1. M. R. Mousavi, J. Arghavani, A thermodynamically consistent two-dimensional constitutive model for magnetic shape memory alloys, Modares Mechanical Engineering, Vol. 16, No. 12, pp. 1-11, 2016 (in Persian)
  2. M. R. Mousavi, J. Arghavani, A three-dimensional constitutive model for magnetic shape memory alloys under magneto-mechanical loadings, Smart Materials and Structures, volume 26, 2016.
  3. M.J. Ashrafi, J. Arghavani, R. Naghdabadi, S. Sohrabpour, F. Auricchio, Theoretical and numerical modeling of dense and porous shape memory alloys accounting for coupling effects of plasticity and transformation, International Journal of Solids and Structures, Volumes 88–89, 15 June 2016, Pages 248–262
  4. H. Khajehsaeid, S. Reese, J. Arghavani, R. Naghdabadi, Strain and stress concentrations in elastomers at finite deformations: effects of strain-induced crystallization, filler reinforcement, and deformation rate, Acta Mechanica, 2016, Volume 227, Issue 7, pp 1969–1982.
  5. S.  Poorasadion, J Arghavani, R Naghdabadi, S Sohrabpour, Implementation of microplane model into three-dimensional beam element for shape memory alloys, International Journal of Applied Mechanics, 2015
  6. A. Ostadrahimi, J. Arghavani, S.  Poorasadion, An analytical study on the bending of prismatic SMA beams, Smart Materials and Structures 24, 2015.
  7. MJ Ashrafi, J Arghavani, R Naghdabadi, F Auricchio, A three-dimensional phenomenological constitutive model for porous shape memory alloys including plasticity effects, Journal of Intelligent Material System and Structures, 1-17, 2015.
  8. MJ Ashrafi, J Arghavani, R Naghdabadi, S Sohrabpour, A 3-D constitutive model for pressure-dependent phase transformation of porous shape memory alloys, Journal of Mechanical Behavior of Biomedical Materials, 42, 292-310, 2015
  9. H.  Khaje-Saeid, J. Arghavani, R. Naghdabadi,  S. Sohrabpour,A visco-hyperelastic constitutive model for rubber-like materials A rate-dependent relaxation time scheme, International Journal of Engineering Science, 79, 44-58 , 2014.
  10. M.  Sharifi, J. Arghavani, M.R. Hematiyan, Optimum Arrangement  of Layers in Multi-layer Compound Cylinders, International Journal of Applied Mechanics, accepted, 2014
  11. M.  Baghani, J. Arghavani, R. Naghdabadi,  A finite deformation constitutive model for shape memory polymers based on Hencky strain,   Mechanics of Materials 73, 1-10, 2014.
  12. M.  Salehi, H. Hamedi, H. Salmani Nohouji, J. Arghavani, Mechanical properties identification and design optimization of nitinol shape memory alloy microactuators, Smart Materials and Structures 23, 2014.
  13. S.  Poorasadion, J. Arghavani, R. Naghdabadi, S. Sohrabpour, An improvement on the Brinson model for shape memory alloys with application to two-dimensional beam element,  Journal of Intelligent Material Systems and Structures, 2013.
  14. B. Fereydoonnezhad, R. Naghdabadi, J. Arghavani, A hyperelastic constitutive model for fiber-reinforced rubber-like materials,   International Journal of Engineering Sciences, accepted, 2013.
  15. A Khayer Dastjerdi, R. Naghdabadi, J. Arghavani, An energy-based approach for analysis of dynamic plastic deformation of metals in Taylor impact test,   International Journal of Mechanical Sciences, accepted, 2012.
  16. H. Khaje-Saeid, J. Arghavani, R. Naghdabadi,  A hyperelastic constitutive model for rubber-like materials, European Journal of Mechanics - A/Solids, accepted, 2012.
  17. M. Sharifi, M.R. Hematiyan, J. Arghavani, An Analytical Solution for Optimum Design of Shrink-fit Multi-layer Compound Cylinders, International Journal of Applied Mechanics, accepted, 2012.
  18. M. Baghani, R. Naghdabadi, J. Arghavani, A large deformation framework for shape memory  polymers: Constitutive modeling and finite element implementation,  Journal of Intelligent Material Systems and Structures, in press, 2012.
  19. M. Baghani, R. Naghdabadi, J. Arghavani, S. Sohrabpour, A thermodynamically-consistent 3D constitutive model for shape memory polymers, International Journal of Plasticity, 35, 13-30, 2012.
  20. R. Naghdabadi, M. Baghani, J. Arghavani, A viscoelastic constitutive model for compressible polymers based on logarithmic strain and its finite element implementation, Finite Elements in Analysis and Design, 62, 18-27, 2012.
  21. R. Naghdabadi,  M. J. Ashrafi, J. Arghavani, Experimental and Numerical Investigation of Pulse-shaped Split Hopkinson Pressure Bar Test, Materials Science and Engineering A, 539, 285–293, 2012.
  22. M. Baghani, R. Naghdabadi, J. Arghavani, A semi-analytical study on helical springs made of shape memory polymer, Smart Materials and Structures 21, 045014, 2012.
  23. M. Baghani, R. Naghdabadi, J. Arghavani, S. Sohrabpour, A constitutive model for shape memory polymers with application to torsion of prismatic bars, Journal of Intelligent Material Systems and Structures, 23(2) 107–116, 2011.
  24. J. Arghavani, F. Auricchio, R. Naghdabadi, A finite strain kinematic hardening constitutive model based on Hencky strain: general framework, solution algorithm and application to shape memory alloys.  International Journal of Plasticity, 27, 940-961, 2011.
  25. A. Parvizi, R. Naghdabadi, J. Arghavani, Analysis of Al A359/SiCp Functionally Graded Cylinder Subjected to Internal Pressure and Temperature Gradient with Elastic-plastic Deformation, Journal of Thermal Stresses, 34, 1-17, 2011.
  26. J. Arghavani, F. Auricchio, R. Naghdabadi, A. Reali, An improved, fully symmetric, finite strain phenomenological constitutive model for shape memory alloys. Finite Elements in Analysis and Design, 47, 166-174, 2011.
  27. J. Arghavani, F. Auricchio, R. Naghdabadi, A. Reali. On the robustness and efficiency of integration algorithms for a 3D finite strain phenomenological SMA constitutive model. International Journal for Numerical Methods in Engineering, 85, 107-134, 2011.
  28. J. Arghavani, F. Auricchio, R. Naghdabadi, A. Reali, S. Sohrabpour, A 3D finite strain phenomenological constitutive model for shape memory alloys considering martensite reorientation. Continuum Mechanics and Thermodynamics, 22, 345-362, 2010.  
  29. J. Arghavani, F. Auricchio, R. Naghdabadi, A. Reali, S. Sohrabpour. A 3-D phenomenological model for shape memory alloys under multiaxial loadings. International Journal of Plasticity, 26, 976-991, 2010.
  30. M. H. Kargarnovin, S. A. Faghidian, J. Arghavani, Limit analysis of FGM circular plates subjected to arbitrary rotational symmetric loads, International Journal of Aerospace and Mechanical Engineering, 1(4), 190-195, 2008.
  31. K. Behfar, R.Naghdabadi, J. Arghavani, M. Asghari, General Basis Free Relations for Conjugate Strains of Eshelby-like Stress Tensors, Mechanics of Materials 39, 637-642, 2007.




Publications

Sharif University of Technology, School of Mechanical Engineering

B. Journal papers A. Book

1.J. Arghavani, R. Naghdabadi, F. Auricchio, Shape memory alloys under multiaxial loadings: constitutive modeling and numerical implementation, LAMBERT Academic Publishing, Germany, ISBN: 978-3-8473-0509-5, 2012.


C. Conference papers
  1. R. Naghdabadi, M. J. Ashrafi, J. Arghavani,  Characterizing dynamic behavior of metals, polymers and concretes   using split Hopkinson pressure bar test,  The Bi-Annual international Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2014), Tehran, Iran, 2014.
  2. M. J. Ashrafi, J. Arghavani, S. Sohrabpour, Pseudoelastic behavior of porous shape memory alloys under axial and hydrostatic loadings, 21th Annual International Conference on Mechanical Engineering-ISME2013, Tehran, Iran, 2013.
  3. B. Fereidoonnezhad,   J. Arghavani, R. Naghdabadi, A fiber-reinforced transversely isotropic strain energy function for liver tissue, 20th Annual International Conference on Mechanical Engineering-ISME2012, Shiraz, Iran, 2012.
  4. M. Hamedi, H. Salmani, M. Salehi, J. Arghavani, Optimum design of a microgripper with accumulative movement of shape memory alloy actuators, Proceedings of AMPC2013, Feb. 2013, Chennai, India.
  5. M. Baghani R. Naghdabadi J. Arghavani, Numerical study of helical extension springs made of shape memory polymer based foams, 20th Annual International Conference on Mechanical Engineering-ISME2012, Shiraz, Iran, 2012.
  6.  M. J. Ashrafi, J. Arghavani, R. Naghdabadi, An efficient Signal processing technique for split Hopkinson pressure bar test, The international Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2012), Tehran, Iran, 2012.
  7. A Eivazi, R. Naghdabadi, J. Arghavani, Experimental investigation of grooves geometry on the performance of rupture discs, The international Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2012), Tehran, Iran, 2012.
  8. J. Arghavani, F. Auricchio, Toward an efficient integration algorithm: Logarithmic versus exponential mapping, XI International Conference on Computational Plasticity. Fundamentals and Applications, COMPLAS XI, 2011.
  9. S. Sohrabpour, R. Naghdabadi, J. Arghavani, Logarithmic measures in plasticity, 5th National Conference of Metals and Materials Forming MATFORM’90, Sharif University of Technology, Tehran, Iran, 2011.
  10. J. Arghavani, F. Auricchio, R. Naghdabadi, A. Reali. On the constitutive modeling and numerical implementation of shape memory alloys under multiaxial loadings - Part I: constitutive model development at small and finite strains, Proceedings of the School and Symposium on Smart Structural Systems Technologies (S3T2010), Porto, Portugal, 2010.
  11. J. Arghavani, F. Auricchio, R. Naghdabadi, A. Reali. On the constitutive modeling and numerical implementation of shape memory alloys under multiaxial loadings - Part II: numerical implementation and simulations, Proceedings of the School and Symposium on Smart Structural Systems Technologies (S3T2010), Porto, Portugal, 2010.
  12. J. Arghavani, F. Auricchio, A. Reali, S. Sohrabpour. A class of shape memory alloy constitutive models based on a new set of internal variables, Proceedings of ISME2010, 18th Annual International Conference on Mechanical Engineering, Tehran, Iran, 2010.
  13. J. Arghavani, F. Auricchio, R. Naghdabadi, A. Reali. A finite strain SMA constitutive model: comparison of small and finite strain formulations, Proceedings of ISME2010, 18th Annual International Conference on Mechanical Engineering, Tehran, Iran, 2010.
  14. J. Arghavani, F. Auricchio, R. Naghdabadi, A. Reali, S. Sohrabpour. An efficient, non-regularized solution algorithm for a  finite strain shape memory alloy constitutive model, Proceedings of ESDA2010, 10th Biennial Conference on Engineering Systems Design and Analysis, Istanbul, Turkey, 2010.
  15. F. Auricchio, J. Arghavani, M. Conti, S. Morganti, A. Reali, U. Stefanelli. Shape-memory  alloys: effective 3D modeling, computational aspects and analysis of actuator and biomedical devices, Proceedings of ACTUATOR10 - International Conference and Exhibition on New Actuators and Drive Systems, Bremen, Germany, 2010.
  16. R. Naghdabadi, J. Arghavani, F. Auricchio, A. Reali, S. Sohrabpour. Computational Issues in Finite Strain SMA Constitutive Modeling, Proceeding of IV European Congress on  Computational Mechanics (ECCM IV): Solids, Structures and Coupled Problems in Engineering, Paris, France , 2010.
  17. R. Avazmohammadi, J. Arghavani, R. Naghdabadi, Micromechanics modeling of shape memory alloy fiber composites with slightly weakened interfaces, SPIE Smart Materials, Nano-and Micro-Smart Systems, Melborne, Australia, 2008.
  18. A. N. Sohi, R. Naghdabadi, J. Arghavani, Axial stability of externally pressurized carbon nanopeapods, 2nd conference on nanostructures (NS2008), Kish island, Iran, 2008.
  19. J. Arghavani, K. Behfar,Vibration of Euler-Bernoulli Beam with Varying Cross-Section Carrying Multiple Pointed Masses, International Conferece on Computational & Experimental Engineering and Science(ICCES'05), India, 2005. n