing Technology 47 (9-12 ..., 2010

2010

Integration of physically based models into FE analysis: homogeneity of copper sheets under large plastic deformations

E Hosseini, M Kazeminezhad

Computational Materials Science 48 (1), 166-173, 2010

2010

Optimum groove pressing die design to achieve desirable severely plastic deformed sheets

M Kazeminezhad, E Hosseini

Materials & Design 31 (1), 94-103, 2010

2010

A Dislocation-Based Model Considering Free Surface Theory Through HPT Process: Nano-Structured Ni

E Hosseini, M Kazeminezhad

SCIENTIA IRANICA 17 (1), 52-59, 2010

2010

ETMB model investigation of flow softening during severe plastic deformation

E Hosseini, M Kazeminezhad

Computational Materials Science 46 (4), 902-905, 2009

2009

Influence of deformation during T10 treatment on microstructure/hardness/electrical conductivity of Cu–Cr alloy produced in nonprotected atmosphere

E Hosseini, A Habibollahzadeh, M Erfanmanesh, H Mostajabodave, ...

Materials Science and Technology 25 (10), 1283-1288, 2009

2009

The effects of intermediate and post-annealing phenomena on the mechanical properties and microstructure of constrained groove pressed copper sheet

E Rafizadeh, A Mani, M Kazeminezhad

Materials Science and Engineering: A 515 (1), 162-168, 2009

2009

On the evolution of flow stress during constrained groove pressing of pure copper sheet

E Hosseini, M Kazeminezhad, A Mani, E Rafizadeh

Computational Materials Science 45 (4), 855-859, 2009

2009

Dislocation structure and strength evolution of heavily deformed tantalum

E Hosseini, M Kazeminezhad

International Journal of Refractory Metals and Hard Materials 27 (3), 605-610, 2009

2009

A comparison of low carbon steel and Al–Mg alloy sheets in quasi-static tearing collisions

M Kazeminezhad

Materials & Design 30 (4), 1333-1336, 2009

2009

Stress-based model on work hardening and softening of materials at large strains: corrugation process of sheet

E Hosseini, M Kazeminezhad

Journal of materials science 44 (5), 1212-1218, 2009

2009

A hybrid model on severe plastic deformation of copper

E Hosseini, M Kazeminezhad

Computational Materials Science 44 (4), 1107-1115, 2009

2009

Modeling nano-scale grain growth of intermetallics

M Kazeminezhad

Bulletin of Materials Science 32 (1), 19-21, 2009

2009

Combination of the upper bound and potts models for simulation of microstructure in wire drawing and annealing processes

M Kazeminezhad

Journal of materials engineering and performance 18 (1), 26-31, 2009

2009

The effect of ECAP die shape on nano-structure of materials

E Hosseini, M Kazeminezhad

Computational Materials Science 44 (3), 962-967, 2009

2009

Monte Carlo simulation of recrystallization with hardness input of cold worked metal

M Kazeminezhad

Materials Science and Engineering: A 496 (1), 389-392, 2008

2008

Coupling kinetic dislocation model and Monte Carlo algorithm for recrystallized microstructure modeling of severely deformed copper

M Kazeminezhad, E Hosseini

Journal of materials science 43 (18), 6081-6086, 2008

2008

Simulation the ultra-fine microstructure evolution during annealing of metal processed by ECAP

M Kazeminezhad

Computational Materials Science 43 (2), 309-312, 2008

2008

On the modeling of the static recrystallization considering the initial grain size effects

M Kazeminezhad

Materials Science and Engineering: A 486 (1), 202-207, 2008

2008

The effect of 3D and 2D deformations on flattened wires

M Kazeminezhad, AK Taheri

Journal of Materials Processing Technology 202 (1), 553-558, 2008

2008

A study on the cross-sectional profile of flat rolled wire

M Kazeminezhad, AK Taheri, AK Tieu

Journal of materials processing technology 200 (1), 325-330, 2008

2008

Relationship between the stored energy and indentation hardness of copper after compression test: models and measurements

M Kazeminezhad

Journal of materials science 43 (10), 3500-3504, 2008

2008

A study on the computation of the redundant deformation factor in wire drawing of austenitic 304 stainless steel

M Kazeminezhad

journal of materials processing technology 199 (1), 230-233, 2008

2008

Deformation inhomogeneity in flattened copper wire

M Kazeminezhad, AK Taheri

Materials & design 28 (7), 2047-2053, 2007

2007

Modeling the effect of redundant strain factor on the microstructure inhomogeneity of drawn and annealed wire

M Kazeminezhad

Journal of Computer-Aided Materials Design 14 (3), 435-446, 2007

2007

Utilization of the finite element and Monte Carlo model for simulating the recrystallization of inhomogeneous deformation of copper

M Kazeminezhad, AK Taheri, AK Tieu

Computational materials science 38 (4), 765-773, 2007

2007

The prediction of macroscopic shear bands in flat rolled wire using the finite and slab element method

M Kazeminezhad, AK Taheri

Materials letters 60 (27), 3265-3268, 2006

2006

Computer simulation of the effect of post annealing parameters on the microstructure inhomogeneity of the non-uniformly deformed copper

M Kazeminezhad, AK Taheri, AK Tieu

Journal of computer-aided materials design 13 (1-3), 221-232, 2006

2006

Applicability of the FSEM for analyzing wire flat rolling process

M Kazeminezhad, A Karimi Taheri

Engineering computations 23 (5), 515-524, 2006

2006

Calculation of the rolling pressure distribution and force in wire flat rolling process

M Kazeminezhad, AK Taheri

Journal of materials processing technology 171 (2), 253-258, 2006

2006

A theoretical and experimental investigation on wire flat rolling process using deformation pattern

M Kazeminezhad, AK Taheri

Materials & design 26 (2), 99-103, 2005

2005

An experimental investigation on the deformation behavior during wire flat rolling process

M Kazeminezhad, AK Taheri

Journal of Materials Processing Technology 160 (3), 313-320, 2005

2005

Prediction of ferrite grain size and tensile properties of a low carbon steel

M Kazeminezhad, A Karimi Taheri

Materials science and technology 20 (1), 106-110, 2004

2004

The effect of controlled cooling after hot rolling on the mechanical properties of a commercial high carbon steel wire rod

M Kazeminezhad, AK Taheri

Materials & design 24 (6), 415-421, 2003

2003