HOME  RESUME  

 

Resume:

 


1. Name: Siamak Kazemzadeh Hannani

2. Birth Date & Place: April 21, 1958, Tehran, Iran.

3. Contacts

Address: School of Mechanical Engineering

Sharif University of Technology

P.O. Box: 11365-9567, Tehran, Iran

Tel. Office: (98/21) 66165508

Fax: (98/21) 66000021

Email: hannani@sharif.edu

 

 4. Educational Record

Tabriz University, Tabriz, 1977-1983, B. Sc., Mechanical Engineering

Advisor and B. S. thesis supervisor:  Professor Piroozpanah

Sharif University, Tehran, 1984-1987, M. Sc., Mechanical Engineering

M.S. thesis supervisor: Professor Sadeghipour

Lille University, Lille, 1991-1996, Doctorate in Mechanical Engineering

Doctoral thesis supervisor: Professor Stanislas

 

 

5. Teaching Experience

Lecturer,  1987-1991, Sharif University of Technology

Lab Instructor,  1993-1996, Lille University

Assistant Professor,1996-2004, Sharif University of Technology

Associate Professor, 2004-2008, Sharif University of Technology

Professor, 2008-Present, Sharif University of Technology

 

 

Instructed Graduated Courses:

 

Finite Element Method

Conduction Heat Transfer

Advanced Numerical Methods

Turbulence

Boundary Layer Theory

Exergy Analysis

Process Integration

Turbulence Modeling

Thermo-Fluid Systems in I. C. Engines

 

 

Instructed Under-Graduated Courses:

 

Thermodynamics I

Thermodynamics II

Design of Heat Exchangers

Thermodynamics & Heat Transfer Laboratory

General Heat Transfer

Heat Transfer I

General Thermodynamics

HVAC (Instructed at Carleton University, Ottawa, Canada)

 

 

Supervised and co-supervised Ph.D. Thesis

- Computational Aero-Acoustic Analysis and its Application to Cabin Noise Prediction, March-2004 (M. Ebrahimi)

- Large eddy simulation of heavy particle laden turbulent channel flow, September-2006 (A. Elhami)

- Inverse Heat Transfer analysis of Thermo-Hydraulic Heating Systems, April- 2007 (A. Azimi)

- Turbulent flow modeling of porous media, 2008 ( R. Bahoosh)

- Experimental and numerical study of Direct Injection Spark Ignition Engine, July 2012 (O. Askari)

- Experimental & Numerical investigation about the effect of intake port design on cylinder flow in engine, January 2014 (A. Mohammmad Ebrahim)

 

Supervised M. Sc. Thesis (partial list)

  1. Wind farm layout optimization (2014)- K. Kiamehr

  2. Optimization of PV-wind-diesel system (2014)- M.Sedghi Dehnavi

  3. Evaluation of RANS Models in Simulating Incompressible Laminar and Turbulent Flow through Porous Media (2011)- B. Maha

  4. Simulation of Stratified Combustion Engines (2011)-S. Naseri Oskouei

  5. One Dimensional Numerical Simulation of Pulsating Flow in a Pulse Tube Cycle considering Real Gas Behavior (2010)-F. Roshanghalb

  6. Simulation pf Gravity Drainage in Oil Reservoirs using Black Oil Method (2010)- M. Moshiri

  7. Mathematical Simulation of wax deposition in flow lines using SPH (2009)-M. Haddad

  8. Three dimensional Reservoir Simulation using Black Oil Method (2008)-R. Ganjdanesh

  9. Simulation of Multi-phase Flow in Non-Circular Capillaries using SPH, (2008)-M. A. Fayazbakhsh

  10. Energy Consumption Optimization in Cooling Thermal Storage Systems (2007)-M.R. Zomorodi

  11. Experimental Investigation of Drag Reduction Due to Freezing of Solid Boundary (2007)-T. Adibi

  12. Simulation of Multi-Phase Flows Employing Lattice Boltzmann and Level set Methods (2007)-M. Mehravaran

  13. Simulation of 2-D flow in reservoirs using black-oil model and control volume function approximation (2007)-F. Alimohannadi

  14. Analytical and experimental modeling of multi bypass pulse tube refrigerator (2007)-S.D. Kenarsari

  15. Comparison of energy consumption of various heating systems for optimizing design of residential energy consumption (2007)-S. Nikoofard

  16. Simulation of flow in 2-D fractured oil reservoirs using Black oil model and mixed Finite Element-Finite Volume Methods (2007)-H. Hajibeigi

  17. 2-D parallel simulation of two-phase flow through porous media using Discontinuous Galerkin Finite Element Method (2007)-S. Ehsan Hosseini

  18. Simulation of a 2-D oil reservoir flow using Black Oil model and Mixed Finite Element-Finite Volume Methods (2007)-A. Karimi

  19. Three Dimensional Simulation of Oil Reservoir Using Black-Oil Model (2006)-R. Khorasani

  20. An unstructured Multi Grid Approach for Numerical Simulation of Two-phase Flow in a Two Dimensional Porous Media (2006)-Kalantarian and Jamshidi

  21. Simulation of Combustion and Pollutant Formation in a Furnace along with Experimental Measurements (2005)-B. Lotfifar

  22. Developing of a model heat transfer in a palletizing furnace (2005)-S. Arian

  23. Numerical Simulation of Internal Combustion Engine Silencers (2005)- M.K. Dezfouli

  24. Vortex-Induced Vibration in Risers (2005)-H. Salmasi

  25. Parallel Simulation of Heat Conduction with Phase Change Using Finite Element Method (2005)-S. Hendabadi

  26. Numerical Simulation of Two-phase flow in Homogeneous and Heterogeneous Porous Media by an Eulerian-Lagrangian Method (2005)-R. Fatehi

  27. Numerical Analysis of Fluid and Transport in Porous Media Using Discontinuous Galerkin Finite Element Method (2005)-A. Qazi Zade

  28. Numerical Study of Air-side Heat Transfer and Pressure  Drop in a Compact Heat Exchanger with Corrugated Triangular Louvered Fins (2005)-E. Samadiani

  29. Exergy Analysis in a Cement Factory (2005)-G. Arab

  30. Simulation and Energy Management of a Residential Building Using Neural Network (2005)-M. Fardadi

  31. Simulation of Heating Energy Consumption for Residential Building in Different Climates (2005)-M. Shahmodamadi

  32. A Study on Large Structure of Buoyant Plume Using LES (2005)-M. Sani

  33. Simulation of Industrial Flows with Free Surface Using SPH-Methods (2005)-Hosseini

  34. Engineering Design and Analysis of Desiccant Cooling System (2005)-Fatehi Boroujeni

  35. An Edge-Based Finite Element Formulation for Solving Two-Phase Flow in Porous Media (2004)-E. Fathollahi

  36. An explicit finite element algorithm for convection heat transfer problems (2004)-H. Pourfarzaneh

  37. Study and optimization of heat transfer from an impinging jet to an isothermal wall (2004)-M. Karzar Jeddi

  38. Non-Fourier heat Conduction  using adaptive mesh generation (2004)-M. Saninejad

  39. A Study of Surge phenomenon in Gas turbine Plants (2004)-H. Zandavi

  40. An exergy economic study of flow of energy in residential Buildings (2003)-F. Foroozandeh

  41. Implementation of v2f Turbulence Model for Investigation of Turbulence Characteristics (2003)-H. Montazeri

  42. Calculations of Navier-Stokes Equations using Finite Point Method (2002)-M. Sadeghi

  43. Optimization of Mesh Smoothing Function Using Artificial Intelligence Methods (2002)-A. Kia

  44. Sectoral Energy and Exergy Modeling of Iran (2002)-A. Jafarian-Dehkordi

  45. Near Wall Second-Moment-Closure Turbulent Flow Modeling with the aid of DNS (2002)-A. Raeisi

  46. A New Low Reynolds Number k-e Models Based on DNS (2001)-H. Pourtaba

  47. Turbulent Heat Transfer over Cylinders during Solidification (2001)-A. Kermanshahi

  48. On modeling of Micro-channel Flows (2001)-A. Ghods

  49. Cycle Simulation of C.I. Engines (2001)-A. Roshanmilani

  50. Turbulent Natural Convection in an Enclosed Air Filled Square Cavity (2001)-S. Asgari Motlagh

  51. Heat Transfer Analysis of Internal Combustion Engines  (2000)-A. Jafari

  52. Natural Convection Heat Transfer form a heated horizontal cylinder-A Finite Element Solution (2000)-R. Bahoosh

  53. Effects of Confining Wall on the Performance of Condensers of Household Refrigerators  (2000)- M. Nazoktabar

  54. Effect of Pulsation Inlet on Convection Heat Transfer (1999)-S. Shojaeizadeh

  55. Low Reynolds Number Treatment of Wall Regions Using k-e Models (1999)-A. Afshari

  56. Mesh-less Methods and their Application on Solving Fluid Mechanics Problems (1999)-F. Parsinejad

  57. Numerical Study of Flow around a Propeller for Dynamic Analysis of Propulsion System (1999)-S. M. Mirtalaei

  58. On the Boundedness and Application of Second Order Methods for Solving laminar and Turbulent Flow Equations (1998)-M. Mirzaei

  59. Application of Multi-Grid Method for Solving Turbulent Flow Equations (1998)-M. Soltani

  60. Modeling of Heat Transfer in Biological Tissues in Cryosurgery (1998)-V. Dehlaghi

 

 

 

Publications

 

 Journal Papers (partial list)

 

  1. M. Aboutalebi, O Adibi, M. A. Bijarchi, M. B. Shafii and S. K. Hannani,The variations of breakup and non-breakup regions for ferrofluid microdroplets in T-junctions with a proposed correlation, Scientia Iranica,https://doi.org/10.24200/sci.2024.57207.5113, April 2024

  2. Mohsen Besanjideh, Masoud Rezaeian, Amir Shamloo, Siamak Kazemzadeh Hannani,Simple Method for On-Demand Droplet Trapping in a Microfluidic Device Based on the Concept of Hydrodynamic Resistance, Langmuir, Vol 40, Issue 18, April 2024

  3. Behrad Asgari, A. Hakkakifard, Siamak Kazemzadeh Hannani Effect of baffle turbulators on the horizontal solar film evaporator of the humidification-dehumidification desalination Thermal Science and Engineering Progress, 42, 101888, 2023

  4. R Moghanni, A Hakkaki-Fard, SK Hannani A comprehensive study on the performance of vertical ground-coupled heat pumps Geothermics 110, 102674, 2023

  5. M Aboutalebi, MB Shafii, S Kazemzadeh Hannani Numerical Study on the Ferrofluid Droplet Splitting in a T-junction‎ with Branches of Unequal Widths using Asymmetric Magnetic Field‎ Journal of Applied and Computational Mechanics 9 (2), 357-370, 2023

  6. M Jamshidian, K Mohammadi, A Moosavi, S Kazemzadeh Hannani Pulsed coaxial drop-on-demand electrohydrodynamic printing Physics of Fluids 35 (3),2023

  7. M Besanjideh, A Shamloo, SK Hannani Evaluating the reliability of tumour spheroid-on-chip models for replicating intratumoural drug delivery: considering the role of microfluidic parameters Journal of Drug Targeting 31 (2), 179-193,2023

  8. B Asgari, A Hakkaki-Fard, SK Hannani On the performance of solar humidification-dehumidification desalination system with subsurface condenser Applied Thermal Engineering 220, 119721,2023

  9. AA Ashnani, A Azadi, B Firoozabadi, SK Hannani Numerical Investigation of Inclined Dense Jet Behavior in Shallow Waters: Effect of Depth Variation and Free Surface Displacement Journal of Hydraulic Engineering 148 (12), 04022025,2022

  10. Z Fazel, H Sadrhosseini, SK Hannani Heat transfer intensification of turbulent forced convection by inserting discontinuous twisted tapes in a wavy tube; hydrothermal and thermodynamics analysis Chemical Engineering and Processing-Process Intensification 181, 109137

  11. B. Asgari, M. Bizhani, A. Hakkakifard, S.K: Hannani, Performance evaluation of different configurations of solar humidification-dehumidification desalination system with subsurface condenser Energy Conversion and Management 269, 116186, 2022

  12. O. Salehi, A. Moosavi, S.K. Hannani, Friction reduction in grafted carbon nanochannels by applying an electric field Computational Materials Science 213, 111676, 2022

  13. F.Fazel, H. Sadrhosseini, S.K. Hannani, Heat transfer intensification of turbulent forced convection by inserting discontinuous twisted tapes in a wavy tube; Hydrothermal and thermodynamics analysis Chemical Engineering and Processing-Process Intensification, 109137, 2022

  14. M. Besanjideh, A. Shamloo, S.K. Hannani, Evaluating the reliability of tumor spheroid-on-chip models for replicating intratumoral drug delivery: Considering the role of microfluidic parameters Journal of Drug Targeting, 1-22, 2022

  15. E. Asghari, A. Moosavi, S. K. Hannani, Analytical and numerical study on droplet breakup in microfluidic T-junction Chemical Engineering and Processing-Process Intensification 177, 108995, 2022

  16. A. Najmi, M. S. Saidi, S.K. Hannani, Design of the micropump and mass-transfer compartment of a microfluidic system for regular nonenzymatic glucose measurement Biotechnology Reports 34, e00723, 2022

  17. M. Besanjideh, M. Rezaeien, Z. Mahmoudi, A. Shamloo, S. K. Hannani, Investigating the effects of precursor concentration and gelling parameters on droplet-based generation of Ca-Alginate microgels: identifying new stable modes of droplet formation Materials Today Chemistry 24, 100821, 2022

  18. N Amiri, M Honarmand, M Dizani, A Moosavi, S Kazemzadeh Hannani, Shear-thinning droplet formation inside a microfluidic T-junction under an electric field, Acta Mechanica 232 (7), 2535-2554, 2022

  19. A.S. Eghtesad, H. Afshin, S.K. Hannani, Energy, exergy, exergoeconomic, and economic analysis of a novel power generation cycle integrated with seawater desalination system using the cold energy of liquified natural gas, Energy Conversion and Management 243 2021

  20. M. Aboutalebi, M.B. Shafii, S.K. Hannani, Numerical Study on the Ferrofluid Droplet Splitting in a T-junction with Branches of Unequal Widths using Asymmetric Magnetic Field, J. Appl. Comput. Mech., xx(x) 1-14 2021

  21. O. Saleki, A. Mousavi, S.K. Hannani, Friction reduction in a nanochannel with grafted poly(N-isopropylacrylamide) oligomers: A molecular dynamics study, Physics of Fluids 33(5):052004 May 2021

  22. R. Niroomand, M.H. Saidi, S.K. Hannani, A new multiscale modeling framework for investigating thermally-induced flow maldistribution in multi-stream plate-fin heat exchangers, International Journal of Heat and Mass Transfer, Volume 180, December, 121779, 2021

  23. R. Niroomand, M.H. Saidi, S.K. Hannani, A general multi-scale modeling framework for two-phase simulation of multi-stream plate-fin heat exchangers, International Journal of Heat and Mass Transfer 156, 119730 2020

  24. S.S. Salehi, A. Shamloo, S.K. Hannani, Parametric Study of Droplet Formation and Characteristics within Microfluidic Devices-A Case Study,  International Journal of Applied Mechanics 2020

  25. E. Asghari, A. Moosavi, S.K. Hannani, Non-Newtonian droplet-based microfluidics logic gates,  Scientific Reports 10 (1), 1-18 2020

  26. M. Salakhi, H. Afshin, S.K. Hannani, Numerical investigation and optimization of indirect freeze desalination A Eghtesad,  Desalination 481, 114378 1 2020

  27. S.S. Salehi, A. Shamloo, S.K. Hannani, Microfluidic technologies to engineer mesenchymal stem cell aggregates�applications and benefits,  Biophysical Reviews, 1-11 1 2020

  28. A. Moosavi, S.K. Hannani, Non-Newtonian droplet-based microfluidics logic gates A Elmira, Scientific Reports (Nature Publisher Group) 10 (1) 2020

  29. O. Saleki, A. Moosavi, S.K. Hannani, Molecular Dynamics Study of Friction Reduction of Two-Phase Flows on Surfaces Using 3D Hierarchical Nanostructures,  The Journal of Physical Chemistry C 123 (45), 27519-27530 2019

  30. M. Moezzi, S. Kazemzadeh Hannani, B. Farhanieh, The role of surface wettability on the heat transfer in liquid-liquid two-phase flow in a microtube,  Physics of Fluids 31 (8), 082004

  31. M. Moezzi, S. K. Hannani and B. Farhanieh, Hysteretic heat transfer study of liquid-liquid two-phase flow in a T-junction microchannel, International Journal of Heat and Fluid Flow, Volume 77, June 2019, pages 366-376

  32. R. Niroomand, M. H. Saidi and S. K. Hannani, A quasi-three-dimensional thermal model for multi-stream plate fin heat exchangers, Applied Thermal Engineering, Volume 157, 5 July 2019, 113730

  33. M. Aboutalebi, M. A. Bijarchi and M. B. Shafii and S. K. Hannani, Numerical investigation on splitting of ferrofluid microdroplets in T-junctions using an asymmetric magnetic field with proposed correlation, Journal of Magnetism and Magnetic Materials, Volume 447, 1 February 2018, pages 139-149

  34. H. Khakrah, A. Shamloo and S. K. Hannani, Exergy analysis of parabolic trough solar collectors using Al2O3/synthetic oil nanofluid, Solar Energy, Volume 173, October 2018, 1236-1247

  35. E. Asghari, A. Moosavi and S. K. Hannani, Simulation of water purification using magnetically ultra-responsive micro- and nanoscavengers, Journal of Water Process Engineering 24 (2018) 63-73

  36. H. Khakrah, A. Shamloo and S. K. Hannani, Determination of Parabolic Through Solar Collector Efficiency Using Nano-Fluid: A Comprehensive
    Numerical Study, J. Sol. Energy Eng 139(5), 051006 (Jul 27, 2017) (11pages)

  37. M. Sedghi, S. K. Hannani, and M. Boroushaki, Estimation of weibull parameters for wind energy application in Iran�s cities, Wind and Structures, Vol. 21, No. 2, 203-221 (2015)

  38. M. Sedghi, M. Boroushaki, and S. K. Hannani, Modeling changes in wind speed with height in Iran�s cities and its impact on the energy production, JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY 7, 023132 (2015)

  39. A. Bedram, A. Moosavia, and S. K.  Hannani, Analytical relations for long droplet breakup in asymmetric T junctions,  DOI:10.1103/ PhysRevE. 91.053012, PHYSICAL REVIEW E 91, 053012 (2015)

  40. A. Bedram, A. Moosavia, and S. K. Hannani, A novel method for producing unequal sized droplets in micro and nanofluidic channels, DOI 10.1140/epje/i2015-15096-1, Eur. Phys. J. E. 38: 96 (2015)

  41. A. Bedram, A. E. Darabi, A. Moosavi and S. K. Hannani, Numerical Investigation of an Efficient Method (T Junction With Valve) for Producing Unequal-Sized Droplets in Micro- and Nano-Fluidic Systems, J. Fluids Eng. 137 (3), 031202  DOI: 10.1115/1.4028499 (2015)

  42. M. Mohammadi, M. Taslimifar, MH. Saidi, H. Afshin, S. K. Hannani, Ferrofluidic Open Look Pulsating Heat Pipes: Efficient Candidates for Thermal Management of Electronics, Experimental Heat Transfer Vol. 27 No. 3, 296-312 (2014)

  43. A. Mohammad Ebrahim, S. K. Hannani, M.B. Shafii, Investigation into  the effect of intake port geometric parameters and blockage on flow coefficient and in- cylinder flow: Application to engine port design, Scientia Iranica, Vol. 21, No. 2, 436-448 (2014)

  44. M. Mohammadi, M. Taslimifar, S. Haghayegh, S. K. Hannani, M. B. Shafii, Open- Loop Pulsating Heat Pipes Charged With Magnetic Nanofluids: Powerful Candidates for Future Electronic Coolers, Nanoscale and Microscale Thermophysical Engineering, Vol. 18, No. 1, 18-38 (2014)

  45. K. Kiamehr, S. K. Hannani, Wind farm layout optimization using imperialist competitive algorithm, J. Renewable and Sustainable Energy Vol. 6, 043109 (2014)

  46. O. Askari, H. Metghalchi, S. K. Hannani, A. Moghaddas, R.  Ebrahimi, H. Hemmati, Lean Partially Premixed Combustion Investigation of Methane Direct-Injection Under Different Characteristic Parameters, ASME  J. Energy Resources Technology, Vol. 136, No. 2, Feb 20 (2014)

  47. O. Askari, H. Metghalchi, S.  K. Hannani, A. Moghaddas, R.  Ebrahimi, H. Hemmati, Fundamental Study of Spray and Partially Premixed Combustion of Methane/Air Mixture, ASME Journal of Energy Resources Technology, Vol. 135, [DOI: 10.1115/1.4007911], June (2013)

  48. M. Moshiri, M. T. Manzari, S. K. Hannani and H. Rasooli, Simulation of multi-phase flow in porous media with gravitational effects using dominant wave method,  Int. Journal of Numerical Methods for Heat and Fluid Flow , Vol. 23 No. 7, pp. 1204-1224, (2013)

  49. M. Moshiri, M. T. Manzari, S. K. Hannani, Simulation of Gravitational Effects in Oil Reservoirs, M. Moshiri, M. T. Manzari, S. K. Hannani, Accepted for publication in the Sharif Research and Science Journal.

  50. H. Naderan, M. T. Manzari, S. K. Hannani, A numerical comparative study of various flooding techniques in hydrocarbon reservoirs, Journal of Porous media, Vol. 15(2), pp 101-112 (2012)

  51. O. Asgari,  S. K. Hannani, R. Ebrahimi, Improvement and experimental validation of a multi-zone model for combustion and NO emissions in CNG fueled spark ignition engine, Journal of Mechanical Science and Technology, Vol. 26(4), pp 1205-1212, (2012)

  52. M. Mehravaran, S. K. Hannani, Simulation of buoyant flow motion in viscous flows employing lattice Boltzmann and level set methods-Scientia-Iranica 18(2), pp 231-240 (2011)

  53. A. Karimi, H. Naderan, M. T. Manzari, S. K. Hannani, A comparison between high resolution central and Godunov-based schemes for the black oil simulation, International Journal of Numerical Methods for Heat and Fluid Flow 19 (2), pp. 125-145 (2009)

  54. R. Fatehi, M. T. Manzari, S. K. Hannani, A finite volume ELLAM for non linear flux convection-diffusion problems, International Journal of Non-Linear Mechanics 44 (2), pp. 129-136 (2009)

  55. R. Bahoosh Kazerooni and S. K. Hannani, Simulation of turbulent flow through porous media employing a v2f model, Scientia-Iranica 16(2B), pp 159-167 (2009)

  56. A. Jafarian, M. H. Saidi, S. K. Hannani, Second law based modeling to optimum design of high capacity pulse tube refrigerators, International Journal of Refrigeration 32 (1), pp. 58-69 (2009)

  57. M. Mehravaran, S. K. Hannani, Simulation of incompressible two-phase flows with large density differences employing lattice Boltzmann and level set methods, Computer Methods in Applied Mechanics and Engineering 198 (2), pp. 223-233 (2008)

  58. Sarikhani, M. H. Saidi, S. K. Hannani, Numerical simulation of performance optimization of a high capacity pulse tube cryocooler, International Communications in Heat and mass Transfer 35 (9), pp. 1204-1210 (2008)

  59. A. Azimi, S. K. Hannani, B. Farhanieh, Structured multiblock body fitted grids solution of transient inverse heat conduction problems in an arbitrary geometry, Numerical Heat Transfer, Part B: Fundamentals 54 (3), pp. 260-290 (2008)

  60. A. Jafarian, M. H. Saidi, S. K. Hannani, Second law analysis of fluid flow in the regenerator of pulse tube refrigerators, International Journal of Engineering, Transactions A: basics 21 (2), pp. 181-194 (2008)

  61. S. M. Hosseini, M. T. Manzar, S. K. Hannnai, A fully explicit three-step SPH algorithm for simulation of non-newtonian fluid flow, Int. Journal of Numerical Methods in Heat and Fluid Flow, Vol. 17, pp 715-735, 2007

  62. Azad Qazi Zade, Mehrdad T. Manzari , S. K. Hannani, An analytical solution for thermally fully developed combined pressure � electroosmotically driven flow in microchannels, Int. J. Heat Mass Transfer, 50  (2007) pp 1087-1096

  63. A. Elhami Amiri, S. K. Hannani, F. Mashayek, Large Eddy Simulation of a Turbulent Channel Flow- Effect of Explicit Filtering on Convergence Rate and Near Wall Turbulence Structures, Mech. & Aerospace Eng. J. Vol. 2, No. 1, pp 95-109,  September, 2006

  64. A. Azimi, S. K. Hannani, B. Farhanieh "Implementation of Geometrical Domain Decomposition Method for Solution of Axisymmetric Transient Inverse Heat Conduction Problems, Accepted and will appear in Journal of Heat Engineering, 2007

  65. S. K. Hannani, E. Hessari, M. Fardadi, M. Karzar-Jeddi, Mathematical Modeling of Cooking-Pots Thermal Efficiency Using a Combined Experimental and Neural Network Method, Journal of Energy, Vol. 31, pp. 2633-2649 (2006)

  66. H. Naderan, M. T. Manzari, and S. K. Hannani, Application and Performance Comparison of High Resolution Central Schemes for the Black Oil Model,  Int. Journal of Numerical Methods in Heat and Fluid Flow, Vol. 17, pp 736-753, 2007

  67. Azimi, A., Farhanieh, B., and Hannani, S. K., Solution of Axisymmetric Transient Inverse Heat Conduction Problems Using Parameter Estimation and Multi-Block Method, Computational Fluid Dynamics Journal, pp1-8 (2006)

  68. Behzad, M., Salmasi, H., Hannani, S. K., and Seif, M.S., Using Several Structure-Fluid Coupling Models to Investigate on Vibration Characteristics in Locking Area, Journal of Marine Engineering, Vol. 2, No. 1, pp 29-44, 2006 (In Persian)

  69. A. Elhami Amiri, S. K. Hannani, F. Mashayek, Large-Eddy Simulation of Heavy-Particle Transport in Turbulent Flow,  Numerical Heat Transfer, Part B, 50, pp 285-313 (2006)

  70. A. Jafari and S. K. Hannani, Effect of Fuel and Engine Operational Characteristics on the Heat Loss from Combustion Chamber Surfaces of S.I. Engines, Int. Communications in Heat Mass Transfer, Vol. 33, 122-134 (2006)

  71. A. Azimi, S. K. Hannani and B. Farhanieh,  Structured  Multi-Block Grids Solution of Two-Dimensional Transient Inverse Heat Conduction Problems, J. Numerical Heat Transfer, Part B., Vol. 48: 571-590 (2005)

  72. A. Elhami Amiri, S. K. Hannani and F. Mashayek, Evaluation of a Fourth-Order Finite Volume Compact Scheme of LES with Explicit Filtering, J. Num. Heat Transfer, Part B, Vol. 48, No. 2, 147-164, 2005

  73. A. Azimi, S. K. Hannani and B. Farhanieh,  Structured  Multi-Block Grids Solution of Two-Dimensional Transient Inverse Heat Conduction Problems, J. Numerical Heat Transfer, Part B. To appear

  74. M. Karzar-Jeddi, S. K. Hannani, and B. Farhanieh, A study of Mixed Convection Heat Transfer from an Impinging Jet to a Solid Wall Using a Finite Element Method-Application to Cook-top Modeling,  Part B: Fundamentals, Vol. 46, pp. 387-397, 2004

  75. M. Farshchi, S.K. Hannani and M. Ebrahimi, Linearized and non Linear Acoustic/Viscous Splitting Technique for the low-Mach Number Flows, Int. J. Numer. Methods Fluids, Vol. 42, pp 1059-1072 (2003)

  76. S.K. Hannani and M.M. Sadeghi, Navier-Stokes Calculation using a Finite Point Mesh-less Method, to appear in Scientia Iranica., Summer 2005

  77. S. K. Hannani, A.H. Kakaei, M.H. Saeidi and S. Valipour, A Thermodynamic Model to Study the Energy Consumption of Gas Cooking Ovens, Journal of Sharif University, to appear in persian

  78. S. K. Hannani and F. Parsinejhad, Incompressible Stokes Flow Calculations Using a Finite Point Method, Scientia Iranica, Vol 10. No.1 pp 1-13 (2003)

  79. S. Rafee, T. Tavakoli and S. K. Hannani, Simulating Binam Rice Temperature through Drying Process using Finite Element Method, J. Agricultural Engineering Research, in Persian, Vol. 3, No.10, pp 1-18, (2002)

  80. S. K. Hannani, M.S. Sadeghipour and M. Nazaktabar, Natural Convection Heat Transfer from Horizontal Cylinders in a Vertical array Confined Between Parallel walls, International Journal of Engineering, Vol 15. No. 3 pp 293-302 (2002)

  81. S. K. Hannani and M. Stanislas, Incompressible turbulent flow simulation using a Galerkin/Least-Squares formulation and a low Reynolds number k-e model, Comput. Methods Appl. Mech. Engrgr.  Vol 181, pp 107-116 (2000)

  82. S. K. Hannani and M. Stanislas, Finite element simulation of turbulent Couette-Poiseuille flows using a low Reynolds k-e model, Int. J. Num. Methods in Fluids, Vol. 30, pp 83-103 (1999)

  83. V. Dehlaghi, B. Farhanieh and S. K. Hannani, Modeling of Heat Transfer in Biological Tissues in Cryosurgery, Journal of Medical Science of Ghazvin Univeristy, in persian,  Vol. 9, pp 47-53 (1999)

  84. S. K. Hannani and M. Stanislas and P. Dupont, Incompressible Navier-Stokes computations with SUPG and GLS formulations- A comparison study, Comput. Methods Appl. Mech. Engrgr. Vol 122, pp 153-170  (1995)

  85. M. S. Sadeghipour and S. K. Hannani, Transient natural convection from a horizontal cylinder confined between vertical walls-A finite element solution, Int. J. Num. Methods in Engrgr., Vol 133, pp 1-14  (1992)

 

 

 

Conference Papers (partial list)

  1. O. Asgari, S. K. Hannani and R. Ebrahimi, Spray Characteristics and Control of Fuel Injection of Methane using the Optical and Polynomial Curve Fitting Methods, Proceedings of the International Conference on Mechanical Engineering and Mechatronics, Ottawa, Ontario, Canada, 16-18 August 2012, Paper No. 179

  2. O. Asgari, S. K. Hannani and R. Ebrahimi, The effect of division of the burned gas region for realistic in-cylinder No predictions-An experimental and thermodynamics study, Proceedings of the 23rd CANCAM , 5-9 June 2011

  3. A. Jafarian, N. Sharikhani, M. H. Saidi, S. K. Hannani, Effect of pressure wave generator characteristics on pulse tube cryocooler performance, ASME International Mechanical Engineering Congress and Exposition, Proceedings 10 (part C), pp. 1649-1654 (2009)

  4. S. K. Hannani, A. Azimi, S. Nikoofard, Energy Consumption of different Building Energy Systems -A Comparison Study, Proceedings of World Academy of Science, Engineering and Technology 2008, ISSN 2070-3740   

  5. M. H. Saidi, M. Taheri, R. Jahanbakhsh, A. Jafarian, S. K. Hannani, Two dimensional oscillatory flow analysis in the pulse tubes, ASME International Mechanical Engineering Congress and Exposition, Proceedings 10 (part A), pp. 685-690 (2009)

  6. A. Jafarian, M. H. Saidi, S. K. Hannani, S.D. Kenarsari, A one dimensional model for compressible oscillatory flow in the regenerator of pulse tube refrigerator, Proceedings of 22nd International Congress of Refrigeration, August 21-26, 2007, Beijing, China

  7. A. Azimi, S. K. Hannani, and B. Farhanieh, Simultaneous Estimation of Heat Source and Boundary Condition, Int. Conf. Comput. Meths. in Science and Energy, Lecture Series on Computer, Vol. 1, 2004, pp 49-52

  8. H. Montazeri, S. K. Hannani, and B. Farhanieh, Turbulent Flow Using a Modified V2F Turbulence Model, IMEC2004, ASME Int. Mech. Engrg. Congress, 2004

  9. M. Karzar-Jeddi, S. K. Hannani, B. Farhanieh, A study of the effect of geometrical parameters on heat transfer from an impinging jet, ISME2004, Tehran

  10. M. Fardadi, A. S. Ghafari, and S. K. Hannani, IMC based, Robust PID Controller Tuning for SUT BEMS, 24th IASTED Int. Conf., Paper No., 457-134, 2005

  11. A. Azimi, S. K. Hannani, and B. Farhanieh, Application of multi block method for solution of two-dimensional transient inverse heat conduction problems, 5th International Conference on Inverse Problems in Engineering, Cambridge, UK, 11-15th July 2005.

  12. M. Fardadi, A. S. Ghafari, and S. K. Hannani, PID Neural Network Control of SUT BEMS, 2005 IEEE/ASME Int. Conference on Advanced Mechatronics, July 2005

  13. Azimi, S. K. Hannani, and B. Farhanieh, Solution of Axisymmetric Transient Inverse Heat Conduction Problem Using Parameter Estimation and Multi-Block Methods, CFD2005, Canada, 2005

  14. S. M. Bostandoost, M. T. Manzari, and S. K. Hannani, Parallel  Incompressible N-S Computation using SUPG and GLS Formulation, 2nd BSME_ASME International Conference on Thermal Engineering, 2-4 January, Dhaka, Bangladesh (2004)

  15. M. Fardadi, S. K. Hannani, and R. Bahoosh, Simulation of Electronic Cooling Using Artificial Neural Network Method, 8th Fluid Dynamics conference, Tabriz, in Persian, (2003)

  16. M. M. Sadeghi, amd S. K. Hannani, On the solution  of  Navier-Stokes Equation using  Mesh-less Methods, 8th Fluid Dynamics conference, Tabriz, in Persian, (2003)

  17. H. Raeisi, S. K. Hannani, and M. T. Manzari, A DNS based Low Reynolds Number Second Moment Closure Turbulence Model, ISME2003, pp 223-228, (2003)

  18. M. Karzar-Jeddi, B. Beheshti, B.  Farhanieh, and S. K. Hannani, Vortex Shedding and Heat Transfer over Complex Geometries using Collocated Grid, ISME2003, pp 38-44, (2003)

  19. A. Azimi, V. Esfahanian, and S. K. Hannani, Simultaneous Computation of Internal-External Axisymmetric Laminar Compressible Flow using Multi-block Method, 11th CFD Canada Conference, pp 437- 444, (2003)

  20. V. Esfahanian, S. K. Hannani and A Azimi, Simulation of two-dimensional axisymmetric flow�, ISME2003, Mashhad, in Persian, (2003)

  21. M. Farshchi, S. K. Hannani and M. Ebrahimi, Sound generation by low mach number air flow over a two dimensional open cavity, 4th conference of Iranian Aerospace Society, pp 112-121, Tehran, Iran (2003)

  22. S. K. Hannani, A. Behdashti, A. R. Elhami and H. Ebrahimpour, Optimization of nozzle arrangement at inlet air fogging system using CFD method, 4th conference of Iranian Aerospace Society, pp 169-179, Tehran, Iran (2003)

  23. A.  Jafari  and S. K. Hannani, The influence of compression ratio on engine performance, Second International Conference on Internal Combustion Engines, pp- 275-283, in Persian, Tehran, Iran (2002)

  24. M.H. Saidi, S. K. Hannani and A. Mansoori, Experimental and Numerical Investigation of Gas Burners, ISME2002, pp 1462-1469, in Persian, Tehran, Iran (2002)

  25. S. K. Hannnai and A. Kermanshahi, Turbulent Heat Transfer over Cylinders during Solidification, ISME2002, pp 1585-1592, in Persian, Tehran. Iran (2002)

  26. S. K. Hannnai and A. Ghods, On modeling of Micro-channel Flow, ISME2002, pp. 1833-1839, in Persian, Tehran. Iran (2002)

  27. M. Behzad, S.k. Hannnai and S.M. Mirtalaei, Numerical Study of Flow around a Propeller for Dynamic Analysis of Propulsion System, ISME2002, pp 1947-1956, in Persian, Tehran. Iran (2002)

  28. A. Behdashti, S. K. Hannani, M.H. Saeedi and A.R. Elhami, Gas turbine power augmentation in hot season by inlet air cooling, 17th International Power System Conference, pp 39-45, Tehran, Iran (2002)

  29. A.  Jafari  and S. K. Hannani, An investigation of effects of changing fuel and other operational characteristics on heat loss from combustion chamber surfaces of SI engines, FISITA 2002 World Automotive Congress, Paper code: F02V028, Helsinki, Finland (2002)

  30. S. K. Hannani, R. Bahoosh and M. Nazaktabar, Natural convection heat transfer characteristics of a horizontal heated cylinder confined between walls- A Finite Element Solution, ESDA 2002, Paper No: ATF-008, Istanbul, Turkey (2002)

  31. S. K.  Hannani and A. Jafari,  On heat Transfer in combustion Chamber of Internal Combustion Engines, ISME 2001, pp 59-65, in Persian, Guilan, Iran (2001)

  32. M. Soltani and S. K.  Hannani, Convergence enhancemenet of iterative schemes using multi-grid method-Incompressible flow application, ISME2001, pp 109-115, in Persian, Guilan, Iran (2001)

  33. S. K. Hannani and R. Bahoosh, On the stability of natural convection from a heated horizontal cylinder � A finite element solution, First International and 3rd National Iranian Aerospace Conference, pp 331-339, in Persian, Tehran, January (2001)

  34. S. K.  Hannani and A. Jafari, Turbulent flow calculations using a k-e-v2 near wall model, 5th Biennial Conference on Engineering Systems Design and Analysis, ASME 2000, pp- 483-488, Montreux, July (2000)

  35. S. K. Hannani and A. Afshari, A wall distance free low Reynolds number model based on Direct Numerical Simulation, Proceedings of ISME2000 conference, pp- 565-571, Tehran, April (2000)

  36. M. Farshchi, S.K. Hannani and M. Ebrahimi, A comparative study of optimized schemes for computational aero-acoustics, Proceedings of ISME2000 conference, pp-513-521,Tehran, April (2000)

  37. S. K. Hannani, A relationship between the boundary-integral modification of GLS formulation for stokes flow and the bubble functions, Proceedings of ISME2000 conference, pp 573-577, Tehran,  April (2000)

  38. S .K. Hannani and F. Parsinejad, On the accuracy of finite point method on solving fluid Mechanics problems, Proceeding of Sixth Fluid Dynamics Conference, in Persian, pp- 112-123, Tehran, March (2000)

  39. S. K. Hannani and A. Afshari, Turbulent flow calculations using a DNS based k-e model,  Proceedings  of   Seventh Annual Conference of the CFD Society of Canada, pp. 8.15-8.20, May  (1999)

  40. S. K. Hannani and M. Mirzaei, On the Boundedness and Application of Second Order Methods for Solving laminar and Turbulent Flow Equations, Proceedings of Seventh Annual ISME conference, in persian, pp 761, Zahedan,  (1999)

  41. S. K. Hannani and M. Mirzaei, Incompressible laminar and turbulent flow calculations using first order Upwind and SMART scheme- A comparison study, Proceedings of the 3rd  ASME/JSME  Fluid Engineering Conference, pp. 1-9,  July (1999)

  42. S. K. Hannani, On the accuracy of pressure solution of Galerkin/Least-Square formulations, proceedings of Sixth Annual Mechanical Engineering Conference, in persian, pp 187-163, (1998)

  43. M. Stanislas, S. K. Hannani and A. Deldicque, Description of numerical methodology  for test case 1a, ERCOFTAC Workshop on databases and testing of calculation methods for turbulent flows, pp 25-31, University of Karlsruhe, Germany (1995)

  44. S. K. Hannani, M. Stanislas and P. Dupont, Calcul d�ecoulement incompressible avec differentes element vitesse-pression,  3�eme Colloque des thesards de l�intergroupe des Ecoles Centrales, Lyon, Juin (1995)

  45. S. K. Hannani, M. Stanislas and P. Dupont, Incompressible Navier-Stokes computations with stabilized bilinear and biquadratic equal order interpolation velocity-pressure elements, Third World Congress on Computational Mechanics, Vol 1. pp 306-308, Chiba, Japan (1994)

  46. S. K. Hannani, M. Stanislas and P. Dupont, FE simulation of the backward-facing step flow with stabilized bilinear and biquadratic equal order interpolation, ASME FED-Vol. 200, Edited by Dhuabdadel, Habashi and Engelman, Proceedings of the ASME 94 Congress, pp 1-9 (1994)

  47. S. Sadeghipour and S. K. Hannani, Transient natural convection from a horizontal cylinder confined between vertical walls- A finite element solution, Second World Congress on Computational  Mechanics, Vol 2. pp 318-320, Stuttgart, Germany (1990)

 

 

Books

 

S. K. Hannai and M. K. Jeddi, An Introduction to Engineering

Thermodynamics, Sharif University Publishers, Tehran, Iran, in Farsi language(October 2012)

 

7. Distinctions

- Distinguished Professor of School of Mechanical Engineering for Excellence in Teaching, academic year 2005-2006, Sharif University of Technology

- Favorite Professor of School of Mechanical Engineering (elected by Office of Students Extra-Curricular Activities), academic year 2006-2007, Sharif University of Technology

- Distinguished Industrial Oriented Researcher of Sharif University of Technology, academic year 2006-2007

- Ranked as best student during under-graduate education

- Ranked as best student during graduate education

 

8. Academic & Executive Positions

- Chair of Mechanical Engineering Department, Sharif University of Technology  (Dec 2017-present)

- Dean of Undergraduate and Graduate Education, Sharif University of  Technology,  International Campus (Sept  2015-Sept 2017)

- Member of Board of Managers of Iranian Society of Mechanical Engineers,  (21st March 2011-21st March 2013)

- Associate Dean of Mechanical Engineering School for Graduate Studies and  Research, (December 2012-November 2014), Sharif University of Technology 

- Director of CEEC (Center of Excellence in Energy Conversion), (June 2003-June  2007)

- Director of Thermo-Fluid Division (June 2003- June 2007), Sharif University of Technology

- Assistant Professor (1996-2004), Sharif University of Technology

- Associate Professor (2004-2008), Sharif University of Technology

- Professor (2008-present),  Sharif University of Technology

- Vice-Chancellor for Academics Affaires, Sharif University of Technology,  International Campus (Sept 2008- Sept 2009)

- Dean of School of Science and Engineering, Sharif University of Technology, International Campus (Sept  2009-Sept 2010)

- Director of Internal Combustion Engine Master and Doctoral Program,  Mechanical Engineering, Department, Sharif University of Technology (Sept  2008-Sept 2012)

- Director of Student Affaires (1998-2000), Mechanical Engineering Department,   Sharif University of Technology

 

9. Technical/Professional Experiences 

Consultant Engineer at ARJ Company (Manufacturer of Home Appliances) 1989-1991

Consultant Engineer at AZEMAYESH Company (Manufacturer of Home Appliances) 1997-1998

Consultant at MEGA MOTORS (Manufacturer of Engine, Gear-Box and Axle) 1998-2000

 

 

10. Funded Projects Sponsored by the Industry 

1. Optimization of Energy Consumption of Household Appliances (2001)

2. Residential Energy Consumption Survey (2001)

3. Optimization of Energy Consumption of Cooking Pots Using Experimental  and Numerical Methods (2002)

 

 

 

�2013 Hannanii

1

1