HAMID REZA MADAAH HOSSEINI

 

 

Professor

 

Materials Science and Engineering Department

Sharif University of Technology

Azadi Ave., Tehran, Iran

Tel: +98 (21) 66022721
Fax: +98 (21) 66005717
E-mail:
madaahATsharif.edu

 

 

 

EDUCATIONAL BACKGROWND

 

1.      Ph.D. in Materials Science and Engineering, Materials Science and Engineering Department, Sharif University of Technology, Tehran, Iran, July 2000, Area of Specialization: Advanced Materials.

 

2.      M.Sc. in Materials Science and Engineering, Materials Science and Engineering Department, Sharif University of Technology, Teheran, Iran, 1994, Area of Specialization: Characterization and Selection of Engineering Materials.

 

3.      B.Sc. in Materials Science and Engineering, Faculty of Materials Science and Engineering, Engineering Department, Shiraz University, 1991, Area of Specialization: Metal Forming.

 

 

WORK EXPERIENCE

 

1.      President of Sharif International campus in Tehran, Feb. 2013- Present.

 

2.      Dean of Extended Studies, Sharif University of Technology, Dec. 2010- Present.

 

3.      Professor of Materials Science and Engineering, Sharif University of Technology, Oct. 2009- Present.

 

4.      Associate Professor of Materials Science and Engineering, Sharif University of Technology, Sept. 2005- Oct. 2009.

 

5.      Assistant Professor of Materials Science and Engineering, Sharif University of Technology, Feb. 2001-Sept. 2005.

 

6.      Dean of Human Resources and Logistics, Sharif University of Technology, Dec. 2008-Dec. 2010.

 

7.      Vice-Chair for Student Affairs, Materials Science and Engineering Department, Sharif University of Technology, Sep. 2007- 2008.

 

8.      Vice-Chair for Research Affairs, Materials Science and Engineering Department, Sharif University of Technology, Sep. 2004- 2007.

 

 

AWARDS and HONORS

 

o   Scholarship of Iranian Ministry of Science, Research and Technology, 1996-2000.

 

o   Selected by the Vice-President of Research Affairs Committee of Sharif University of Technology for the best researcher's Award, 2006.

 

o   Selected by the Vice-President of Academic Affairs Committee of Sharif University of Technology for the best Professor's Award, 2007.

 

o   Member of Identifying and Guidance Commission, Iranian National Elite Foundation, 2011-Present.

 

o   Chair of Sixth International Conference on Nanostructures (ICNS6).

 

 

RESEARCH EXPERIENCE

 

1.      Doctoral Research (Excellent Degree): Materials Science and Engineering Department, Sharif University of Technology, 1995-2000: Modification of Nd-Fe-B-Type Sintered Magnets Using a Binary Powder Blending Technique.

 

2.      Master in Science Research: Materials Science and Engineering Department, Sharif University of Technology, 1992-1994: Cold Roll Bonding of 5754 Aluminum Alloy.

 

3.      Recent Industrial Researches:

 

o      Development of new magnetic materials based on nanotechnology (USPIO, SMC's, Soft and Hard Ferrites, Garnets, Fe-Si and Nd-Fe-B materials)

o      Development of New Al/Al3Ti Nano Composites.

o      Production of novel Superparamagnetic Nanoparticles as MRI contrast agent.

 

4.      Supervisor:

 

Ø Recent M. Sc. Thesis

 

o   Microemulsion synthesize of Fe3O4/TiO2 core-shell nanoparticles

o   Microstructure and mechanical properties of nanostructured Al-20Si-5Fe-2Ni alloy synthesized by mechanical alloying and rapid solidification processes

o   Effect of Titanium and Titanium compounds on H-Kinetics of Nanostructured Magnesium hydride

o   Evaluation of Thermoplastic starch/Polycaprolactone/Hydroxyapatite nanobiocomposite for bone tissue engineering applications

o   Characterization of double step hot pressed Al-Al3Ti insitu composites

o   Synthesis and characterization of novel colloidal superparamagnetic iron oxide nanoparticles via microemulsion (reverse micelle) method as MRI contrast agents

o   Synthesis and biological evaluation of magnetic colloids of ultra small superparamgnetic manganese-doped iron oxide nanoparticles for biomedical applications

o   Synthesis and biological evaluation of superparamgnetic Iron oxide nanoparticles for medical imaging applications

 

Ø Recent Ph. D. Thesis

 

o   Design and synthesis of novel colloidal superparamagnetic iron oxide nanoparticles via a modified coprecipitation route as MRI contrast agent

o   Synthesis of metallic alloy magnetic nanoparticles for hyperthermia treatment

o   Solvothermal synthesis and characterization of TiO2 nanoparticles for drug delivery and cancer therapy

o   Investigation of nanocrystallization kinetics, microstructure and magnetic properties of Finemet-type alloys

o   Microstructure Optimization of insitu Al-Al3Ti nanocomposite fabricated by Mechanical alloying & hot extrusion for improving the Toughness

o   Synthesis and characterization of nano-composite lead-free solders

o   Heat affected zone properties in submerged tandem arc welding of X80 micro alloy steel

o   Study of growth mechanism of ZnO nanorods in chemical vapor transport and condensation (CVTC) process

 

RESEARCH INTERESTS

 

Ø  Nanomaterials

Ø  Biomaterials

Ø  Magnetic Materials

Ø  Selection and Design of Engineering Materials

Ø  Novel Joining Processes

 

TEACHING EXPERIENCE

 

1. Lecturer for undergraduate students: Materials Science and Engineering Department, Sharif University of Technology, Tehran, Iran:

o   Fundamentals of Materials Science and Engineering

o   Advanced Materials

o   Selection of Materials in Engineering Design

 

2. Lecturer for postgraduate students: Materials Science and Engineering Department, Sharif University of Technology, Tehran, Iran:

o   Advanced Magnetic Materials

o   Advanced Physical Properties of Materials

o   Nanomaterials

o   Brazing and Soldering

 

LANGUAGE ABILITY

 

1. Persian: Mother tongue

 

2. English: good in verbal and written communication skills

 

 

PUBLICATIONS AND PRESENTATIONS (English)

 

Ø  Journal Papers (English):

 

1.      Abolfazl Azarniya, Hamid Reza Madaah Hosseini, A new method for fabrication of in situ Al/Al3Ti-Al2O3 nanocomposites based on thermal decomposition of nanostructured tialite, Journal of Alloys and Compounds, 2015, 643, 64-73.

2.      T. Gheiratmand, H. R. Madaah Hosseini, P. Davami, G. ababei, M. Song, Mechanism of Mechanically Induced Nanocrystallization of Amorphous FINEMET Ribbons During Milling, Metallurgical and Materials Transactions A, 2015, 46, 2718-2725.

3.      Abolfazl Azarniya, Amin Azarniya, Hamid Reza Madaah Hosseini, Abdolreza Simchi, Nanostructured aluminium titanate (Al 2 TiO 5) particles and nanofibers: Synthesis and mechanism of microstructural evolution, Materials Characterization, 2015, 103, 125-132.

4.      Parisa Vahdatkhah, Hamid Reza Madaah Hosseini, Azin Khodaei, Ali Reza Montazerabadi, Rasoul Irajirad, Mohamad Ali Oghabian, Hamid Delavari H, Rapid microwave-assisted synthesis of PVP-coated ultrasmall gadolinium oxide nanoparticles for magnetic resonance imaging, Chemical Physics, 2015, 453, 35-41.

5.      T. Gheiratmand, H. R. Madaah Hosseini, P. Davami, M. Gjoka, M. Song, The Effect of Mechanical Milling on the Soft Magnetic Properties of Amorphous FINEMET Alloy, Journal of Magnetism and Magnetic Materials, 2015, 381, 322-327.

6.      M. Daryani, A. Simchi, M. Sadati, H. R. Mdaah Hosseini, H. Targholizadeh, M. Khakbiz, Effects of Ti-based catalysts on hydrogen desorption kinetics of nanostructured magnesium hydride, International Journal of Hydrogen Energy, 2014, 39, 21007-21014.

7.      T. Gheiratmand, S. Mohammadi Siyani, H. R. Madaah Hosseini, P. Davami, Investigation the Structural and Magnetic Properties of FINEMET Type Alloy Produced by Mechanical Alloying, Advanced Materials Research, 2014, 970, 252-255.

8.      M. Mojaddami, M. R. Mohammadi, H. R. Madaah Hosseini, Improved Efficiency of Dye-Sensitized Solar Cells Based on a Single Layer Deposition of Skein-Like TiO2 Nanotubes, J. Am. Ceram. Soc., 2014, 1-7.

9.      S. Naghibi, H. R. Madaah Hosseini, M. A. Faghihi Sani, Mortality response of folate receptor-activated, PEG-functionalized TiO2 nanoparticles for doxorubicin loading with and without ultraviolet irradiation, Ceramics International, 2014, 40, 5481-5488.

10.  H. Asghari Shivaee, M. Samadi, H. Alihosseini, H. R. Madaah Hosseini, Nanocrystallization kinetics and magnetic properties of the melt spun amorphous (Fe0.5Co0.5)77Si11B9Cu0.6Nb2.4 alloy, Thermochemica ACTA, 2014, 575, 64-69.

11.  H. Omid, M. A. Oghabian, R. Ahmadi, N. Shahbazi, H. R. Madaah Hosseini, S. Shanehsazzadeh, R. Namivandi Zangeneh, Synthesizing and staining manganese oxide nanoparticles for cytotoxicity and cellular uptake investigation, Biochemica ET Biophysica ACTA-General Subjects, 2014, 1840, 428-433.

12.  S. Naghibi, H. R. Madaah Hosseini, M. A. Faghihi Sani, Application of the statistical Taguchi method to optimize TiO2 nanoparticles synthesis by the hydrothermal assisted sol-gel technique, Ceramics International, 2014, 40, 4193- 4201.

13.  T. Gheiratmand, H. R. Madaah Hosseini, P. Davami, M. Gjoka, G. Loizos, H. Aashuri, Effect of annealing on soft magnetic behavior of nanostructured (Fe0.5Co0.5)73.5Si13.5B9Nb3Cu1 ribbons, Journal of Alloys and Compounds , 2014, 582, 79-82.

14.  T. Gheiratmand, H. R. Madaah Hosseini, P. Davami, F. Ostadhossein, M. Song, M. Gjoka, On the effect of cooling rate during melt spinning of FINEMET ribbons, Nanoscale, 2013, 5, 7520-7527.

15.  H. Asghari Shivaee, A. Castellero, P. Rizzi, P. Tiberto, H. R. Madaah Hosseini, M. Baricco, Effects of Chemical Composition on Nanocrystallization Kinetics, Microstructure and Magnetic Properties of Finemet-TypeAmorphous Alloys, Metals and Materials Internasional, 2013, 19, 643-649.

16.  S. Naghibi, H. R. Madaah Hosseini, M. A. Faghihi Sani, Colloidal Stability of Dextran and Dextran/Poly Ethylene Glycol Coated TiO2 Nanoparticles by Hydrothermal Assisted Sol-Gel Method, Ceramics International, 2013, 39, 8377- 8384.

17.  H. DelavariH., H. R. Madaah Hosseini, M. Wolff, Modeling of self-controlling hyperthermia based on nickel alloy ferrofluids: Proposition of new nanoparticles, Journal of Magnetism and Magnetic Materials, 2013, 335, 59-63.

18.  R. Ahmadi, A. Masoudi, H. R. Madaah Hosseini, N. Gu, Kinetics of magnetite nanoparticles formation in a one step low temperature hydrothermal process, Ceramics International, 2013, 39, 4999-2005.

19.  Mahsa Jalali, Mehdi Sadegh Ahmadi, Farzaneh Yadaei, Mehdi Heidar Zadeh Azimi, Hamid Reza Madaah Hosseini, Enhancement of Benzine Combustion Behavior in Exposure to the Magnetic Field, Journal of Clean Energy Technologies, 2013, 1 (3) 224-227.

20.  R. Ahmadi, H. R. Madaah Hosseini, A. Masoudi, H. Omid, R Namivandi-Zangeneh, M. Ahmadi, Z. Ahmadi, N. Gu, Effect of concentration on hydrodynamic size of magnetite-based ferrofluid as a potential MRI contrast agent, Colloids and Surfaces A: Physicochem. Eng. Aspects, 2013, 424, 113-117.

21.  R. Ahmadi, H. R. Madaah Hosseini, An investigation on the optimum conditions of synthesizing a magnetite based ferrofluid as MRI contrast agent using Taguchi method, Materials Science-Poland, 2013, 31(2) 253-258.

22.  A. Masoudi, H. R. Madaah Hosseini, S. M. Seyed Reyhani, M. A. Shokrgozar, M. A. Oghabian, R. Ahmadi, Long-term investigation on the phase stability, magnetic behavior, toxicity, and MRI characteristics of superparamagnetic Fe/Fe-oxide core/shell nanoparticles, Int J Pharm, 2012, 439, 28-40.

23.  A. Masoudi, H. R. Madaah Hosseini, M. A. Shokrgozar, R. Ahmadi, M. A. Oghabian, The effect of poly (ethylene glycol) coating on colloidal stability of superparamagnetic iron oxide nanoparticles as potential MRI contrast agent. Int J Pharm, 2012, 433 (1-2) 129-141.

24.  R. Ahmadi, H. R. Madaah Hosseini, A new approach for calculation of relaxation time and magnetic anisotropy of ferrofluids containing superparamagnetic nanoparticles. J. Min. Metall. Sect. B-Metall. 2012, 48 (1) 81-8.

25.  M. A. Oghabian, N. Gharehaghaji, A. Masoudi, S. Shanehsazzadeh, R. Ahmadi1, R. Faridi Majidi, H. R. Madaah Hosseini, Effect of Coating Materials on Lymph Nodes Detection Using Magnetite Nanoparticles. Adv. Sci. Eng. Med. 2012, 4(1) 1-9.

26.  R. Ahmadi, N. Gu, H. R. Madaah Hosseini, Characterization of Cysteine Coated Magnetite Nanoparticles as MRI Contrast Agent, Nano-Micro Lett. 2012, 4 (3), 180-183.

27.  S. Emami, H. R. Madaah Hosseini, A. Dolati, The Effect of Cationic and Anionic Surfactants on the Nanostructure and Magnetic Properties of Yttrium Iron Garnet (YIG) Synthesized by a Sol-Gel Auto Combustion Method, Russian Journal of Non-Ferrous Metals, 2012, 53(4) 308-314.

28.  T. Gheiratmand, H.R. Madaah Hosseini, Synthesis of FeNiCoTi Powder Alloy by Mechanical Alloying and Investigation of Magnetic and Shape Memory Properties, J Supercond Nov Magn, 2012, DOI 10.1007/s10948-012-1506-4.

29.  A. Roshanghias, A. H. Kokabi, Y. Miyashita, Y. Mutoh, I Ihara, R. G. Guan Fatt, H. R. Madaah-Hosseini, Nanoindentation Creep Behavior of Nanocomposite Sn-Ag-Cu Solders, J Electron Mater, 41, 8, 2012, 2057-206.

30.  Roshanghias, A. H. Kokabi, Y. Miyashita, Y. Mutoh, M. Rezayat, H. R. Madaah-Hosseini, Ceria reinforced nanocomposite solder foils fabricated by accumulative roll bonding process. J Mater Sci: Mater Electron, 2012, 23, 1698-1702.

31.  Roshanghias, A. H. Kokabi, Y. Miyashita, Y. Mutoh, H. R. Madaah Hosseini, Formation of intermetallic reaction layer and joining strength in nano-composite solder joint, J Mater Sci: Mater Electron, 2012, DOI 10.1007/s10854-012-0829-z.

32.  E. Memarzadeh Lotfabad, H. R. Madaah Hosseini, The effect of active screen plasma nitriding treatment on structural, mechanical and magnetic properties of nanocrystalline Finemet-type alloy, International Journal of Modern Physics: Conference Series, 2012, 5, 784-792.

33.  M. Hajfathalian, Z. A. Nemati, H. R. Madaah Hosseini, Evaluation of Nano Crystalline Ba(ZrxTi1-x )O3 Produced by Mechanical Alloying, International Journal of Modern Physics: Conference Series, 2012, 5, 472-479.

34.    R. Ahmadi, H. R. Madaah Hosseini, A. masoudi, Avrami behavior of magnetite nanoparticles formation in co-precipitation process. J. Min. Metall. Sect. B- Metall. 2011; 47 (2) 211-8.

35.   R. Ahmadi, M. Malek, H. R. Madaah Hosseini, M. A. Shokrgozar, M. A. Oghabian, A. Masoudi, N. Gu, Y. Zhang, Ultrasonic-assisted synthesis of magnetite based MRI contrast agent using cysteine as the biocapping coating. Materials Chemistry and Physics 2011, 131(1-2):170-177.

36.  H. Omid, H. R. Madaah Hosseini, Modeling for Superheating Phenomenon of Embedded Superfine Metallic Nanoparticles. Nanoscience and Nanotechnology, 2011, 1(2) 54-7.

37.  H. Delavari H., H. R. Madaah Hosseini, A. Simchi, Effects of particle size, shape and crystal structure on the formation energy of schottky vacancies in free-standing metal nanoparticles: A model study. Physica B: Condensed Matter, 2011,406(20) 3777-80.

38.   H. Omid, H. Delavari H., H. R. Madaah Hosseini, Melting enthalpy and entropy of freestanding metallic nanoparticles based on cohesive energy and average coordination number. Journal of Physical Chemistry C, 2011, 115(35) 17310-3.

39.  M. Movahedi, A. H. Kokabi, H. R. Madaah Hosseini. M. Kiani, Roll bonding behaviour of al-3003/Al-4043 and al-3003/Zn sheets. Metals and Materials International, 2011, 17(4) 665-70.

40.  H. Delavari H., H. R. Madaah Hosseini, A. Simchi, A simple model for the size and shape dependent curie temperature of freestanding ni and fe nanoparticles based on the average coordination number and atomic cohesive energy. Chem Phys, 2011, 383(1-3) 1-5.

41.  S. Moeinifar, A. H. Kokabi, H. R. Madaah Hosseini, Influence of Thermal Simulated and Real Tandem Submerged Arc Welding Process on the Microstructure and Mechanical Properties of the Coarse Grained Heat Affected Zone, Materials and Manufacturing Processes, 2011, DOI: 10.1080/10426914.2010.544827.

42.  S. Moeinifar, A. H. Kokabi, H. R. Madaah Hosseini, Role of tandem submerged arc welding thermal cycles on properties of the heat affected zone in X80 microalloyed pipe line steel. Journal of Materials Processing Technology, 2011, 211(3) 368-75.

43.   S. Moeinifar, A. H. Kokabi, H. R. Madaah Hosseini, Effect of tandem submerged arc welding process and parameters of Gleeble simulator thermal cycles on properties of the intercritically reheated heat affected zone. Materials and Design, 2011, 32(2) 869-76.

44.  A. Roshanghias, M. Barzegari, A.H. Kokabi, H.R. Madaah Hosseini, Welding Characteristics of Ultrahigh Strength Steel in Annealed and Quench-Tempered Conditions, Journal of Materials Engineering and Performance, 2010, 19, 7, 963-969.

45.  Hossein Asghari Shivaee , Ahmad Nozad Golikand, Hamid Reza Madaah Hosseini, Mehdi Asgari, Influence of annealing on the electrochemical behavior of finemet amorphous and nanocrystalline alloy, J Mater Sci, 2010, 45, 546-551.

46.  S. S. A. Meibod, P. Pourafshary, H. R. Madaah Hosseini, Study the effect of ultrasonic irradiation and surfactant/fe ions weight ratio on morphology and particle size of magnetite nanoparticles synthesised by co-precipitation for medical application. World Academy of Science, Engineering and Technology, 2010, 4(4), 376-379.

47.  A. R. Etemadi, P. Behjati, H. R. Madaah Hosseini, A. H. Kokabi. Failure analysis of brazed air passages of an aircraft fuel system. Eng Failure Anal, 2010, 17(6) 1495-9.

48.  S. Moeinifar, A. H. Kokabi, H. R. Madaah Hosseini, Influence of peak temperature during simulation and real thermal cycles on microstructure and fracture properties of the reheated zones. Materials and Design, 2010, 31(6) 2948-55.

49.  H. A. Shivaee, H. R. Madaah Hosseini. E. M. Lotfabad, S. Roostaie, Study of nanocrystallization in FINEMET alloy by active screen plasma nitriding. J Alloys Compounds, 2010, 491(1-2)487-94.

50.  E. Memarzadeh Lotfabad, H. R. Madaah Hosseini, H. Asghari Shivaee, S. Roostaie. Structural and magnetic study of active screen plasma nitrided fe 73.5Si13.5B9Nb3Cu1and Fe77Si11B9Nb2.4Cu0.6 ribbons. Sci Iranica, 2010, 17(1 F) 12-22.

51.  H. A. Shivaee, H. R. Madaah Hosseini, Advanced isoconversional kinetics of nanocrystallization in Fe73.5Si13.5B9Nb3Cu 1 alloy. Thermochimica Acta, 2009, 494(1-2) 80-5.

52.  M. Movahedi, A. H. Kokabi, H. R. Madaah Hosseini, An investigation on the soldering of al 3003/Zn sheets. Mater Charact, 2009, 60(5) 441-6.

53.  V. Abbasi Chianeh, H. R. Madaah Hosseini, M. Nofar, Micro structural features and mechanical properties of al-al 3Ti composite fabricated by in-situ powder metallurgy route. J Alloys Compounds, 2009, 473(1-2) 127-32.

54.  M. Nofar, H. R. Madaah Hosseini, N. Kolagar-Daroonkolaie, Fabrication of high wear resistant Al/Al 3Ti metal matrix composite by in situ hot press method. Materials and Design, 2009, 30(2) 280-6.

55.  M. Nofar, H. R. Madaah Hosseini, H. A. Shivaee. The dependency of optical properties on density for hot pressed MgF 2. Infrared Physics and Technology, 2008, 51(6) 546-9.

56.  S. Hosseini Vajargah, H. R. Madaah Hosseini, Z. A. Nemati. Preparation and characterization of nanocrystalline misch-metal-substituted yttrium iron garnet powder by the sol-gel combustion process. International Journal of Applied Ceramic Technology, 2008, 5(5) 464-8.

57.  M. Movahedi, H. R. Madaah Hosseini. A. H. Kokabi, The influence of roll bonding parameters on the bond strength of al-3003/Zn soldering sheets. Materials Science and Engineering A, 2008, 487(1-2) 417-23.

58.  S. Miraghaei, P. Abachi, H. R. Madaah-Hosseini, A. Bahrami, Characterization of mechanically alloyed Fe100-xSix and Fe83.5Si13.5Nb3 nanocrystalline powders. J Mater Process Technol, 2008, 203(1-3) 554-60.

59.  S. R. Hejazi, H. R. Madaah Hosseini, M. S. Ghamsari.The role of reactants and droplet interfaces on nucleation and growth of ZnO nanorods synthesized by vapor-liquid-solid (VLS) mechanism. J Alloys Compounds, 2008, 455(1-2) 353-7.

60.  H. R. Madaah Hosseini, N. Naghibolashraphy, The effects of misch-metal oxide addition on magnetic properties and crystal structure of Sr1-xMMxFe12O19 ferrite. J Alloys Compounds, 2008, 448(1-2) 284-6.

61.  S. R. Hejazi, H. R. Madaah Hosseini, A diffusion-controlled kinetic model for growth of au-catalyzed ZnO nanorods: Theory and experiment. J Cryst Growth, 2007, 309(1) 70-5.

62.  S. Hosseini Vajargah, H. R. Madaah Hosseini, Z. A. Nemati. Preparation and characterization of yttrium iron garnet (YIG) nanocrystalline powders by auto-combustion of nitrate-citrate gel. J Alloys Compounds, 2007, 430(1-2) 339-43.

63.  Hemmati, H. R. Madaah Hosseini, S. Miraghaei. Effect of processing parameters on electrical, mechanical and magnetic properties of iron-resin soft magnetic composite. Powder Metallurgy, 2007, 50(1) 86-90.

64.  S. H. Mousavi Anijdan, H. R. Madaah-Hosseini, A. Bahrami. Flow stress optimization for 304 stainless steel under cold and warm compression by artificial neural network and genetic algorithm. Materials and Design, 2007, 28(2) 609-15.

65.  Hemmati, H. R. Madaah Hosseini, A. Kianvash, The correlations between processing parameters and magnetic properties of an iron-resin soft magnetic composite. J Magn Magn Mater, 2006, 305(1) 147-51.

66.  H. R. Madaah Hosseini, A. Dadoo, A. Dolati, A. Kianvash, A study on the corrosion behavior of the (Nd, MM)2(Fe, Co,Ni)14B-type sintered magnets. J Alloys Compounds, 2006, 419(1-2) 337-41.

67.  S. Hosseini Vajargah, H. R. Madaah Hosseini, Z. A. Nemati, Synthesis of nanocrystalline yttrium iron garnets by sol-gel combustion process: The influence of pH of precursor solution. Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 2006, 129(1-3) 211-5.

68.  A. Bahrami, H. R. Madaah Hosseini, P. Abachi, S. Miraghaei, Structural and soft magnetic properties of nanocrystalline fe 85Si10Ni5 powders prepared by mechanical alloying. Mater Lett, 2006, 60(8) 1068-70.

69.  H. R. Madaah Hosseini, A. Kianvash, The effects of MM38.2Co46.4Ni15.4 alloy additions on the mechanical properties of a Nd12.8Fe 79.8B7.4-type sintered magnet. Mater Lett, 2006, 60(4) 555-8.

70.  S. H. Mousavi Anijdan, A. Bahrami, H. R. Madaah Hosseini, A. Shafyei, Using genetic algorithm and artificial neural network analyses to design an Al-Si casting alloy of minimum porosity. Materials and Design, 2006, 27(7) 605-9.

71.  A. Bahrami, S. H. Mousavi Anijdan, H. R. Madaah Hosseini, A. Shafyei, R. Narimani, Effective parameters modeling in compression of an austenitic stainless steel using artificial neural network, Computational Materials Science, 2005, 34, 335-341.

72.  H. R. Madaah Hosseini, A. Bahrami. Preparation of nanocrystalline fe-si-ni soft magnetic powders by mechanical alloying. Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 2005, 123(1) 74-9.

73.  H. R. Madaah Hosseini, A. Kianvash. The role of milling atmosphere on microstructure and magnetic properties of a Nd12.8Fe79.8B7.4-type sintered magnet. J Magn Magn Mater, 2004, 281(1) 92-6.

74.  H. R. Madaah Hosseini, A. H. Kokabi. Cold roll bonding of 5754-aluminium strips. Materials Science and Engineering A, 2002, 335(1-2) 186-90.

75.  H. R. Madaah Hosseini, A. Kianvash, H. Yoozbashi-Zadeh, M. Seyyed-Reihani. Correlation between intrinsic coercivity-electrical conductivity-thermal treatment in a Nd11.9MM2.9Fe73.9Co3.3Ni1.1B6.9-type magnet. J Alloys Compounds, 2001, 314(1-2)251-6.

76.  H. R. Madaah Hosseini, A. Kianvash, M. Seyyed Reihani, H. Yoozbashi Zadeh. Production of (Nd,MM)2(Fe,Co,Ni)14B-type sintered magnets using a binary powder blending technique. J Alloys Compounds, 2000, 298(1-2) 319-23.

 

Ø  Conference Proceedings (English):

1.      M. Mojaddami, M. R. Mohammadi, H. R. Madaah Hosseini, A Facile Route to Dye-Sensitized Solar Cells with a Single Layer Deposition of Skein-like TiO2 Nanotubes, 29th European Photovoltaic Solar Energy Conference and Exhibition, 22-26 September 2014, Amsterdam, the Netherlands.

2.      A. Masoudi, H. R. Madaah Hosseini, S. M. Seyed Reyhani, M. A. Shokrgozar, Long-term cytotoxicity assessment of PEG-coated superparamagnetic iron oxide nanoparticles, 5th International Conference on Nanostructures (ICNS5), 6-9 March 2014, Kish Island, Iran.

3.      T. Gheiratmand, H. R. Madaah Hosseini, P. Davami, F. Ostad Hossein, M. Song, M. Gjoka, M. Mansouri, Effect of quenching wheel speed on the structure and Curie temperature of Fe73.5Si13.5B9Nb3Cu1 ribbons, 4 th International Conference on Ultrafine Grained and Nanostructure Matherials, 5-6 November 2013, Tehran, Iran.

4.      T. Gheiratmand, S. Mohammadi Siyani, H. R. Madaah Hosseini, P. Davami, Investigation the structural and magnetic properties of FINEMET type alloy produced by mechanical alloying, 1st International Conference on the Science & Engineering of Materials, 13-14 November 2013, Kuala Lumpur, Malaysia.

5.      A. R. Etemadi, A. H. Kokabi, P. Behjati, H. R. Madaah Hosseini, Effect of joint clearance and post-braze heat treatment on the microstructure of joints with BNi-4 filler metal and 4130 steel, 22-25 April 2012, Las Vegas, Nevada, USA.

6.      B. Nikfar, H. Ghiabakloo, H. R. Madaah Hosseini, A. V. Mohammadi, Al-Al3Ti nanocomposite produced in situ by two-step hot-press sintering, International Conference on Structural Nano Composites (NANOSTRUC 2012), UK.

7.      H. Delavari H., H. R. Madaah Hossein, Self-controlling Hyperthermia Treatment of Prostate and Glioma Cancers via Nickel Alloy Nanoparticles: A Theroritical Study, 4th International Conference on Nanostructures (ICNS4), 12-14 March 2012, Kish Island, I.R. Iran.

8.      S. Naghibi, H. R. Madaah Hosseini, M. A. Faghihi Sani, Synthesis of TiO2-PEG-Folic Acid Nanocomposites for Drug Delivery and Cancer Therapy, 4th International Conference on Nanostructures (ICNS4), 12-14 March 2012, Kish Island, I.R. Iran.

9.      H. A. Shivaee, F. Celegato, P. Tiberto, A. Castellero, H. R. Madaah Hosseini, M. Baricco, Effect of Thickness on Magnetic Properties of FeCuNbSiB Amorphous Thin Films, 4th International Conference on Nanostructures (ICNS4), 12-14 March 2012, Kish Island, I.R. Iran.

10.  A. Vahid Mohammadi, H. R. Madaah Hosseini, Fabrication Of Al-[Al-Al3Ti] Nanocomposite By Mechanical Alloying And Two-Step Hot Pressing, 6th International Powder Metallurgy Conference and Exhibition, 05-08 October2011, Turkey.

11.  S. Moeinifar.A. H. Kokabi, H. R. Madaah Hosseini, C. Shang, G. Hui, L. Zhen, Influence Of Four Wires Tandem Submerged Arc Welding Process On Heat Affected Zone Properties In High Strength Pipeline Steel, 2010 IACSIT SANYA CONFERENCES, Jan 22 - 24, 2010, Sanya, China.

12.  H. Delavar, R. Shidpour, H. R. Madaah Hosseini, A. Simchi, The influence of edge and corner of nanoparticles on Curie temperature, 3rd Conference on Nanostructures (NS2010), March 10-12 2010, Kish Island, Iran.

13.  E. Memarzadeh Lotfabad, H. R. Madaah Hosseini, H. A. Shivaee, New Heat Treatment Method for Improving the Surface of Nanocrystalline alloys, 3Th Conference on Nanostructures (NS 2010), March 10-12 2010, Kish Island, Iran.

14.  S. Moeinifar.A. H. Kokabi, H. R. Madaah Hosseini, IIW International Congress on Welding & Joining, November 30- December 1 2009, Tehran, Iran.

15.  E. Memarzadeh Lotfabad, H. R. Madaah Hosseini, The Effect of Active Screen Plasma Nitriding treatment on structural, Mechanical and Magnetic Properties of Nanocrystalline Finmet-Type Alloy, 2nd International Conference on Ultrafine Grained and Nanostructured Materials (UFGNSM09), November 14-15, 2009, University of Tehran, Iran.

16.  R. Ahmadi, H. R. Madaah Hosseini, A. Sohrabi, Characterization of Magnetite Nanoparticles Coating Density, The China-Germany Bilateral Symposium on Bioelectronics and Biomaterials (CGBSBB 2009).

17.  R. Ahmadi, H. R. Madaah Hosseini, Investigation of Avrami behavior of magnetite nanoparticles formation in co-precipitation process, The China-Germany Bilateral Symposium on Bioelectronics and Biomaterials (CGBSBB 2009).

18.  M. Hajfathalian, Z. R. Nemat, H. R. Madaah Hosseini, Evaluvation of nanocrystalline BA(ZRXTI1-X)O3 produced by mechanical alloying, 2nd International Conference on Ultrafine Grained and Nanostructured Materials (UFGNSM09), November 14-15, 2009, University of Tehran, Iran.

19.  E. Memarzadeh Lotfabad, H. R. Madaah Hosseini, H. A. Shivaee, S. Roostaie, Plasma Nitriding Treatment of Nanocrystalline FINEMET Alloy, 2ed Iran-India Joint Conference on Nanotechnology (IIJCN-2009), 5-7 May 2009, University of Isfahan, Iran.

20.  M. M. Atabaki, H. R. Madaah Hosseini, A. H. Kokabi, Influence of the furnace brazing process parameters on the chemical heterogeneity, mechanical and physical properties of copper- beryllium alloy joints, 4Th International Brazing and Soldering Conference (IBSC), April 26-29, 2009, Orlando, Florida.

21.  T. Gheiratmand, H. R. Madaah Hosseini, Preparation of Nanocrystalline Fe-Ni-Co-Ti Powders by Mechanical Alloying, 2nd International Congress on Nanoscience and Nanotechnology - ICNN 2008, University of Tabriz, October 2008, Tabriz, Iran.

22.  M. Haj-Fathalian, H. R. Madaah Hosseini, Z. R. Nemat, Ba(Ti1-xZrx)O3 Composites from Mechanically Alloyed Nanopowders, 2nd International Congress on Nanoscience and Nanotechnology - ICNN 2008, University of Tabriz, October 2008, Tabriz, Iran.

23.  A. Zareh, H. R. Madaah Hosseini, Z. R. Nemat, Synthesis of Nanocrystalline Yttrium Aluminum Garnets by Sol-Gel Combustion Process: The Influence of pH of Precursor Solution, 2nd International Congress on Nanoscience and Nanotechnology - ICNN 2008, University of Tabriz, October 2008, Tabriz, Iran.

24.  S. Amin-Yavari, A. A. Ziaei-Moayed, H. R. Madaah-Hoseini, Influence of Shot Peening Treatment on the Fatigue Life of Ti6Al4V ELI Biomedical Alloy, 10Th international conference of shot peening (ICSP-10), September 15-18, 2008, Tokyo, Japan.

25.  H.A. Shivaee, H.R. Madaah Hosseini, A. Irajizad, Thermal and Crystallization Behavior of Finmet Amorphous Melt-Spun Ribbons, Proceedings of the 2nd Conference on Nanostructhres (NS2008), March 2008, Kish University, Iran, Pages 200-201.

26.  S.R. Hejazi, H.R. Madaah Hosseini, M. Sasani Ghamsari, M. Shirvani,, Effects of Annealing on Growth and Morphological Aspects of Nanometric Au Islands Sputtered on SiO2 Substrate, First International Congress on Nanoscience and Nanotechnology, December 2006, University of Tehran, Iran.

27.  S. Miraghaei, P. Abachi, H.R. Madaah-Hosseini, Effects of Milling Time, Si Content and Heat Treatment on Microstructure and Magnetic Properties of Mechanically Alloyed Fe-Si Powders, COM 2006- including the 36th Annual Hydrometallurgy Meeting and ICSOBA 2006, October 1-4, 2006, Montreal, Quebec, Canada, Pages 187-202.

28.  M. Nofar, H.R. Madaah Hosseini, H.A. Shivaee, The Effect of Hot Pressing Parameters on the Microstructure and Infrared Transparency of MgF2 Ceramics, Tehran International Congress on Manufacturing Engineering (TICME2005), Tehran, Iran, December 2005.

29.  I. Hemmati, H.R. Madaah Hosseini, M. Nasserian, F. Irani, Production of Soft Magnetic Iron-Resin Composites and Their Applications in Automotive Industry, Proc. 4th Int. Conference on PM for Automotive Parts, ed. A. Arvand and H. Danninger, Isfahan, Iran, April 2005, Pages 276-286.

30.  H. R. Madaah Hosseini, A. Kianvash, The effects of oxygen content on sintering behavior and magnetic properties of a Nd12.8Fe79.8B7.4-type sintered magnet, Proc. Euro PM 2003, Spain, Volume 2, Oct. 2003, 233-238.

31.  H. R. Madaah Hosseini, A. Kianvash, Microstructural and Mechanical Effects of a MM38.2Co46.4Ni15.4 Alloy Additions to a Nd-Fe-B Sintered Magnet, Proc. Euro PM 2003, Spain, Volume 2, Oct. 2003, 229-232.

32.  H. R. Madaah Hosseini, Application of P/M Permanent Magnets in Automotive Industry, Proc. 3 rd Int. Conference on PM for Automotive Parts, ed. A. Arvand and H. Danninger, Isfahan, Iran, April 2002 Paper No. 24.

33.  H. R. Madaah-Hosseini, A. Kianvash, H. Yoozbashi-Zadeh, M. Seyyed-Reihani, Binary Powder Blending Technique (BPBT): An Effective Method in Production of (Nd,MM)2(Fe,Co,Ni)14B-Type Corrosion Resistant Magnets, Proc. 16th Int. Workshop on RE Mag. and their Applications, Japan, Volume 1, Sept.2000, 229-235.

34.  H. R. Madaah Hosseini, M. Seyyed Reihani, H. Yoozbashi Zadeh, A. Kianvash, The influence of heat treatment on the magnetic properties of Nd11.9MM2.8Fe73.9Co3.3Ni1.1B6.9 sintered magnets, Proc. First Regional Conference on Magnetic and Superconducting Materials (MSM-99), ed. M.Akhavan, J. Jensen and K. Kitazawa, World Scientific Pub., Iran, , Volume B, Sep. 1999, 1007-1014.

35.  H. R. Madaah-Hosseini, M. Seyyed-Reihani, H. Yoozbashi-Zadeh, "The Microstructure-Properties Relationships of (Nd,MM)2(Fe,Co,Ni)14B Sintered Magnets", Proc. first Int. Conference on PM for Automotive Parts, ed. A. Arvand and H. Danninger, Isfahan, Iran, April 1999, paper No. 22.

 

Books (Persian):

 

1. Brazing and Soldering, Jahan Jam-E- Jam Pub., 2004, Tehran, Iran.

 

2. Fundamentals of Nanotechnology, Kavosh Ghalam Pub., 2008, Tehran Iran.