1. Sina Salehi, Hossein Afshin, Bijan Farhanieh, Numerical Investigation of the Inlet Baffle, Header Geometry and Triangular Fins Effects on Plate-Fin Heat Exchangers Performance, Heat Transfer Engineering 2015; 36(10). DOI:10.1080/01457632.2015.1003720.

 

  1. Sepideh Esmaeili Rad, Hossein Afshin, Bijan Farhanieh, Heat Transfer Enhancement in Shell-and-Tube Heat Exchangers Using Porous Media, Heat Transfer Engineering 2015; 36(3). DOI:10.1080/01457632.2014.916155.

 

  1. Mohammad Jafari, Hossein Afshin,  Bijan FarhaniehHamidreza Bozorgasareh, Numerical Aerodynamic Evaluation and Noise Investigation of a Bladeless Fan, Journal of Applied Fluid Mechanics 2015; 8(1).

 

  1. Atta Sojou,  Hossein Afshin, Bijan Farhanieh, An analysis of carbone monoxide distribution in large tunnel fires, Journal of Mechanical Science and Technology 2014; 28(5):1917-1925. DOI: 10.1007/s12206-014-0339-4.

 

  1. Rouhollah Ganjiazad,  Ali Kazemipour,  Hossein Afshin, Bijan Farhanieh, Numerical Studies on the Performance of Saccardo Ventilation System in Emergency Fire Scenarios, Applied Mechanics and Materials 2014; 527:146-151. DOI:10.4028/www.scientific.net/AMM.527.146.

 

6.      Sajad Alimohammadi, Tim Persoons, D. B. Murray, Mohamad Reza Soleimani Tehrani, Bijan Farhanieh, Juergen KoehlerA Validated Numerical-Experimental Design Methodology for a Movable Supersonic Ejector Compressor for Waste-Heat Recovery, ASME Journal of Thermal Science and Engineering Applications DOI: 10.1115/1.4025090, 2014.

 

7.      S. Salehi, H. Afshin, B. Farhanieh, Numerical Investigation of the Inlet Baffle, Header Geometry and Triangular Fins Effects on Plate-Fin Heat Exchangers Performance, Heat Transfer Engineering, 2014 (accepted for publication)

 

8.      S. Esmaeili Rad, H. Afshin, B. Farhanieh, Heat transfer enhancement in shell- and-tube heat exchanger using porous media, Heat Transfer Engineering, 2014 (accepted for publication)

 

9.      A. Sojoudi H. Afshin, B. Farhanieh, An Analysis of Carbon Monoxide Distribution in Large Tunnel Fires, Journal of Mechanical Science and Technology, 2014, (accepted for publication)

 

10.  M.  jafari, H. Afshin, B. Farhanieh, H. Bozorgasareh, Numerical Aerodynamic Evaluation and Noise Investigation of a Bladeless Fan, Journal of Applied Fluid Mechanics, 2014, (accepted for publication)

 

11.  A. Abdalisousan, M. Fani, B. Farhanieh, Effect of Decision Variables in the Steam System in the Exergoeconomic Analysis of TCCGT Power Plant: A Case Study, Energy & Environment Journal, 2014, (accepted for publication)

 

12.  Reza Maddahian, Bijan Farhanieh, Numerical investigation of cone angle effect on the flow field and sparation efficiency of deoiling hydrocyclones, Heat and Mass Transfer, Vol. 49, No. 2, 2013.

 

13.  M. Saidi, R. Madahhian, B. Farhanieh, H. Afshin  Modeling of flow field and separation efficiency of a deoiling hydrocyclone using Larg Eddy Simulation, International Journal of Mineral Processing, 112-113, pp. 84-93, 2012.

 

14.  Reza Maddahian, Azadeh Kebriaee, Bijan Farhanieh, Bahar Firoozabadi, Analytical investigation of boundary layer growth and swirl intensity decay rate in a pipe, Archive of Applied Mechanics, Vol. 81, No. 4, pp. 489-501, 2011.

 

  1. Ehsan Faghani, Simin Dokht Saemi, Reza Maddahian, Bijan Farhanieh, On the effect of inflow conditions in simulation of a turbulent round jet , Archive of Applied Mechanics, pp. 1-15, 2011.

                  

16.  R. Maddahian, B. Farhanieh, B. Firoozabadi, Turbulent flow in converging  nozzles, part one: boundary layer solution, Applied Mathematics and Mechanics, Vol. 32, No. 5, pp. 645-662, 2011.

17.  I. Chitsaz and B. Farhanieh, Numerical investigation of thermo-fluid dynamics of two triangular jets, Mechanics, Vol. 17, No. 2, pp. 149-155, 2011.

 

18.  S. Karami, Bijan Farhanieh, Numerical modeling of incline plate LiBr absorber, Heat Mass Transfer, Vol. 47, No. 3, pp. 259-267, 2011.

19.  M. Fani, B. Farhanieh, A. Mozafari, Exergoeconomic Optimization of Black Liquor Gasification Combined Cycle Using Evolutionary and Conventional Iterative Method, International Journal of Chemical Reactor Engineering, Vol. 18, 2010.

 

  1. M. Fani, A. Mozafari, B. Farhanieh, Evolutionary Algorithm for Reversed Iterative Optimization Method Accuracy Inspection Applied for Energy and Economic Optimization of a Pulp and Paper Mill, International Journal of Exergy, Vol. 7, No. 3, 2010.

 

  1. E. Faghani, S.D. Saemi, R. Maddahian, B. Farhanieh, On the effect of inflow condition in simulation of a turbulent round jet, Arch Appl Mech, 24 Dec., 2010.

 

  1. R. Maddahin, B. Farhanieh, Numerical investigation of thermo fluif mechanics of differentially heated rotating tube, Heat Transfer Engineering, Vol. 31, No. 3, pp. 201-211, 2010.

23.  M Fani, A A Mozafari, B Farhanieh , Coordination of Process Integration and Exergoeconomic Methodology for Analysis and Optimization of a Pulp and Paper Mill, Scientica Iranica, Transaction B: Mechanical Engineering, Vol. 16, No. 4, pp. 301-312, 2009.

 

  1. S. Karami and B. Farhanieh, A numerical study on the absorption of water vapor into a film of aqueous LiBr falling along a vertical plate, Heat and Mass Transfer, Vol. 46, No. 1, pp. 197-207, 2009.

 

  1. E. Faghani, S.D. Saemi, R. Maddahian, B. Farhanieh, Numerical investigation of corner angle and wing number effects on fluid flow characteristics of a turbulent stellar jet, Heat Mass Transfer, Vol. 46, pp. 25-37, 2009.

 

  1. R. Arazgaldi, A. Hajilouy, B. Farhanieh, Experimental and numerical investigation of marine propeller cavitation, Scientia Iranica, Transaction B: Mechanical Engineering, Vol. 16, No. 6, pp. 525-533, 2009.

 

  1. E. Faghani, R. Maddahian, P. Faghani, B. Farhanieh, Numerical investigation of turbulent free jet flows issuing from rectangular nozzles: the influence of small aspect ratio, Arch Appl Mech, 2009.

 

  1. A. Azimi, S. K. Hannani, B. Farhanieh, Structured multiblock body fitted grids solution of transient inverse heat conduction problems in an arbitrary geometry, Numerical Heat Transfer, Part B, Vol. 54, pp. 260-290, 2008.

 

  1. A. Azimi, S. K. Hannani, and B. Farhanieh, Implementation of geometrical domain decomposition method for solution of axsymmetric  transient inverse heat conduction problems, Heat Transfer Engineering, Vol. 29, No. 3, pp. 255-271, 2008.

 

  1. A. Mehdizadeh, B. Firoozabadi, B. Farhanieh, Numerical simulation of turbidity current using , Jounal of Applied Fluid Mechanics, Vol. 1, No. 2, 2008.

 

  1. B. Farhanieh, M. M. Heydari, An inverse problem method for overall heat transfer coefficient estimation in a partially filled cylinder, Heat Transfer Engineering, Vol. 29, No. 3, 2008.

 

  1. R. Roshandel, B. Farhanieh, The effects of non-uniform distribution of catalyst loading on polymer electrolyte membrane fuel cell performance, International Journal of Hydrogen Energy, Vol. 32, pp. 4424-4437, 2007.

 

33.  N. Khakzad, B. Firoozabadi, and B. Farhanieh, Numerical Investigation of Steady Density Currents Flowing Down an Incline Using Turbulence Model, Journal of Fluids Engineering-transactions of The Asme - J FLUID ENG., Vol. 129, No. 9, 2007.

 

  1. R. Roshandel, B. Farhanieh, Numerical simulation of non-uniform gas diffusion layer porosity effect on polymer electrolyte membrane fuel cell performance, International Journel of Engineering, Transaction B: application, Vol. 20, No. 2, Auguste 2007.

 

  1. N. Amanifard, B. Farhanieh, and K. Ghorbanian, Numerical Investigation of Rotating-Stall in a stage of an Axial Compressor with Two Different Approaches,  Journal of Aerospace Science and Technology(JAST), Vol. 4, No. 1, pp. 1-9, 2007.

 

  1. A. Azimi, H. Fazeli, and B. Farhanieh, Investigation of Mach-number effects on roll moment of wrap-around-fin projectiles using thin-layer Navier-Stokes equations, Computational Fluid Dynamics Journal, Vol. 15(1): 2, pp. 9-17, April 2006.

 

  1. A. Azimi, B. Farhanieh, and S. K. Hannani, Solution of axisymetric transient inverse heat conduction problem using parameter estimation and multi block method, Computational Fluid Dynamics Journal, Vol. 15(1): 1, pp. 1-8, April 2006.

 

  1. S. Sattari and B. Farhanieh, A parametric study on radiant floor heating system performance, Renewable Energy, Vol. 31, pp. 1617-1626, 2006.

 

  1. B. Farhanieh and S. Sattari, Comparing zonal and CFD model predictions of indoor airflow subjected by solar and longwave radiations, IASME TRANSACTIONS on HEAT AND MASS TRANSFER, Issue 1, Volume 2, pp. 62, October 2006.

 

  1. M. Akbari and B. Farhanieh, Numerical Investigations of Heat Transfer and Pressure Drop of Condensation in Streamwise-Periodic Herringbone-Type Plate Channels, International Journal of Heat Exchanger, Vol. VII, isuue 1, 2006.

 

  1. B. Farhanieh and A. Sattari, Simulation of energy saving in Iranian buildings using integrative modeling for insulation, Renewable Energy, Vol. 31, pp.417-425, 2006.

 

  1. B. Farhanieh and A. Sattari, Development of an integrated model for airflow in building spaces, Renewable Energy, Vol. 31, pp.401-416, 2006.

 

  1. A. Azimi, S. K. Hanani, B. Farhanieh, Structured multiblock grid solution of two-dimensional transient inverse heat conduction problems in Cartesian coordinate system, Numerical Heat Transfer, Part B., Vol. 48, pp. 571-590, 2005.

 

  1. B. Farhanieh and S. Sattari, Behavior of solar and long wave radiations on indoor airflow, IASME TRANSACTIONS on HEAT AND MASS TRANSFER, Issue 8, Volume 2, pp. 1483, October 2005.

 

  1. R. Roshandel, M. Maghsodi, B. Farhanieh, The effect of using magnet particles in cathode on PEM fuel cell performance, Iranian Journal of Chemical Engineering., No. 18, 2005.

 

  1. H. Fazeli, A. Azimi, B. Farhanieh, Computation of three-dimensional supersonic turbulent flows over wrap-around fin projectiles using pc, Scientia Iranica, Vol. 12, No. 2, spring 2005.

 

  1. S. Sattari and B. Farhanieh, Comparison between finite-difference methods, finite-elements and finite-volume methods for prediction of heat phenomena in a 2-d composite block, Iranian Journal of Energy, Vol. 9, No. 20, pp. 41-53, Nov., 2005.

 

  1. S. Sattari and B. Farhanieh, Comparison between Various calculation methods of energy simulations in bulding software such as ENERGY, PLUS, Blast, and BDA, Iranian Journal of Energy., Vol. 9, No. 21, Feb. 2005.

 

  1. B. H. Bheshti, B. Farhanieh, K. Ghorbanian, J. A. Teixeira and P. C. Ivey, Performance enhancement in transonic axial compressors using blade tip injection coupled with casing treatment, Journal of Power and Energy, Vol. 219 Part A, 2005.

 

  1. F. Babadi and B. Farhanieh, Characteristics of heat and mass transfer in vapor absorption of falling film flow on a horizontal tube, Int. Comm. Heat and Mass Transfer, Vol. 35, pp. 1253-1265, 2005.

 

  1. R. Roshandel, B. Farhanieh and E. Saievar-Iranzad, The effects of porosity distribution variation on pem fuel cell performance, Renewable Energy, Vol. 30, Issue 10, pp. 1557-1572, 2005.

 

  1. B. Farhanieh and F. Babadi, Vapor absorption into liquid films flowing over a column of cooled horizontal tubes, Scientia Iranica, Vol. 11, No 4, pp., 2004.

 

  1. H. Fazeli, A. Azimi and B. Farhanieh, Numerical investigation of 3-dimensional supersonic turbulent flow characteristics over wrap-around fin configurations, Journal of Engineering, Vol. 14, No. 2, pp. 99-111, 2004.

 

  1. B. Beheshti, J. Teixira, P. Ivey, K. Ghorbanian and B. Farhanieh, Paramtric study of tip clearance-casing treatment on performance and stability of a transonic axial compressor, ASME Journal of Turbomachinery, Vol. 126, pp. 527-535, 2004.

 

  1. A. H. Kakaee and B. Farhanieh, Development of a moving finite element-based inverse heat conduction method for determination of moving surface temperature, IJE Transactions A: Basics, Vol. 17, No. 3, pp. 281-292, 2004.

 

  1. M. Karzar jeddi, S. Kazemzadeh and B. Farhanieh, Study of mixed-convection heat transfer from an impinging jet to a solid wall using a finite-element method-application to cooktop modeling, Numerical Heat Transfer, Part B, Vol. 46, pp. 1-11, 2004.

 

  1. A. H. Kakaee and B. Farhanieh, Investigating the effect of different conventional regularization methods on convergence in mving boundary inverse heat conduction problems, Scientia Iranica, Vol. 11, Nos. 1&2, pp. 104-113, 2004.

 

  1. B. Farhanieh, N. Amanifard and K. Ghorbanian, A Numerical comparison of 2-d inviscid and viscous approaches for flow through a stage of an axial compressor, Scientia Iranica, Vol. 11, Nos. 1&2, pp. 128-137, 2004.

 

  1. B. Firoozabadi, B. Farhanieh and M. Rad, Hydrodynamics of two-dimensional laminar turbid density currents, Journal of Hydraulic Research, Vol. 41, No. 6, pp. 623-630, 2003.

 

  1. B. Farhanieh, N. Amanifard and K. Ghorbanian, A numerical investigation on the unstable flow in a single stage of an axial compressor, IJE Transactions A: Basics, Vol. 16, No. 2, pp. 171-182, 2003.

 

  1. B. Farhanieh, A.H. Kakaee and Y. Khodadadeh, Numerical and experimental investigation of heat transfer characteristics in a new designed non-electric incubator using chemical heat source, Jour. of Engineering, Vol. 13, No. 3, pp. 147-159, 2003.

 

  1. B. Farhanieh, N. Amanifard and K. Ghorbanian, A 2-d numerical investigation on the modal charachteristics of rotating-stall with a variable-cascade-length approach in an axial compressor, IJE Transactions B: Applications, Vol. 16, No. 1, pp. 81-89, 2003.

 

  1. B. Firoozabadi, B. Farhanieh and M. Rad, Hydrodynamics of two-dimensional laminar turbid density currents, Scientia Iranica, Vol. 10, No. 1, pp. 122-130, 2003.

 

  1. B. Farhanieh, N. Amanifard and K. Ghorbanian, Numerical investigation on compressible flow characteristics in axial compressors using a multi-block finite-volume scheme, IJE Transactions A: Basics, Vol. 15, No. 1, pp. 91-104, 2002.

 

  1. A. H. Kakaee and B. Farhanieh, Investigation of different regularization parameter in inverse heat conduction problem using finite-element method, International Journal of Engineering Science, University of Science an Technology, Vol. 13, No. 4, pp. 173-190, 2002.

 

  1. B. Farhanieh and A. H. Kakaee, Surface temperature determination of a moving boundary using sensitivity analysis, Journal of Sharif, Sharif University of Technology, No. 21, 2002.

 

  1. M. R. Soltani, H. Fazeli, B. Farhanieh and A. R. Davari, An experimental study of the aerodynamic behavior of two wrap around fin missiles,  Esteghlal, Yr. 21, No. 1, pp. 141-152, 2002.

 

  1. B. Farhanieh, B. Firoozabadi and M. Rad, The propagation of turbulent density currents on sloping beds, Scientia Iranica, Vol. 8, No. 2, pp. 130-137, 2001.

 

  1. B. Firoozabadi, M. Rad and B. Farhanieh, Experimental investigation of Hydrodynamic variation of turbidity current of fluid mud, International Journal of Engineering Science, University of Science an Technology, Vol. 12, No. 4, pp. 121-130, 2001.

 

  1. B. Firoozabadi, B. Farhanieh and M. Rad, Numerical investigation of the structure of density currents in a two dimensional channel, J. Esteghlal, Yr. 18, No. 2, pp. 155-169, 1999.

 

  1. V. Dehlaghi, B. Farhanieh and S. Kazemzadeh, Temperature distribution and freezing penetration depth in biological tissues in cryosurgery, Journal of Medical School of Ghazvim University, No. 9, pp. 47-53, 1999.

 

  1. B. Farhanieh, B. Firoozabadi and M. Rad, Numerical investigation of behavior and lateral propagation of three-dimensional density current, Journal of Tabriz University, No. 21, pp. 79-88, 1998.

 

  1. B. Farhanieh, M. Golafshani, S. Ekrami, Numerical investigation of fluid flow characteristics around slide gates using multi-zonal method, J. Esteghlal, Yr. 17, No. 1, pp. 85-107, 1998.

 

  1. B. Farhanieh, M. Golafshani and S. A. Shayeste, Numerical solution of compressible flows using a pressure-based method, Iranian Journal of Science & Technology, Vol. 22, No. 3, Transaction B, pp. 329-346, 1998.

 

  1. B. Farhanieh, Employment of differential stress model for investigation of turbulent fluid flow and heat transfer characteristics in a streamwise-periodic corrugated channel, J. Energy Heat Mass transfer, Vol. 18, pp. 113-125, 1996.

 

  1. B. Farhanieh, L. Davidson and B. Sunden, Employment of second-moment closure for calculation of turbulent recirculating flows in complex geometries with collocated variable arrangement, Int. Num. Meth. Fluids, Vol. 16, pp. 525-544, 1993.

 

  1. B. Farhanieh, Č. Herman and B. Sunden, Numerical and experimental analysis of laminar fluid flow and forced convection heat transfer in a grooved duct, Int, J. Heat Mass Transfer, Vol. 36, No. 6, pp. 1609-1617, 1993.

 

  1. B. Farhanieh and B. Sunden, Numerical investigation of turbulent fluid flow and heat transfer characteristics in a streamwise-periodic corrugated duct with constant cross-sectional area, Int. Num. Meth. Heat Fluid Flow, Vol. 3, pp. 15-33, 1993

 

  1. B. Farhanieh and B. Sunden, Numerical investigation of periodic laminar heat transfer and fluid flow characteristics in parallel plate ducts with streamwise-periodic cavities, Int. Num. Meth. Heat Fluid Flow, Vol. 1, pp. 143-157, 1991.

 

  1. B. Farhanieh and B. Sunden, Three-dimensional laminar flow and heat transfer in the entrance region of trapezoidal ducts, Int. Num. Meth. Fluids, Vol. 13, pp. 537-556, 1991.